02
April
2011

If you have questions, just ask them here, i`ll reply fast !

Comments (1100)

  • Bfluxm
    Bfluxm
    08 August 2012 pm31 21:46 |

    Hi Petrut,

    I hope your patch will work with my GPS : it comes from Witson ( http://www.witson.com/en/displayproduct.html?proID=100472098)

    BSP Version : AIVCE6EVB_Rel1.00.5.02
    AT8X0 6.0
    Windows Embedded CE 6.0
    117 MB RAM
    ARM1136JF-S AT840
    480x234 pixels, 65536 colours

    I have read some comment about this version but not in this kind of resolution...

    Thanks for your answer.

    • Bfluxm
      Bfluxm
      09 August 2012 pm31 12:23 |

      Here information about partition :

      \\Plugins
      GPSData
      My Documents
      NFlash
      Program files
      StorageCard
      Temp
      Windows
      (Chinese writing)
      (Chinese writing)

      • Petrut
        Petrut
        13 August 2012 am31 06:49 |

        buy custom patch for it and install it.
        then i`ll send a simple fix for your resolution.

  • david
    david
    05 August 2012 pm31 14:06 |

    hey i got a D99 dynavin wince 6
    what kind of patches do i need to purchase for the i phone menu look and the ability to use my smartphone as modem?

    • Petrut
      Petrut
      06 August 2012 pm31 14:38 |

      item 1 from wince 6 section, wifi patch and a edimax 7711 series adaptor

      • david
        david
        07 August 2012 am31 01:58 |

        thanks! i got a belkin n300 adapter u think it works?

        • Petrut
          Petrut
          07 August 2012 am31 09:44 |

          Have no idea. See the wifi info section

  • Alexandre
    Alexandre
    01 August 2012 pm31 20:19 |

    Hello,

    Can you check if the patch will work in my unit?
    It's a RoadRover for the Peugeot 408.

    http://www.roadrover.cn/e/products_view.php?id=79

    OS: EN-PRIMA-ARM-SLC-V1.50
    MCU: 9.02PG-7H7H6SR
    Windows CE 6.0.3122
    Access to USB files OK
    D2280

    The diagnostic screens are here:

    www.zooming.com.br/roadrover/2012-07-21 13.22.46.jpg
    www.zooming.com.br/roadrover/2012-07-26 12.38.09.jpg
    www.zooming.com.br/roadrover/2012-07-26 12.39.30.jpg
    www.zooming.com.br/roadrover/2012-07-26 12.39.45.jpg
    www.zooming.com.br/roadrover/2012-07-26 13.02.40.jpg
    www.zooming.com.br/roadrover/2012-07-26 13.04.25.jpg
    www.zooming.com.br/roadrover/2012-07-26 13.07.00.jpg
    www.zooming.com.br/roadrover/2012-07-26 13.07.47.jpg

    Thanks!
    Alexandre

    • Petrut
      Petrut
      03 August 2012 am31 06:31 |

      Works
      See custom section

  • Igor
    Igor
    01 August 2012 pm31 12:26 |

    Hi, i have a focus/mondeo chinese 2din, the info says it is SUN6
    Windows CE 5.0
    ARM926EJ S3C2450 (400MHz)
    800x480
    wich is as i think not corrent. What patch can i buy and when i buy it, do you have some firmware replacement because of the radio RDS system? When TA is set it is still seeking for stations and interrupts selected station.
    Best regards

    • Petrut
      Petrut
      01 August 2012 pm31 13:03 |

      no, my patch will work ONLY on wince section, not for radio, rds, etc
      You can use custom patch section to get the patch.

      • Igor
        Igor
        01 August 2012 pm31 14:55 |

        Hi, i would buy the patch, via the custom selection, but in my radio, there is only "StorageCard" folder, no flash folders are able to see, can you help me please select the correct patch version?
        The menu of the unit looks like the one in this link
        http://www.autobazar.eu/sk/2din-ford-autoradio-s-navigaciou-id3219256.html

        • Petrut
          Petrut
          01 August 2012 pm31 19:31 |

          that`s bad.
          the patch will not work properly and only iphone menu with programs will be available. If this is enough for you, buy any patch and i`ll manually send a SD only patch.

  • Lucas
    Lucas
    01 August 2012 am31 00:54 |

    HI, I have some cuestions about the patch. I have a booster DVD player (Citroen C4)
    this player include a plugin to recive information about oil, temperature, radar, wheel controls, etc.
    Can it work? my machine have a time problem (hour zone), gps soft not, is ok.
    It´s fixed?
    can this soft be spanish?
    Can I buy your soft? how can I do?
    (sorry for my English)
    Regards.
    Lucas

    • Petrut
      Petrut
      01 August 2012 pm31 13:02 |

      i`m not sure that my patch can help with your issues.

  • Robin
    Robin
    24 July 2012 am31 05:21 |

    Hi,

    i have a Maxyon Performace GPS + DVB-T + TMC (I think the same as a TID 7900),

    Novada 2450 (NWD_2450 multiplatform 6.0
    Win Embedded CE 6.0
    111 MB RAM
    ARM 1136 JF-S AT840
    800x480 pixels
    USB device is connected

    Can I use your Novada Patch?

    Thank you

    • Petrut
      Petrut
      24 July 2012 pm31 18:35 |

      yes

  • Tolo
    Tolo
    17 July 2012 pm31 12:40 |

    I have a Dynavin, and I would like upgrade to wince 6, is it possible?

    Thanks.

    • Petrut
      Petrut
      17 July 2012 pm31 20:35 |

      no

  • Dan
    Dan
    13 July 2012 pm31 22:21 |

    I followed your instructions for a custom patch and purchased one that matched my folder names. I can load the patch but it does not run. If I use WR-Tools task manager to kill main.exe I get the windows desktop but no start menu, and all menus are in chinese. Also no shortcuts on the desktop work.
    My unit is an Erisin ES1068V WR-Tools shows
    ALLWISEA5
    AT10X0A 6.0
    Windoes Embedded CE 6.0.3122
    119 MB RAM
    ARM1136JF-S AT550

    In file explorer, in the root there is the windows folder, program files, NandFlash, StorageCard, ResidentFlash plus some other folders

    • Petrut
      Petrut
      16 July 2012 am31 07:24 |

      send me pictures with errors to my email for better support.

  • mike
    mike
    12 July 2012 am31 07:32 |

    Hi Petrut,
    I have all patches brought and they works fine, now I install the ftdi driver and the wifi patch stopped working. I now you wrote in the instruction that it will give problems. Have you an idea what I can do to work with both drivers?

    • Petrut
      Petrut
      16 July 2012 am31 07:25 |

      is not possible.

  • ElectricJack2
    ElectricJack2
    08 July 2012 pm31 23:16 |

    Tried to send email but was returned. Is there still activity here?

    • Petrut
      Petrut
      11 July 2012 am31 06:16 |

      There is plenty of activity and support. Email is found in about us page

  • Marco
    Marco
    06 July 2012 am31 11:39 |

    Hi Petrut, this patch work with Erisin ES1068V GPS Model: SiRF IV

    thanks

    • Marco
      Marco
      06 July 2012 pm31 17:10 |

      sorry, another question.....is better..
      -Erisin ES1068V GPS Model: SiRF IV WinCE6
      or
      -Erisin ES796V CPU "SAMSUNG 2461" WinCE5

      Please help me to purchase..........

      • Petrut
        Petrut
        08 July 2012 am31 07:38 |

        i have no idea. both are ok. Buy the one you like. Custom patch is made to work on any of them.

        • Marco
          Marco
          08 July 2012 am31 11:54 |

          thanks mate

  • TrOjAn
    TrOjAn
    04 July 2012 pm31 19:48 |

    Any news on an update? you did sort of pencil in June ;)

    • Petrut
      Petrut
      05 July 2012 am31 06:10 |

      update? no updates... all patches are complete and working fine.

  • Marco
    Marco
    04 July 2012 am31 03:10 |

    Hey Petrut, great piece of work.

    I have bought your custom patch for my device which has 3 storage devices: "ResidentFlash", "NandFlash" and "StorageCard". I selected "ResidentFlash" and "Storagecard" from your custom page.

    When I got the package, I ran the installer but, while the files were written in the expected directory structure (as listed in the install.mscr) and the install succeeded and rebooted, the device returned to the standard "console" as the unit shipped with.

    The unit I have seems to have an "ALLWISE5 - AT10X0A 6.0 - Windows Embedded CE 6.0.3122 - 119 MB RAM - ARM1136JF-S AT550 - 800x480 Pixels - 65536 Colors" as a GPS card and I don't know if this is supported when you say you support "all devices".

    Any help to make my donation of $19.99 work would be much appreciated.

    Is it the matter of using a different storage location eg. "nandflash" instead of "residentFlash"? I think your install scripts use the device names to do that explicitly.

    I look forward to your response...

    Marco

    When

    • Petrut
      Petrut
      04 July 2012 am31 08:51 |

      the main interface will always be the same!
      you must launch my shell from the gps path, point to desktop.exe
      read the manual and the info about the patch...
      should work fine on your unit

  • Geir
    Geir
    03 July 2012 pm31 20:04 |

    Hello my friend. I installed your patch today awsome work. However it won't install it to my unit, it just install it on my sdcard. And i get errors on many of the programs to. It comes up with many chinese crap so is stored on my unit. Is there a way to get rid of the chinese crap. I can buy a new path from you money isen't a issue here.

    • Petrut
      Petrut
      11 July 2012 am31 06:21 |

      Most files are on sd. What errors you get? On wince 5 can't remove Chinese crap...

  • Manuel Bieber
    Manuel Bieber
    03 July 2012 pm31 19:04 |

    Dear Petrut,

    I enter in desktop, then in control panel, then network connection, and I need add and configure a new connection but I can´t put the phone number because there isn´t a Keyboard to write and configurate the new connection.
    In other places I can open the keyboard but is not possible to add a new connection.

    Can you bring me a solution?

    Thank you very much,

    Manuel Bieber

    • Petrut
      Petrut
      04 July 2012 am31 08:52 |

      you must set taskbar always on top from start menu options or from system tools app

      • Manuel Bieber
        Manuel Bieber
        09 July 2012 pm31 15:35 |

        We have set the taskbar the way you told me..
        Insist that the only problem is about how to connect to the Internet and not open ma keyboard to type configuration.

        Best regards!

        • Petrut
          Petrut
          11 July 2012 am31 06:19 |

          Start menu, settings, taskbar. Set it always on top. Then press the keyboard icon from right corner when needed

          • Manuel Bieber
            Manuel Bieber
            12 July 2012 pm31 20:14 |

            Dear Petrums,

            I find the keyboard and I am able to connect to the internet but I have the following questions.

            These are the data that I gave my cell phone company in my country:

            DIAL: * 99
            APN: apnumt.movistar.com.uy
            NAME: movistar
            PASSWORD: movistar

            If you can Show me as I make the settings according to the screens that opens.

            Thank you very much, best regards,

            Manuel Bieber

  • Geir
    Geir
    03 July 2012 pm31 13:23 |

    Thank you i will install it then. Is all the stuff in the patch now or should i add some more ?

  • Geir
    Geir
    02 July 2012 pm31 20:00 |

    Thank you for the patch but i don't think it is the right one.
    Will this work on WinCE 5.0 ? I think this is for the WinCE 6.0
    Is it possible to upgrade to WinCE 6.0 with custom patch?
    Here is the spec:

    SMDK 2450 Board 5.0
    Windows CE 5.0.1400
    102 MB RAM
    ARM920T S3c 2450 400 MHZ
    800x480 pixels 65536 colours

    • Petrut
      Petrut
      03 July 2012 am31 05:42 |

      just install it.
      i used wince 6 version and modified it for wince 5!
      you cant upgrade to wince 6

  • Geir
    Geir
    01 July 2012 pm31 15:41 |

    Hello petrut ! I have bought your patch and i think i found the solution of the problem. In my GPS is storagecard in one word. Not storage card as in your patch. Is it possible to build a new patch for my system ? My system is :

    SMDK 2450 Board 5.0
    Windows CE 5.0.1400
    102 MB RAM
    ARM920T S3c 2450 400 MHZ
    800x480 pixels 65536 colours



    This was the error i got when i tyyed to install your patch : couldn't create directory\storagecard\programfiles'
    line 36 storage card\wincepatch\install.mscr):
    Mkdir("\storagecard\program Files")

    • Petrut
      Petrut
      02 July 2012 am31 06:31 |

      actually you have storage card not storagecard
      email me this message, i`ll fix it today.

  • coco344
    coco344
    29 June 2012 am30 00:49 |

    plz. the navigation system in my multimedia is not work because of the windows ce 5 registry is damged

    now I cant enter to the windows from the sd memory of the navigation

    I do reset from the samll button thats in the front of the multimedia device but the problem is still

    there is usb port and iphone port for the multimedia but its for run music only from the flash memory and iphone because that I cant sync the multimedia device with the PC to solve the problem

    in the rear of the device there is port but not usb as shown in the pic by this links

    http://im26.gulfup.com/2012-06-24/1340570611451.jpg

    http://im26.gulfup.com/2012-06-24/1340570611332.jpg

    http://im26.gulfup.com/2012-06-24/1340570611263.jpg

    I go to the electronics shops but I did not find cable for this port

    plz. can you advice me what can I do how can I repair the windows

    if I setup new windows the program in the nand flash will be removed

    how can I do new setup and the device cant read from the sd-memory of the nav. system

    how can I sync the multimedia to the PC and how can I find the cable for this port

    the manfuacture for the device is caska

    Its for toyota Land cruiser

    I sent for the caska company 5 emails but they did not answer me

    plz. I need your help

    • coco344
      coco344
      29 June 2012 am30 00:54 |

      my device is 8" res. 800*480

      wince5

      • coco344
        coco344
        29 June 2012 pm30 18:30 |

        plz. if I install the patch it will solve the problem and how can I install it and the sd memory of the nav. system is not work

      • Petrut
        Petrut
        29 June 2012 am30 09:39 |

        nothing you or i can do, sorry. Only factory can help.

  • Arturo
    Arturo
    23 June 2012 am30 10:11 |

    Hi Petrut,
    I have a Novada 2450 (NWD_2450 multiplatform 6.0 - Win CE 6.0)
    111 MB RAM - ARM 1136 JF-S AT840 - 480x234 pixels.
    USB device is connected.
    Please, what's the best patch for me ?
    Actually TOMTOM scrash with "Enought memory !"
    Can I hope to use TOMTOM ?
    And better can I hope to use web with Wifi patch ? (and phone of course)
    Thanks
    A

    • Petrut
      Petrut
      23 June 2012 pm30 16:29 |

      if you dont have usb access from wince, wifi will not work.
      Tomtom have issues on wince 6, you can try my patch, it improves memmory anyway. Send me unit info, see the new custom section for files.

      • Petrut
        Petrut
        24 June 2012 pm30 21:04 |

        yes you can try it
        maybe will work
        if you have errors, make pictures and email them

        • Arturo
          Arturo
          25 June 2012 am30 06:47 |

          I've tried. The patch run !
          But, but resolution is very very bad.
          Labels and icons are unreadables.
          480x234 version is very necessary.
          TOMTOM display "not enough memory" !!!
          I hope for a solution.
          Thanks
          A

          • Petrut
            Petrut
            26 June 2012 am30 07:04 |

            email me please, and request the custom version

  • Diego
    Diego
    22 June 2012 pm30 19:26 |

    Hello, i downloaded the files to know what kind of stereo i have. I would like to send this pictures to you so i know what patch do i have to buy for my stereo.
    i Send you the ebay link of the stereo. please reply since i´m going on a trip soon and i want to have the patch installed. THANKS!!! Diego.- (Argentina)

    http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=170824038276&ssPageName=ADME:L:OC:US:3160

    • Petrut
      Petrut
      23 June 2012 pm30 16:27 |

      post here the results of total commander and resinfo, or email me. Email can be found in about us page

  • Rui
    Rui
    20 June 2012 pm30 22:50 |

    hi,

    I have a Eonon unit for Opel Astra H (Nowada 2450, 800x480,..)
    I want to know if there is an application for (Radio FM player and a bluetooth)? I want to continue listen radio but with different menu/app UI style...
    thanks

    • Petrut
      Petrut
      21 June 2012 am30 11:40 |

      not possible

  • Geir
    Geir
    20 June 2012 pm30 20:25 |

    Hello i bought your WinCE patch for Samsung SMDK 2450. It is only a problem that i cant get it work. I just get some error when i try to install it, what do i do wrong? I have run NC and it is the right patch for my system. StorageCard\wincepatch\install.exe. How do i do to locate the storecard and the right path. Please help me.

    • Petrut
      Petrut
      21 June 2012 am30 11:41 |

      probably you have data files error. read manual, download data files, add them correctly, then try again

      • Geir
        Geir
        01 July 2012 pm31 14:56 |

        Hello petrut ! I have bought your patch and i think i found the solution of the problem. In my GPS is storagecard in one word. Not storage card as in your patch. Is it possible to build a new patch for my system ? My system is :

        SMDK 2450 Board 5.0
        Windows CE 5.0.1400
        102 MB RAM
        ARM920T S3c 2450 400 MHZ
        800x480 pixels 65536 colours



        This was the error i got when i tyyed to install your patch : couldn't create directory\storagecard\programfiles'
        line 36 storage card\wincepatch\install.mscr):
        Mkdir("\storagecard\program Files")

  • outfox
    outfox
    20 June 2012 am30 06:58 |

    Hello,
    I bought a 2-DIN Erisin with my car.
    ResInfo says:
    System: RIZETECH, RT GPS, Windows CE 5.0.1400, 46.3 MB RAM, ARM ARM920, 800x480 pixels, 65536 colors.

    The image of WinCE 5 patch No.5 looks like my menu, but I have no nowada-board, you can tell me the proper patch .. ?
    thx ... Dirk

    • Petrut
      Petrut
      20 June 2012 pm30 18:38 |

      run total commander from tools and tell me partitions names. you need custom patch

      • outfox
        outfox
        21 June 2012 am30 06:15 |

        I work at night, and my daughter needs my car today for their move ...
        The dates will follow as soon as my car is coming.

        • outfox
          outfox
          22 June 2012 pm30 16:51 |

          Hello Petrut,
          The Name of the partitions:
          NandFlash and StorageCard

          • outfox
            outfox
            23 June 2012 pm30 17:33 |

            Hello?
            Do you need more infos...?
            What shall i do now...

  • hugo
    hugo
    20 June 2012 am30 01:23 |

    Hi there Petrut,
    First of all let me congrat you for your amazing work!

    I´m about to buy a Dynavin d99 Wce 6.0 and i would like to access internet trough wifi and to connect to Hotspots and not iphones or whatever, is it possible? i already read that IE is not possible to use as browser so wich is the internet browser to use?
    Thanks in advance

    • Petrut
      Petrut
      20 June 2012 pm30 18:39 |

      of course is possible. also I provide opera browser.

  • annunziata
    annunziata
    19 June 2012 am30 08:49 |

    hello petrum i have unit maisun mt6501 with board mesada 2440 multiplatform 5.0 windows ce 5.01400 15,8mb ram arm920t385mhz resolution is 480x234pixels ,but i have download patch for wince for the nowada 2450 but your instruction are same for the mesada 2440..but i have descharge the second patch nowada 2450 for any devicewith resolution 800x480..i not installed the patch,but this patch is correct for my model if the resolution is different?..and please take me the correct patch for my unit..thanks

    • Petrut
      Petrut
      19 June 2012 pm30 12:21 |

      mesada 2440 is SAME with nowada 2450! correct patch should be item no 7 from wince 5 section. if you bought another, email me to fix in your account.

      • annunziata
        annunziata
        19 June 2012 pm30 13:24 |

        YES ihave download the wrong patch ..my email is nancyzac79@virgilio.it..thanks

        • Petrut
          Petrut
          19 June 2012 pm30 17:24 |

          check account

          • Annunziata
            Annunziata
            19 June 2012 pm30 18:06 |

            Petrum on the my email nancyzac79@virgilio.it not is nothing...resend to me..thanks

            • Petrut
              Petrut
              19 June 2012 pm30 20:47 |

              i said check account, not email...

              • annunziata
                annunziata
                22 June 2012 pm30 15:43 |

                hello petrum..i have download the patch exact..and i have the mod usb ..my units read hard disk the pen drive..it'sall ok but after i install the wincepach and after i path on the navi the folder desktop.exe i look the menu of the iphone mod but the program for mp3 and mp4 video,music player not start...there is an error return..the tcmp.exe read the file but i not listen nothing..I hear only the background of the radio...why?..not listen the mp3 music on the usb drive..

  • Dean
    Dean
    17 June 2012 pm30 13:13 |

    Petrut,

    Have you figured out a solution to my problem of no desktop yet?
    Maybe I need a custom patch. Let me know what you need to build one.

  • Manuel Bieber
    Manuel Bieber
    12 June 2012 pm30 19:17 |

    Dear Petrut,

    If I send a video with my model image you can take me some instruction to conect to internet?
    My problem is that I can write points with the keyboard that opens and I can not configure the network from the control panel.

    Thank you very much and I hope to answer.

    Best Regards

    • Manuel Bieber
      Manuel Bieber
      12 June 2012 pm30 19:19 |

      Dear Petrut,

      If I send a video with my model image you can take me some instruction to conect to internet?
      My problem is that I can´t write points with the keyboard that opens and I can not configure the network from the control panel.

      Thank you very much and I hope to answer.

      Best Regards

      • Petrut
        Petrut
        13 June 2012 pm30 12:23 |

        enter in desktop, then in control panel, then network connection, and add and configure a new connection! cant help you more, sorry.
        don`t use their interface, use wince!!!!

        • Manuel Bieber
          Manuel Bieber
          03 July 2012 am31 00:37 |

          Dear Petrut,

          I enter in desktop, then in control panel, then network connection, and I need add and configure a new connection but I can´t put the phone number because there isn´t a Keyboard to write and configurate the new connection.
          In other places I can open the keyboard but is not possible to add a new connection.

          Can you bring me a solution?

          Thank you very much,

          Manuel Bieber

  • trooper
    trooper
    11 June 2012 pm30 20:03 |

    Hi Petrut,

    I have the following:
    Nowada_2450
    NWD_2450 multi-platform 6.0
    Windows Embedded CE 6.0.3122
    SiRF ARM1136JF-S AT550

    Now, I am interested in several things:
    - Can the audio player from your patch play music on rear speakers as well (the plain WinCE audio plays only on front)?
    - Can I use driving wheel controls (next/previous track, volume up/down) in audio player from your patch?
    - Is there a way to hack/patch the primary board and get access to Bluetooth (the default Bluetooth application is very shitty)?
    - If not, is there a way to add a secondary Bluetooth receiver?

    • Petrut
      Petrut
      12 June 2012 am30 05:15 |

      1.usually NO, but on some cars works.\
      2.no
      3.no way
      4. possible, but no phone support, only file transfer

  • Nelu
    Nelu
    11 June 2012 am30 08:13 |

    Salut Petrut,
    Multumesc in primul rand pentru ajutorul acordat atat de promt, am reusit sa instalez patch-ul,dar mai am o intrebare
    cand intru pe conexiune imi afiseaza 3g wireless modem si inca ceva in chineza pe com1, am facut setarile pe internet
    3g dar am un mesaj la conectare "The port is unvailable, may be use by another application", am incercat si cu celalalt si acelasi rezultat. Ai vreo idee, e posibil sa nu fie modemul compatibil? Acum cand introduc modemul nu im mai cere drivere.

  • Jose Maria
    Jose Maria
    09 June 2012 pm30 19:25 |

    Hello, I have a Chinese browser, exactly the model TR023, sold in www.tradetec.es. I would like to stick a new firmware to change the look and improve it a little, and I am told that your beams and they are very well. Can you explain a little?

    Mesada_2440 multi platform 5.0
    Windows CE 5.0.1400
    40.9 MB RAM
    ARM9207T S3C2440A (385 Mhz)
    800x480 pixels, 65536 colors
    and has a module of DVB-T.

    • Petrut
      Petrut
      10 June 2012 am30 11:08 |

      you cant change anything except the interface in gps mode. Your unit is not fully supported.

      • Jose Maria
        Jose Maria
        10 June 2012 pm30 12:31 |

        That is, could only get the program going in the memory card ... no? And that would have cost, how many would be, and what date?

        • Petrut
          Petrut
          12 June 2012 am30 05:13 |

          only on sd, no desktop, only iphone menu, and only in gps mode. price is the same. buy any patch and request custom, based in partitions list in total commander

  • Manuel Bieber
    Manuel Bieber
    08 June 2012 pm30 19:48 |

    Good afternoon,
    I bought the patch and it works perfectly.
    The only problem I have is that they know how to connect to the Internet.
    With this patch you can do with 3G or wifi modem? How do I do? I have this model:
    http://www.witson.com/en/displayproduct.html?proID=100966779
    The drawback is that when I configure the data connection I open a keyboard that does not allow me to point (.)
    I can not configure it from your patch. You can give me some indication.

    Thank you very much,

    Manuel Bieber

    • Petrut
      Petrut
      09 June 2012 am30 09:08 |

      just plug the modem and configure it from control panel, networks.. Will work

  • Joel Wildbaum
    Joel Wildbaum
    06 June 2012 am30 04:48 |

    Hi petrut.
    I want to know if your patch is compatible with http://www.witson.com/en/displayproduct.html?proID=100929090
    if you need more information dont hesitate to ask.

    Regards

    • Petrut
      Petrut
      06 June 2012 am30 06:42 |

      only custom patch, that means no desktop

      • Joel Wildbaum
        Joel Wildbaum
        07 June 2012 am30 00:42 |

        And how can i buy it.
        What means no desktop? Please explain me.
        I buy yesterday the 3g patch but dont work too. can you help?
        Regards

        • Petrut
          Petrut
          07 June 2012 pm30 13:04 |

          please look at video from first page. Desktop is the interface like in windows. Iphone menu will work. 3g or wifi will not. Send me info requested in tutorials and i`ll send custom patch as replacement for 3g patch

  • Premat Henri
    Premat Henri
    05 June 2012 pm30 18:59 |

    Hello, I have installed your wifi patch and when I plug my wifi dongle DLink DWA-140 wince ask me to "enter the name of the driver for this USB device" what can I do ? Is it correct ?

    Thank for your answer

    Regars

    • Petrut
      Petrut
      06 June 2012 am30 06:42 |

      that model may not be supported, dlink changes chipsets all time. Email me for better support.

  • Manuel Bieber
    Manuel Bieber
    01 June 2012 pm30 17:38 |

    Good afternoon,
    I bought the patch and it works perfectly.
    The only problem I have is that they know how to connect to the Internet.
    With this patch you can do with 3G or wifi modem? How do I do? I have this model:
    http://www.witson.com/en/displayproduct.html?proID=100966779
    The drawback is that when I configure the data connection I open a keyboard that does not allow me to point (.)
    I can not configure it from your patch. You can give me some indication.

    Thank you very much,

    Manuel Bieber

  • Dean
    Dean
    29 May 2012 pm31 17:42 |

    Hi Petrut
    I have an 8 inch, double din unit that is marketed as a Movewell MST776. It has WinCE 6.0 and, after running your tool set, it says it has a Nowada 2450 board with 111MB of ram. It is 800X480 and 65536 colors. The storage card is 7.39 GBs with 3.19 GB used. NWD flash is 7.91 MB with 182 KB used and NAND flash is 37.8 MB with 212 KB used.
    Program memory is 111 MB with 18.0 MB used and storage memory is 264 KB with 68 KB used.
    I can provide you with any additional information that you require. What I want to know is, will the #1 patch listed under WinCE 6 work with my unit?
    I am not interested in WiFi but my main concern is NOT losing any original functionality such as am/fm radio,usb and sd card function and gps dual zone function.
    If I understand correctly, the patch only affects the gps side and not the radio side. If that is the case, all original functions should work, right?
    I'm just afraid of "bricking" my unit and/or losing functions with no way to recover. I don't have the factory firmware and doubt if I could get it.
    Let me know what your thoughts are on this unit with your patch.

    Thanks.

    Dean

    • Petrut
      Petrut
      30 May 2012 am31 07:30 |

      no, all fucntions will be same, only when you press the navigation button will load the new interface
      item 1 from wince 6 should work fine.

  • Stefan52a
    Stefan52a
    29 May 2012 pm31 13:45 |

    Do you wincepatch and wifi patch for:

    I have:
    BSP Version : AIVCE6EVB_Rel1.00.5.02
    AT8X0 6.0
    117 MB Ram
    ARM1136JF-S AT840
    480x234 pixels 65536 colors

    program memory 112MB (15.9 MB used)
    Storage memory 5.01MB (68 KB used)
    GPSData 1004 KB (564 KB used)
    NFlash 20.3MB (7.06 MB used)

    • Stefan52a
      Stefan52a
      29 May 2012 pm31 13:46 |

      Forgot to say it is windows CE 6.0

      • Petrut
        Petrut
        30 May 2012 am31 07:25 |

        wincepatch probably, need custom, send me total commander partitions list
        wifi patch , check if you see a usb drive from total commander

        • Stefan52a
          Stefan52a
          30 May 2012 am31 09:45 |

          Thanks Petrut,

          I will send you an email with some pictures.

          With regards to the wifi patch: Can't see USB drive from TC :(. USB mod: There is no 5 V on pin 9, but there is 5V on (at least 1) other pin. Are there other users with success on other type of boards than nowada?

  • Jose Maria
    Jose Maria
    27 May 2012 am31 03:11 |

    Hello, I have a Chinese browser, exactly the model TR023, sold in www.tradetec.es. I would like to stick a new firmware to change the look and improve it a little, and I am told that your beams and they are very well. Can you explain a little?

    • Petrut
      Petrut
      29 May 2012 am31 09:08 |

      should work.
      send me total commander partitions list, follow tutorials.

      • Jose Maria
        Jose Maria
        08 June 2012 am30 04:48 |

        what a crap system I have ... lol, if it may not improve anything, you're the expert, and thou shalt say, I hit the data have if you take all ...

        Mesada_2440 multi platform 5.0
        Windows CE 5.0.1400
        40.9 MB RAM
        ARM9207T S3C2440A (385 Mhz)
        800x480 pixels, 65536 colors

        • Jose Maria
          Jose Maria
          08 June 2012 am30 07:46 |

          ah ... and has a module of DVB-T, but that does not look where ...

  • Micke
    Micke
    25 May 2012 pm31 21:53 |

    Hi i just bought this wincepatch.
    How can I play music and videos from my usb pen, or from my other SD slot, not the GPS one.

    And also when i press the Main Shell and go into setup to change the startup file to my iGO8 it just shuts down the mainshell and go back into windows before i can change it.

    Please help :)

    • Micke
      Micke
      26 May 2012 am31 08:30 |

      OKay i was able to figgure out the Main Shell thing, i just needed to uncheck start automaticly.

      But still need help with the part to play from USB pen or in the Media SD slot. Also how do i install a GPS software becouse nothing happends when i press the tomtom or garmin etc. Figgure they are not installed.

      Thanks

      • Petrut
        Petrut
        26 May 2012 pm31 17:14 |

        you can play ONLY from gps sd slot ot USB gps port ( if your unit have it, or make usb mod if the board support it). Of course no gps programs are provided, you must install them.

  • GK-Lancer
    GK-Lancer
    25 May 2012 pm31 12:37 |

    Hello,
    Can you please let me know which of your patches are correct for my device. Here are the details :
    Nowada_2450
    NWD_2450 Multiplatform 5.0
    Windows CE 5.0.1400
    Memory: 122 MB RAM
    Screen: 800x480
    BINFS 53.3 MB (0 free)
    FATFlash 1.35 MB (1.35 free)
    NWDFlash 8.09MB (7.27MB free)
    NandFlash 54.5MB (54.5MB free)

    Thanks

    • Petrut
      Petrut
      25 May 2012 pm31 16:33 |

      item 1 from wince 6 section

      • GK-Lancer
        GK-Lancer
        27 May 2012 pm31 12:53 |

        So it will upgrade my system to WinCE 6 ? Just confirming before I hit the Buy button.. I was assuming I will have to pick one from the Wince 5 section..

        • Petrut
          Petrut
          29 May 2012 am31 09:09 |

          my bad, wince 5 section, item 1 :)

          • GK-Lancer
            GK-Lancer
            11 June 2012 am30 10:33 |

            How about my Preset buttons on the device like Navi, DVD, Mute etc. Will they still work or can be assigned to specific apps/actions? Will my steering wheel controls like 'Mode' that rotates Radio> DVD> SD> Aux still work?

  • Mariana
    25 May 2012 am31 01:24 |
  • Daniel
    Daniel
    23 May 2012 am31 10:44 |

    salut te rog da si mie o metoda de contact ca vreau sa cumpar patchurile.vreau sa iau o nav tti cu wince 6 si sa o fac calumea se poate?astept un replay sau un add pe astancaidean@yahoo.com, multumesc

  • TrOjAn
    TrOjAn
    22 May 2012 pm31 16:06 |

    Ok this SHOULD be my last question.. I have read through all the threads I can find and it seems that once your patch is installed all will work BUT.. not at the same time?

    For example I have a USB lead for my MP3 music and another USB lead for the wireless 3g connection.. it seems that I wont have access to both at the same time?

    Im hoping I have mis-read that but please confirm then its off to flash I go.

    TrOjAn

  • Premat Henri
    Premat Henri
    21 May 2012 pm31 20:56 |

    Hello, I would like to know if this unit run with your patch ? http://www.autoradios-gps.com/autoradio-audi-autoradios-gps-dvd-audi/28-autoradio-audi-a3.html
    I have try to run the ResInfo.exe but the screen disappear behind the gps menu..after that i run CECMD and i start the ResInfo.exe My settings are Nowada 2450 - Windows Embedded CE 6.0 - 111MB Ram - ARM1136JF-S AT840 - 800 x 480 The storage screen of ResInfo.exe show to me NWDFlash 1.98MB and NandFlash 63.1 MB is enough for your patch ? and witch patch can I use ? wifi patch will work on it ? many thank for your answer!

    • Petrut
      Petrut
      24 May 2012 pm31 16:20 |

      you need usb mod.
      and all patches you need will work.

  • samiceng
    samiceng
    19 May 2012 pm31 16:21 |

    hi Petrut
    i download your patch but till now i didn't use it
    since my GPS board not fixed yet
    i won't to reflash my N117 board
    in the readme file i find the part talking about the reflashing
    my quastion is does the reflash files that mention in the readme file included with the zip folder with the patch?
    if yes what is name (is it the upgrade)
    if no from where i can get the reflash files
    of course thank you

    • Petrut
      Petrut
      20 May 2012 pm31 17:47 |

      firmware files are not provided since are dangerous.
      Tell me your gps problem, how it happened, what board, what unit, and maybe i have right files to recover.

  • marcel
    marcel
    18 May 2012 pm31 20:23 |

    petrut best. I have a wince 6 purchased at u. this I install and works well. only I can not boot the desktop where the system tool in State. can you perhaps help me. marcel.

    • Petrut
      Petrut
      20 May 2012 pm31 17:45 |

      don`t really understand issue, can you send a picture or video ? Or just explain better :)

  • John G
    John G
    18 May 2012 pm31 17:18 |

    Good Day Petrut,
    Your custom CE6 patch has been working very well and I'm just waiting for the arrival of the 7711 wifi dongle to see if internet access will work.

    My question has to do with factory original R.A.P.(Retained Accessory Power)which is basically any accessory connected to this will remain on for approx. 10 minutes or until 1 of the vehicle doors is opened (Ford) which ever comes first will shut down those accessories tied into this system.

    It appears that in my case the shutting off of those RAP accessories is controlled through MS-CanBus.

    The problem is my new GPS/Nav/Multimedia that replaced the OEM radio does not send the signal to MS Can to keep it on for 10 minutes (or when a door is opened) after shutting off the vehicle ignition.

    Is there a way to configure my CE6 custom patch to trigger the factory MS Can so that it regonizes this new device (GPS/Nav)as it does with the OEM radio that it replaced?

    Thank you Pet!

    • Petrut
      Petrut
      20 May 2012 pm31 17:47 |

      no, sorry, not possible.

  • TrOjAn
    TrOjAn
    17 May 2012 pm31 18:43 |

    Hi Petrut,

    Can you clear up the following questions please.

    I have this>> http://bit.ly/Kwuunf unit and Im having issues with the WinCE as I think I messed the settings.. anyway, If I flash your patch will

    1) I still be able to access BOTH onboard SDcards
    2) Can I access my MP3 music on my USB drive
    3) Use the USB Modem / WiFi lead to go on the internet
    4) Will my Bluetoth STILL work / steering wheel controls

    Thanks for any answers you can give but if this messes up then I have to return the unit to China which I dont want to do.

    Cheers, TrOjAn

    • TrOjAn
      TrOjAn
      18 May 2012 pm31 13:59 |

      Also, rear view camera? will that still work?

      • Petrut
        Petrut
        20 May 2012 pm31 17:50 |

        yes to all your questions.
        The patch is a new interface in the wince mode ( that the unit already use it for internet access), and will unlock the full power of the board, for better players, stability, gps tracking, etc

  • Tony
    Tony
    17 May 2012 pm31 17:58 |

    Hi,
    I have a Dynavin V5, i have 2 questions:
    1, My Dynavin has WinCE 5 on it, can i put WinCE 6 on it?
    2, Is it possible to get the bluetooth working under the Patched WinCE side of the Dynavin so you can connect it to an iphone 4s for google tmc etc?
    Thanks in advance
    Tony

    • Petrut
      Petrut
      20 May 2012 pm31 17:51 |

      NO to all.
      Get wifi or 3g patch for online tmc.

  • marcel
    marcel
    17 May 2012 pm31 17:06 |

    I have downloaded this patch and like mike I can't install
    the patch -getting message "Data files missing "...etc ...but the install instructions are wrong
    They say "COPY the Program Files folder from the extracted data800x480 folder to WINCEPATCH folder ( this way you`ll add the programs ) then copy the entire new wincepatch folder in the root of your GPS SD card"
    but the program files folder is already in the wincepatch folder so maybe it's something to do with that!
    so please can you give me some help on this as I can't install. Thankyou

  • Frank
    Frank
    17 May 2012 am31 10:48 |

    Hi,
    I installed everything as told in the readme. Now I have this problem:

    Every time I start pushing the navi button in the basic menue it says syntax error in a small window. Then I have to click OK (very difficult) and then the iphone screen appears.

    How can I solve that?
    How do I know if software 8.1 or 8.3 is installed?

    Thanks

    • Petrut
      Petrut
      20 May 2012 pm31 17:44 |

      email me please.
      make picture.
      on sever are always latest versions :)

  • GammaSoul
    GammaSoul
    16 May 2012 am31 08:42 |

    I want to buy a Dynavin DVN-E46-D99 purely because of the possibility of unlocking its true potential with your patch.

    Can you tell me if it will be possible to use a USB hard drive full of content with this after patching with your software?

    If not a USB hard drive what about a wifi hard drive?

    Also if i get the Dynavin DTV module will this still work after your patch?

    Also do you know how many usb devices i could run after patching?
    I think the dynavin unit has 2 usb connections (im not sure if these are already used for other things) could i use a usb hub to extend it?

    Thank you

    • Petrut
      Petrut
      16 May 2012 pm31 12:45 |

      you need to get wince version of dynavin :)
      a hdd will work fine as long as you have external power for it
      also a hub will work ok, with wifi/3g and storage device.
      All functions will remain the same, dtv, radio, etc, only wince side will be unlocked and look like a pc.

      • GammaSoul
        GammaSoul
        17 May 2012 pm31 22:40 |

        Thanks Petrut
        I cant wait to do this now.

        Thanks for coding this patch!!!! :)

  • alexandre087
    alexandre087
    10 May 2012 pm31 21:49 |

    I've just installed wincepatch.
    My unit is Winca GTCE 8986, and i get the same error as eyeonu
    on 27 March 2012 pm31 12:19

    http://imageshack.us/photo/my-images/23/img1604ih.jpg/

    Do you know how to solve it ?

    • Petrut
      Petrut
      14 May 2012 pm31 17:00 |

      system reflash only

  • Manuel Bieber
    Manuel Bieber
    08 May 2012 pm31 20:02 |

    then you tell me to buy the product and I will be able to connect to internet with 3G modem or wifi.

    • Petrut
      Petrut
      10 May 2012 am31 10:57 |

      yes, you can

  • Manuel Bieber
    Manuel Bieber
    07 May 2012 pm31 20:12 |

    Please tell me if this model http://www.witson.com/en/displayproduct.html?proID=100966779
    support your patch to buy them

    Thank you very much!!

    • Petrut
      Petrut
      08 May 2012 pm31 18:02 |

      yes, and will help your issue
      item 1 from wince 6 section

  • Manuel Bieber
    Manuel Bieber
    07 May 2012 pm31 18:26 |

    Good afternoon,

    I bought this Double Din: http://www.witson.com/en/displayproduct.html?proID=100966779

    Supports 3G modem but when I put the APN configuration I can´t put points (.)with the keyboard that unfolds to me.

    The supplier told me I should buy a huawei e1550 that connects automatically. I bought it but I can not connect.

    You know how I configure it or how to solve this problem?

    regards

  • Jason
    07 May 2012 am31 01:18 |

    I sent you two emails reguarding the file I purchased from your site.
    Have you receieved them?

  • TrOjAn
    TrOjAn
    04 May 2012 am31 10:03 |

    Hi, I have just purchased the WinCE patch, I dont intend on using it as I only wanted the iphone software for my unit :)

    I am using a unit made by A-Sure which has USB wifi, USB socket for Music etc, an SDCard for movies PLUS an SDCard for navigation... it also has working Bluetooth.

    Reading through the posts / forums it seems that if I flash this patch I will LOSE Bluetooth AND the 2nd SDCard, is this correct?

    Thanks, TrOjAn

  • cmaceeepc
    cmaceeepc
    04 May 2012 am31 09:05 |

    Hi I have an old uniden maptrax 430 and was wondering if any of you patches will work on it

    • Petrut
      Petrut
      04 May 2012 pm31 17:59 |

      no

  • Wayne
    Wayne
    03 May 2012 am31 09:52 |

    Hi, I bought the WinCE 6 patch for Nowada 2450 boards, unfortunately I am unable to install the patch due to miopocket install destroying the GPS side of things.I have a Qualir double din unit http://www.autodvdgps.com/7-inch-digital-hd-touch-screen-dvd-player-with-indash-gps-navigation-for-opel-astra-antara-corsa-zafira-gray-silver-black-p-619.htmlI'm stuck on the GPS start screen with a scolling bar, everything else still works bar the GPS.Can you please help me? I'm desperate. :(

    • Petrut
      Petrut
      04 May 2012 pm31 17:56 |

      send to my email a request for firmware and a copy of your purchase

  • aotta
    aotta
    29 April 2012 pm30 22:04 |

    yesterday i tried your patch on my nowada 2450 board, it installed with no error but after rebooting it didn't work. i've tried to update the patch, with no luck, and finally i put the "update" folder in the sd card and powered off and on, but it seemed nothing appened.

    And now.....
    wince don't detect my sd card anymore!!! in setup it only show the flash (with only an empty windows folder!!)
    Can i do something to repair?
    Thank you!

    • Petrut
      Petrut
      30 April 2012 pm30 17:16 |

      email me all unit details, photos, error messages, etc

      • aotta
        aotta
        30 April 2012 pm30 22:18 |

        Thank you, but i think it may be an hardware issue, because i noticed that has stopped working the sd in the radio section too...peraphs i damaged one of the flex cable while soldering the usb cable.
        anyway, i've just ordered a new dynavin d95 ones: can i use the patch i've already downloaded, and buy only the wifi patch for the new one?

  • Peter
    Peter
    27 April 2012 pm30 13:07 |

    Will this patch solve the 'jumping clock' and 'jumping location' problems in Tomtom Navigator?

    An example youtube movie of the 'jumping location' problem can be found here: http://tinyurl.com/cw96wml

    The 'jumping clock' problem is probaby related; the clock just jumps randomly every second or so.

    My unit is an Erisin ES-828D (1-Din, 7", WINCE5.0)

    RIZETECH
    RT GPS
    WINDOWS CE 5.0.1400
    46.3 MB RAM
    ARM ARM920
    800x480 pixels, 65536 colors
    ----------------------------
    NandFlash 31.9MB
    22.6 MB used 9.29 MB free
    ----------------------------
    DSK1 Microsoft flash disk
    PART00 *

    • Petrut
      Petrut
      29 April 2012 am30 07:58 |

      no will not fix it.

  • Kai
    Kai
    20 April 2012 am30 11:23 |

    Hello,

    my GPS Board is:
    ALLWISEA5
    AT10X0A 6.0
    Windows Embedded CE 6.0.3122
    ARM 1136JF-S AT560
    800x480

    I think it is an Erisin ES996 but there is no lable on the unit.
    Whith path will fit?

    • Petrut
      Petrut
      20 April 2012 am30 11:31 |

      run total commander and itaskmanager and tell me the results.

      • dyLAN
        dyLAN
        05 August 2012 pm31 12:36 |

        Petrut,

        i have same board as Kai and also interested in what patch to load. I can run both apps, what results are you looking for ?

        Thanks

  • stilock
    stilock
    19 April 2012 am30 10:31 |

    v8.3 - added on 26.08.2011 / wince 6 only

    Obd ELM 327 cable connect ?


    - *** added FTDI driver support ( thanks to Haltronics for help ) and a working OBD software ( need .netcf 3.5 ). This will allow you to connect a usb TMC to the unit and use it in iGo, and to connect a usb OBD cable to diagnose the car !
    - improved startup time
    - added a new, bigger and nicer keyboard
    - upgrade enabled, read instructions.

    • Petrut
      Petrut
      20 April 2012 am30 11:34 |

      i dont offer support for connecting obd devices.
      i provided the generic drivers, you must enable them, are disabled by default. I have many customers that made it work, but dont ask me what cable hardware they used...

  • Hangart
    Hangart
    06 April 2012 pm30 20:35 |

    Hi, I have a chinese GPS car DVD player, with Resinfo I got the following infos:

    MESADA_2440 Multiplatform 5.0.1400 40,8 MB ram ARM920T S3C2440A (385MHZ) 320X240 pixels 65536 colors.
    NwdFlash: 16MB (7,99 Used).

    Which patch would you suggest, please? Do you think it is possible with your patch to drive the DVD player from Win CE?
    Many thanks for your support, best regards,

    • Petrut
      Petrut
      07 April 2012 pm30 18:51 |

      item no 7 from wince 5 section should work. if doesnt, i`ll build a custom one.

      • Hangart
        Hangart
        07 April 2012 pm30 20:35 |

        Many thanks Petrut, I forgot to ask you if it is possible to switch to wince 6 also.
        Thanks

  • stilock
    stilock
    06 April 2012 pm30 13:52 |

    Hello,Petrut

    Is there any risk?

    • petrutms
      petrutms
      07 April 2012 pm30 18:52 |

      NO

  • Ahmed Hamouda
    Ahmed Hamouda
    05 April 2012 pm30 12:56 |

    Petrut i need your help, i bought the patch for my device MT6501 wince 5 and it works good, but my device is not working right now and i failed to fix it, even the retailer failed, and i am intending to buy MT8001 wince 6 so is there is any way to replace the patch?

    • Petrut
      Petrut
      06 April 2012 am30 07:23 |

      no, sorry, eventually i`ll give you a 30% discount :)
      contact me when you have the new unit.

  • Peter59
    Peter59
    05 April 2012 am30 08:43 |

    Hi, I'm wondering if the tethering can work using the USB cable, instead of using the wifi tethering, on Android and iOS devices when you plug the phone via USB the tethering is actived right away and recognised by the PC as a USB modem interface !!
    will it work "out of the box" with your patch ?

    thanks

    • Petrut
      Petrut
      06 April 2012 am30 07:25 |

      no will not work. wince is not windows xp, 7, etc.
      You need 3g patch and i`m not sure will work with that either, i never tested, not much interest for cable tethering.

  • Deepspb
    Deepspb
    04 April 2012 am30 10:21 |

    Hi again, Petrut!
    Can I get access to the second SD-slot(Media SD) from WinCE on my Dynavin MBC D99 ?

    • Petrut
      Petrut
      06 April 2012 am30 07:26 |

      NO

  • rrg
    rrg
    03 April 2012 pm30 22:12 |

    Hello,

    FYI - I am working on the Flyaudio GUI customization over at the Prius chat but more interestingly your patch works with the Ottonavi on the prius site. Search Ottonavi HU: How to customize (a bit) the UI.

    Also I would be interested to try your patch on my Flyaudio and recommend it, if it works. Search my thread at Flyaudio HU: How to customize the UI - 7572. PM me if interested.

    • Petrut
      Petrut
      04 April 2012 pm30 17:00 |

      hi, i saw your posts on forums.
      I`m happy that it works, i could add it to the compatibility list:)
      And i think my patch is the best of all unlock solutions, because is SAFE and works out of the box, no need to tweak, etc. And i offer full support, custom versions, etc.
      For flyaudio i made some time ago a custom patch and worked fine, but NO desktop and no wifi, 3g, etc, because their usb port is not connected to wince side.

  • erick cheek
    erick cheek
    03 April 2012 pm30 18:12 |

    Hi Petrut, Thanks again for the help you have provided. Are you aware of a way to teher via USB rather than WiFi? Thanks.

    • Petrut
      Petrut
      03 April 2012 pm30 20:03 |

      possible with 3g patch and some older phones, like sony ericsson A platform, old nokias, no smartphones.

  • Deepspb
    Deepspb
    02 April 2012 am30 07:21 |

    Hi! I have Dynavin DVN-MBC D99 Platform on wince 6.0. Is it possible to install android instead of wince ?

    • Petrut
      Petrut
      02 April 2012 am30 08:00 |

      if you buy an android unit, yes:)
      so of course NOT possible

      • Deepspb
        Deepspb
        02 April 2012 am30 08:10 |

        Too bad. Thanks for the quick reply

  • Murat
    Murat
    31 March 2012 pm31 18:42 |

    Hey I found the wifi files did a clean reinstall of the wincepatch then the wifipatch.
    But it still gives a error:

    Unidentified USB Device
    Enter the name of the driver for this USB device.

    Don't know what to enter no matter what I write it gives error installing USB driver please help me Petrut

    Could the wifi adapter be faulty? It's edimax ew-7711umn that am using

    • Petrut
      Petrut
      31 March 2012 pm31 20:04 |

      if it worked, there is absolutely no reason not work again.
      If you have the firmware for your unit, please reflash it first, then wincepatch (latest version form your account) then wifi patch.

  • Elio
    Elio
    27 March 2012 pm31 16:57 |

    Hello Petrut acquired the patch 2440 Multi Platform 5.0 allowance
    Windows CE 5.0 1400
    45.7 mb ram
    ARM920T S3C2440A 385 MHZ
    480x234 pixels 65536 colors.
    Which I could not install, it tells me there is preparing to charge, eh waited for several hours and nothing, it may be, it is lowered twice thinking that had been loaded wrong and nothing help please

    • Petrut
      Petrut
      27 March 2012 pm31 18:32 |

      probably wrong patch for wrong unit.
      what unit you have? send total commander partitions list

      • Elio
        Elio
        29 March 2012 am31 02:02 |

        Hello Petrut my unit is a 8830 tv dvd napoli windows ce 5.0 gps
        storagecard 3.68 GB
        NandFlash 45.8 MB
        NwdFlash 30.1 MB

        • Petrut
          Petrut
          31 March 2012 pm31 20:03 |

          should work fine then

          • Elio
            Elio
            01 April 2012 am30 04:19 |

            Petrut hello I can not install wince, get this notice.
            Data files missing.Please read the readme. doc for more instructions !.Press ok to exit !
            who is this! what is wrong.

            • Petrut
              Petrut
              02 April 2012 am30 08:00 |

              read the manual please !

  • eyeonu
    eyeonu
    27 March 2012 pm31 12:19 |

    i have this error,
    when i enter on wince i have this error and i don't know why
    http://imageshack.us/photo/my-images/23/img1604ih.jpg/
    and some china language
    http://imageshack.us/photo/my-images/42/img1605s.jpg/
    and when i want to run taskmanager i receive this china error
    http://imageshack.us/photo/my-images/716/img1606zd.jpg/

    • Petrut
      Petrut
      27 March 2012 pm31 18:31 |

      what unit?

  • KS
    KS
    26 March 2012 am31 10:29 |

    You wrote about version 8.3 "This will allow you to connect a usb TMC to the unit and use it in iGo, and to connect a usb OBD cable to diagnose the car. Which Usb TMC device and usb OBD cable do you suggest and where can I buy it.

    • Petrut
      Petrut
      27 March 2012 pm31 18:30 |

      i dont know, i just provide drivers in the patch.

  • eyeonu
    eyeonu
    25 March 2012 am31 00:55 |

    i bought today the wincepath, and i need to know what cable i need to buy to connect my seat leon with odb to the navigation ? i have an odb with usb that i am using on my laptop did this cable will cork ? or i need to buy in obd with bluetooth ?

    • Petrut
      Petrut
      25 March 2012 pm31 15:51 |

      it should work.
      sorry i can`t give more info, i just added drivers support.

      • eyeonu
        eyeonu
        25 March 2012 pm31 17:09 |

        thanks for reply petrut, but i need to know the simple way to work, with the device Elm327 bluetooth it should work with your drivers ? and where i cand find the link with the driver ?

        • Petrut
          Petrut
          27 March 2012 pm31 18:29 |

          no, bluetooth will not work.

  • mike
    mike
    23 March 2012 pm31 18:28 |

    Hi,
    I can`t instal the patch. I get this message "Data files missing. Please read the readme.doc for more instructions ! Press ok to exit !","Read the readme !!!")
    What is the mistake?

    • mick
      mick
      24 March 2012 pm31 13:30 |

      I have downloaded this patch and like mike I can't install
      the patch -getting message "Data files missing "...etc ...but the install instructions are wrong
      They say "COPY the Program Files folder from the extracted data800x480 folder to WINCEPATCH folder ( this way you`ll add the programs ) then copy the entire new wincepatch folder in the root of your GPS SD card"
      but the program files folder is already in the wincepatch folder so maybe it's something to do with that!
      so please can you give me some help on this as I can't install. Thankyou

    • mike
      mike
      24 March 2012 pm31 13:23 |

      Done!!!

      • marcel
        marcel
        17 May 2012 pm31 16:05 |

        i have the same problem as mick
        I have downloaded this patch and like mike I can't install
        the patch -getting message "Data files missing

  • Murat
    Murat
    22 March 2012 pm31 19:52 |

    Hey Petrut
    I have buyed the wince patch and wifi patch maybe a little over
    A year ago. For the last 3 month I used a different micro sd card. Now when I use the
    Sd card with the wince patch and wifi patch on it I get a error with my edimax 7711 wifi dongle
    Its saying error installing my wifi dongle every time I open the patch on the dynavin i have unplugged it many times but still no luck. Opera mini is working everything is working the only issue I have is that it want me to write the name of wifi adapter and when I do its saying error installing the wifi adapter. I had it working for 3 months ago but now I can't use the wifi patch because of this error. Please help me

    I have a little over 400mb free space on the sd card. I really can't get to work hope you help me

    It's with wince 5.0 and it's dynavin navigation I have

    Wifi adapter is edimax 7711 that am using. I had it working before so there must be something wrong

    Please help me thanks

    • Petrut
      Petrut
      23 March 2012 pm31 12:34 |

      did you try a complete reinstall on this sd? delete program files from it, and reinstall wincepatch, then wifi patch.

  • Frenkel
    Frenkel
    21 March 2012 pm31 20:31 |

    Hi,

    Looks nice your patch. However, do I understand correctly that bluetooth car kit functionallity is not supported?

    • Petrut
      Petrut
      25 March 2012 pm31 15:52 |

      yes, not supported.

      • Frenkel
        Frenkel
        26 March 2012 pm31 18:43 |

        Ok, so the patch has no bluetooth support. However, the new patch is called from the navigation program link. Won´t the original functions like radio and carkit remain, so that I am still able to receive incomming calls through my carkit?
        I have a CY7088, nowada 2450 board wince 6.0.

  • Faooq
    Faooq
    21 March 2012 pm31 13:38 |

    Hi should i use this patch on following system :

    Info taken with WR-Tools Resinfo

    BSP Version: AIVCE6EVB_Rel 1.00.0.08
    AT8X0 6.0
    Windows Embedded CE 6.0
    115 MB Ram
    ARM1136JF-S AT840
    800X480 pixels, 65536 colors


    Thanks

    • Petrut
      Petrut
      21 March 2012 pm31 16:59 |

      you probably need a custom patch. run total commander and tell me partitions names

      • Farooq
        Farooq
        21 March 2012 pm31 18:03 |

        Well i already send the e-mail with attached images of various information that u may required to know, about my system.

        Thanks

      • Farooq
        Farooq
        21 March 2012 pm31 17:51 |

        Hi, i have taken snap shots so, can u provide me ur e-mail id so i will attach all of them for further references.

        Thanking you

      • Faooq
        Faooq
        21 March 2012 pm31 17:31 |

        Thanks for the reply,
        let me check then will back

  • Kaza85
    Kaza85
    21 March 2012 am31 09:58 |

    Hi there i tried one of your patches for wince 6.0 and there's an error has poped up at the installation process that the patch couldnt create program files folder in my sd card. i took a snapshot for the error message and another one for my navi system

    snapshot for my navigation system

    http://i463.photobucket.com/albums/qq355/majood_me/photo2.jpg

    snapshot for the error message

    http://i463.photobucket.com/albums/qq355/majood_me/photo1.jpg

    anyone got the idea to solve this problem

    my system brand is Roadrover for ford

    • Petrut
      Petrut
      21 March 2012 pm31 17:00 |

      all roadrover units need custom patch
      email me the partitions list from total commander

  • David Gonzalez
    20 March 2012 am31 00:58 |

    Hi,

    I buy a camper with a car dvd player 1 din 7 inch with gps.
    I buy today your patch, but I have a very bad problem. My touch screen works fine in radio, dvd, etc. but when I put gps mode the touch screen doesn't work and my device is a car dvd player without keyboard!!!

    I read some days ago this forum
    http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=123171&whichpage=6
    and I put "AutoUpdate_Eng_Untouched.zip" to reflash my wince, it's horrible!!! Wince 5.0 update well but the touch screen doesn't work in gps.

    I read a lot of hours in internet and at final I found your web and people talk very well of your patches. I buy your patch and I read your blog about to reflash wince 5.0, You talk about this link http://www.mediafire.com/?mwzotnttyzy and I download "winceenglish480x234.zip". I put in my sd card, I switch on my device and the device update well but the touch screen doesn't work. I don't know what to do, can you help me? How can I install your patch? I need touch screen in wince 5.0. I thank you very much if you can help me.

    My device is
    SCREEN: 400MHZ
    CHIP: SAMSUNG S3C2440A-40
    ARMV4I
    WINCE5.0 CORE
    64 MB EMS MEMORY
    7 INCH TOUCH SCREEN

    Thanks again.

    Regards,
    David Gonzalez

  • Bullet1222
    Bullet1222
    19 March 2012 am31 06:38 |

    Hi Petrut!

    1. I have your wince patch and wifi patch. All is working besides I can’t use Internet Explorer. Opera is working good. IE does not load web pages, always gives white screen. I have tried to reinstall your patches and play with IE settings but it gives no result. What could be wrong?

    2. Is it possible with wifi patch to save wifi settings and can it somehow show which networks are locked and which are free?

    My unit is Dynavin V3G.

    • Petrut
      Petrut
      20 March 2012 am31 05:49 |

      on wince 5 is not possible to save wifi settings.
      also internet explorer is not working on dynavin, i have no idea why, anyway is so bad that doesnt worth the trouble.

  • Nick
    Nick
    19 March 2012 am31 00:40 |

    Sorry - I thought the flash was for all-chinese - I just reread the flash instructions and flashed the V5 and all is well - look forward to the WiFi Patch.

    Nick

  • Nick
    Nick
    19 March 2012 am31 00:13 |

    Hi Petrut,

    Great site and great job on the patches. Just bought the nwd2450_CE5_800x480_dynavin patch for my V5. Followed instructions and everything worked great - except many of my menus appear to be in chinease. I want to buy the WiFi patch but want to get this issue addressed first - thoughts?

    Thnaks in advance,

    Nick

  • Alain
    Alain
    18 March 2012 pm31 19:10 |

    Hi Petrut! I need your help!

    I have a unit for my car Mazda CX-7. I installed Miopocket 4.0 and now the navi function not work. I can't run the resinfo on my unit so i don't know, what kind of unit I have, but I have another original multimedia unit for Volkswagen car type what is from the same manufacturer, same gps menu, same functions, pics... I can run resinfo on this other VW unit and I read:

    Nowada_2450
    NWD_2450 mulrimedia platform 6.0
    Windows Embedded CE 6.0
    111 MB RAM
    ARM1136JF-S AT840
    800x480 pixels, 65536 colors

    I haven't got the original firmware for my Mazda unit, but I think the other firmware of the VW unit can works on my multimedia too. Do you think?

    Or what is your idea, how can I repair my unit? If I buy your patch, it will work?

    Thanks

    • Petrut
      Petrut
      20 March 2012 am31 05:47 |

      don`t reflash firmware from other units. Touchscreen drivers are different, and touch will not work. send me complete details about unit, i have many firmwares, of course you need to buy the patch.

      • Vinicius
        Vinicius
        20 March 2012 pm31 13:12 |

        Hi, i have the WINCA for Chevrolet cruze
        http://www.wincalcd.com/en/products_view.php?id=133

        I'm looking for his firmware, do you have it?

        Thanks!

        • Petrut
          Petrut
          21 March 2012 am31 06:56 |

          yes i have. Buy wince 6 patch and i`ll send you the firmware you need, then you install my patch.

  • Mark Andersen
    Mark Andersen
    15 March 2012 pm31 16:44 |

    Hi

    Really nice mod you have made for the Wince.

    I will soon order a Dynavin for my BMW E46.

    Do you know if its possible to listen to music and use the navigation at the same time with your mod?

    When i press the Navi button on the Dynavin, can i then get direct to Igo Primo with your mod installed?

    It is possible to easily get back to Dynavin factory Wince?

    • Petrut
      Petrut
      15 March 2012 pm31 18:18 |

      yes to all your questions. When you press navi button you`ll have access to my patch, iphone interface, etc, you can multitask applications, connect to internet, etc

      • Mark Andersen
        Mark Andersen
        16 March 2012 am31 08:08 |

        Thanks for the fast answer :)

  • John Hunter
    John Hunter
    14 March 2012 pm31 14:09 |

    I used your program to determine which software i needed. I am a bit unsure that mine is supported.

    For the model it says PLATFORM_OEM
    PLATFORM_TYPE 6.0
    Windows embedded CE 6.0
    179 MB RAM
    ARM11 TCC89x/91x/92x
    800X480 pixels

    Will any of your programs work for me? Or are they in your future?
    Thanks!
    John

    Oh, here is the model i bought
    http://www.autodvdgps.com/2-din-car-dvd-player-with-695-inch-hd-touch-screen-gps-navigation-3g-wifi-internet-and-bt-rds-atsc-usb-sd-p-2791.html
    It's this model. http://www.autodvdgps.com/2-din-car-dvd-player-with-695-inch-hd-touch-screen-gps-navigation-3g-wifi-internet-and-bt-rds-atsc-usb-sd-p-2791.html

    • Petrut
      Petrut
      15 March 2012 pm31 13:12 |

      not compatible

  • cho
    cho
    14 March 2012 pm31 13:34 |

    For those that downloaded v8.3 patch and with supported gps
    Did gapi speed up igo?
    big difference?

  • Elio
    Elio
    14 March 2012 pm31 13:24 |

    Hi would like to know to unlock patch buy my wince 5.0, my processor is a Samsung ARM920T - S3C2440A

    • Elio
      Elio
      20 March 2012 pm31 18:58 |

      Hello Petrut acquired CE 5.0 Platform allowance 2440 480x 234 pixels, when it begins to charge me says preparing to install? nose that happens is to reset the unit ... help please

    • Petrut
      Petrut
      15 March 2012 pm31 13:14 |

      send board details like in tutorials

      • Elio
        Elio
        22 March 2012 am31 00:01 |

        Hello Petrut acquired CE 5.0 Platform allowance 2440 480x 234 pixels, when it begins to charge me says preparing to install? nose that happens is to reset the unit ... help please

  • mike
    mike
    13 March 2012 am31 09:21 |

    I have a TID-8903 Ford with wolfsat 3g software. Can i use the ce6 hack for oppening the ce desktop?

    • Petrut
      Petrut
      13 March 2012 pm31 18:36 |

      i think so

  • Mike Henning
    Mike Henning
    12 March 2012 pm31 21:49 |

    please tell ús what we need to buy and do to have obd on dynavin d99 wince 6 bmw 320 i e 46- and what to buy for tcm usb support and how to get live traffic at igo primo thanks mike

    • Petrut
      Petrut
      13 March 2012 pm31 18:39 |

      i have no idea. I have users that reported that obd works fine. You need some usb obd2 cable and patience to make it work with my drivers and software. I can`t help more, i just included support for them. For live tmc, use igo primo with a tmc license and a sys.txt entry, you can find it somehwere in the comments, search for it.

  • erick cheek
    erick cheek
    10 March 2012 pm31 15:51 |

    Hi, I have the D-link DWA 140 wifi dongle. Almost every time I use it, it does not load up anything for wifi on bootup. If i take the dash apart and unplug, plug in the adapter then it pops up the window for choosing a wifi connection and everything works fine. Do you know how I can fix this? Thanks again.

    • Petrut
      Petrut
      11 March 2012 pm31 18:26 |

      what unit you have? what wincepatch version? send details by email

  • rrg
    rrg
    10 March 2012 am31 01:27 |

    I have the Prius Flyaudio E7572 will it work?
    I ran the ResInfo tool and couldn't see the 3 screens. Only the Memory/storage/task worked.

    I could not get the System one to run or show up.

    • Petrut
      Petrut
      11 March 2012 pm31 19:01 |

      not compatible at all with flyaudio

  • Adeela
    Adeela
    09 March 2012 pm31 21:08 |

    Hi, just got the patch for wince 6 and need the english file to reflash the system.I have the Dynavin radio unit. I also have installed HOBD and have a usb obdII adapter ive connected into thew Dynavin USB board but some dialog box comes up in chinese asking me to do something and the obdII contoller wont load!

    • Adeela
      Adeela
      10 March 2012 pm31 21:22 |

      Any chance of that reflash english file pleeeaasssee!!!!!

      • Petrut
        Petrut
        11 March 2012 pm31 19:03 |

        wince 6 reflash for dynavin is too risky , i will not provide files. My patch is enough, will transform 99% of menus in english.

  • radoslav
    radoslav
    09 March 2012 pm31 20:20 |

    I want to change the letters in eurokeyboard
    How can I play it in emulator WinCe?
    Is there any explanation what column?

    How can I add something in the records permanently?

  • Imran
    Imran
    08 March 2012 pm31 13:34 |

    I have this exact same problem of GPS getting stuck as shown in this video : http://www.youtube.com/watch?v=aHuhUMyMk_U

    I have this device: goo.gl/ghyYp

    Will your patch work on my device?

    Thanks.

    • Petrut
      Petrut
      08 March 2012 pm31 17:35 |

      yes, can be fixed. buy my patch and i`ll send you the reflash info.

      • Imran
        Imran
        08 March 2012 pm31 18:50 |

        Bought the patch, can you send me the reflash pls. Email id is same used in paypal payment.

        • Imran
          Imran
          09 March 2012 am31 06:17 |

          When will you send me the Flash ? Pls, i am waiting.

  • terry
    terry
    07 March 2012 pm31 23:39 |

    can you do the enco b146?

  • MeDroid
    MeDroid
    07 March 2012 pm31 16:09 |

    Hiho,
    I'm a very proud owner of a Erisin ES778 (ES777 with DVBT). My understanding is that the headunit is on WinCe, while the PAD has Android. I love the combination, but to get the most power out of it, I'd like to unlock WinCe.

    http://www.erisin.com/erisin-es778a-hd-car-radio-2-color-led-button-android-23-pad_p278.html?cPath=4_20

    Any chance to use your tool ?

    Thanks

    • Petrut
      Petrut
      08 March 2012 pm31 17:33 |

      no, sorry

  • Pablo
    Pablo
    06 March 2012 pm31 21:34 |

    Hi Petrutms,
    I have another question about my AS7609 with sinoembed gps board gb108a.

    I am making the USB mod.

    I have connected the red wire to +5v, the white wire to the pin 10 , the green wire to the pin 11 and the black wire to 29-30 pin.

    All seems to be well connected. I have install your patch and I have access to windows desktop but when I plug a pendrive, a keyboard, a mouse or another device , it does not work.

    My question is:

    Shall I have to do something more in the board, as putting some jump or resistor?

    How can I test the USB mod work well ?

    Thanks in advance,

    • Petrut
      Petrut
      07 March 2012 pm31 12:08 |

      it should work...this is the guide i found on internet. If pen driver don`t work, the mod is not done correctly.

  • Pablo
    Pablo
    05 March 2012 am31 11:22 |

    Hi Petrums,
    I bought yesterday the wince patch 6.0 for AS7609 and installed it with no problems.

    I have the same problem that Charalambos Constantinou ,i cannot find out how to enable onscreen keyboard in wince.
    I have calibrated screen with a pen and how you said;

    reflash my system, go to original wincepatch folder, delete eurokeyboard.reg from msd/app/registry/custom and startkey.exe from msd/app and install again using this modified wincepatch folder.

    but the virtualkey doesnt work.

    Can you help me ?

    • Petrut
      Petrut
      06 March 2012 am31 07:27 |

      nowada board or sinoembed?

      • Pablo
        Pablo
        06 March 2012 am31 10:43 |

        sinoembed GB108a

        • Pablo
          Pablo
          06 March 2012 pm31 20:25 |

          Hi Petrut,
          I think , I have found the solution,
          I have changed "NandFlash" for "NFlash" in the cekey.reg file, the three virtual keyboards work now.
          Thanks you

          • Petrut
            Petrut
            07 March 2012 pm31 12:07 |

            great, i`ll modify in my patch too. Thanks

  • Vincenzo
    Vincenzo
    03 March 2012 pm31 12:26 |

    I have this Card Audio with GPS System
    http://www.roadrover.cn/e/productshow.asp?id=276&mnid=19046&classname=Chevrolet

    I have a Dlink W140 Wifi USB dongle.

    I already have access to windows ce 6 (with wince explorer).
    Can I use your wi-fi patch to use my dongle?
    Thanks

    • Petrut
      Petrut
      06 March 2012 am31 07:26 |

      no, your unit is not supported.

  • Obe1
    Obe1
    03 March 2012 am31 10:04 |

    Hello I have an ES848V Erisin 2din system whose GPS gets stuck to 'No Signal'. At Erisin they're telling me that the GPS module must be changed.
    I can't get the information required since there is no way for me get into WindowsCE.
    Would WinCEPatch work - and help?
    Many thanks

    • Petrut
      Petrut
      03 March 2012 am31 11:31 |

      no, you need to change gps board.

  • Jeroen
    Jeroen
    02 March 2012 pm31 21:11 |

    I purchased the Wince 5, Nowada 2450 ( Mesada 2440 ), 800x480 patch but during downloading firmware the system crashed. I checked the SD card afterwards an i think the files were corrupt on the SD card.

    I cannot access the navigation console screen anymore. I think the CE installation is gone. Is there a way to restore this....

    I have a Nowada 2450 device.

    • Petrut
      Petrut
      03 March 2012 am31 11:32 |

      not possible. wince 5 is safe. Unless you flashed with wrong firmware for wrong unit...
      Anyway remove power from the unit for 1 hour and try again with a good sd card.

  • tribos
    tribos
    02 March 2012 am31 04:50 |

    Hi Petrut

    Nice work - I paid, downloaded and installed yesterday. Instructions said:

    "Don`t reflash system if you already have english language in wince, and don`t flash firmware files downloaded from different sites unless you know for sure that are 100% safe."

    So I did not reflash firmware - mine is already in English. But my iPod and BlueTooth interface are not very good - if I reflash firmware, would I get a better interface?

    iPod - difficult to select songs lots of scrolling, no quick way
    BlueTooth - no phone book! I want to import contacts

    Also iPod and 2nd SD Card are not available in Windows - I can not see them in file explorer

    • Petrut
      Petrut
      02 March 2012 pm31 19:29 |

      bluetooth and ipod are not connected to wince, so nothing i can do.

      • tribos
        tribos
        02 March 2012 pm31 23:44 |

        oh... ok, thanks for your reply (& I still think you done a great job). Do you know if anyone else has been flashing the firmware for these "Chinese 2-Din" things?

        Thanks

  • erick cheek
    erick cheek
    02 March 2012 am31 00:05 |

    Hi, I received a recommended wifi adapter and tried the rear usb on my hu and everything works! For the most part I would like to use the main shell rather than running directly in windows, but i would rather use opera mini than IE. Do you have any ideas how to get the main shell to launch opera mini instead of IE? Thanks again.

    • Petrut
      Petrut
      02 March 2012 pm31 19:31 |

      not possible. you need to get in windows or iphone menu.

  • Hizad
    Hizad
    01 March 2012 am31 02:21 |

    I wanted to know which version i should use
    info is as follows
    RIZETECH
    RT GPS
    Windows CE 5.0
    43.7 MB RAM
    ARM ARM920
    480X234 pixels, 65536 colors

    Storage
    NandFlash 27.9 MB
    StorageCard

    My unit has 2 Sd slots and explorer on show 1 Sd that is GPS slot. will your patch rectify it. Thanks

    • Petrut
      Petrut
      02 March 2012 pm31 19:33 |

      item no 8 from wince 5 section
      no, you cant access both sd slots from wince

      • Hizad
        Hizad
        03 March 2012 am31 02:14 |

        Thanks with this can i do the 3g or wifi upgrade and can i be able to install any cab files?

        • Petrut
          Petrut
          03 March 2012 am31 11:34 |

          cab files yes, but 3g or wifi not on your unit

          • Hizad
            Hizad
            04 March 2012 am31 02:33 |

            Install the patch however storagecard/programs/desktop straight goes to iphone theme and from there i cannot change to desktop mode. how do i do it this is because i need to go to system tools since i need to do gapi fix. Thanks

            • Petrut
              Petrut
              06 March 2012 am31 07:26 |

              just press the red exit button? anyway gapi fix is not for your unit.

  • Brian
    Brian
    28 February 2012 am29 11:30 |

    Hi, great work keep it up!

    I had purchased and downloaded your very first release of the patch quite some time ago. Seems like many changes were made to it. Is there an upgrade I can download or must I purchase the patch again?

    Thanks & regards

    • Brian
      Brian
      28 February 2012 am29 11:56 |

      Further info. The purchase was made on the 22nd of April 2010 but the link i had received in the email back then does not function any longer.

  • Chris
    Chris
    28 February 2012 am29 07:47 |

    I patched my Erisin unit with this patch. Main issue is that using a media player such as Nitrogen I only get sound from the front speakers (and i think in mono). This is my major issue as Nitrogen is far better than the built in media player (which does output to all speakers may i add).


    petrut you were looking into it. Any solution yet?

    • Nicola
      Nicola
      08 March 2012 pm31 19:47 |

      You have to deactivate 'music gps' from main settings

    • Petrut
      Petrut
      02 March 2012 pm31 19:33 |

      no, sorry :(

  • robert
    robert
    28 February 2012 am29 00:59 |

    Linksys WUSB100 v2 (Ralink RT3070)is not working get screen (driver name) when i put in rt2870.dll and click ok the same screen is back.

    Intellinet 150N adapter I get no screen driver name no
    Wi-Fi is not working.

    Wi-Fi working when I do this;
    I insert first the Linksys WUSB100.
    I close the driver screen.
    I take out the Linksys WUSB100.
    I insert the Intellinet 150N (new model)
    I get Wi-Fi settings screen all working (WEB,WAP,WPA2,PSK)
    I don’t get driver screen ?? and al is working Why ???

    • Petrut
      Petrut
      02 March 2012 pm31 19:35 |

      you do something wrong, i have no idea what; anyway your linksys seems not compatible at all.

      • Rolf Lindh
        Rolf Lindh
        11 March 2012 pm31 14:11 |

        Hello again Petrut,

        I think I have found some solutions to my problem, but is there a way to restore the D99? I have got an extra Map called StorageCard and I can't delete it even if there are no relevant data on it.
        Kind Regards
        Rolf

  • Rolf Lindh
    Rolf Lindh
    27 February 2012 pm29 20:27 |

    Hello,

    I have installed wince patch on a new dynavin d99 and the installation was done without any problems.
    But the the lack of sentitiveness and respons from the screen in Iphone daily is close to zero and make the solution more or less useless.

    Kind regards

    Rolf

    • Petrut
      Petrut
      02 March 2012 pm31 19:35 |

      tell that to dynavin. crap touchscreen in d99!

  • Mike Henning
    Mike Henning
    27 February 2012 pm29 14:36 |

    Hi just bought hack wince 6 for the newest dynavin unit with d99 dont know if wince is in english or not how can i find out? what happens when wince is already english and i install althogh? greetings mike

    • Petrut
      Petrut
      27 February 2012 pm29 17:49 |

      all d99 are english. nothing will happen:)

  • Abhinav
    Abhinav
    25 February 2012 pm29 19:35 |

    Hi, i downloaded your patch, my hualingan head unit has the nowada 2450 board and running on wince 5. I wanted to know if there is a way that i can play my ipod songs once im in the iphone today applicaton.

    Thanks

    Abhinav

    • Petrut
      Petrut
      26 February 2012 am29 11:44 |

      no, you cant

  • erick cheek
    erick cheek
    24 February 2012 pm29 23:14 |

    Hi, I purchased the wince and wifi patches a few days ago. Everything worked perfect with the WinCe patch. Thanks. However, in the WiFi patch I followed the instructions and submitted the necessary information to you and am still awaiting a response.

    • Petrut
      Petrut
      25 February 2012 pm29 17:17 |

      sent, sorry for delay.

      • erick cheek
        erick cheek
        25 February 2012 pm29 20:19 |

        Thanks, you are awesome! I am awaiting delivery of one of your recommended WiFi dongles. My particular radio has 2 rear USB ports and one in front with an odd adapter cable. Should the rear USB ports work for the wifi dongle or do I need to follow your tutorial to splice in a usb cable? Thanks again!

        • Petrut
          Petrut
          26 February 2012 am29 11:45 |

          i think you need to solder a usb cable

  • Pablo
    Pablo
    24 February 2012 pm29 20:53 |

    Hi Petrut,
    I have an AS7609,
    Is this the correct patch?

    "2. Wince patch ONLY for AS7608 GOLD EDITION V4, Wince 6, with newer Sinoembed board, 800x480"

    Thanks in advance

    • Petrut
      Petrut
      25 February 2012 pm29 17:26 |

      yes.
      no more discount coupons since media stream is now free for a while...

  • Pablo
    Pablo
    24 February 2012 am29 07:53 |

    I want buy patch for as7609
    How can I get a Coupon Code for discount?

  • Bassem
    Bassem
    22 February 2012 am29 07:51 |

    Hello Petrut.

    I am interested in buying your patch, but I am from Lebanon and unfortunately paypal cannot be used from my country. is there any other way to make the paiment ?

    Regards

    • Petrut
      Petrut
      22 February 2012 pm29 21:54 |

      no, there is no other way, sorry.

  • robert
    robert
    21 February 2012 pm29 22:39 |

    Hello Petrut

    Linksys WUSB100 v2 (Ralink RT3070)is not working get screen (driver name) when i put in rt2870.dll and clik ok the same screen is back....?
    I have a Dynavin D99 ver6 wince 6 is de driver rt2870.dll ok??
    Where can i buy a working wifi adp.

    • Petrut
      Petrut
      22 February 2012 pm29 21:53 |

      buy edimax 7711 series

  • robert
    robert
    20 February 2012 pm29 17:36 |

    D-Link DWA-140 ver B3 is not working
    (get Window for driver name)
    now i wil test the Linksys WUSB100-EU it must have the rt3070 chip set ?!
    ....

  • robert
    robert
    20 February 2012 am29 10:17 |

    Petrut

    yesterday i purcast your wifi patch.
    Do i get the new patch now?

    • Petrut
      Petrut
      20 February 2012 am29 11:36 |

      you`ll get it today

  • Sapp51
    Sapp51
    19 February 2012 pm29 21:29 |

    Petrut,
    I have installed winpatch 8.1 and your wifipatch. My adapter seems to be working fine. The problem is that all of my windows menus are in Chinese. I am finding it impossible to get this finally set up and working. Can you help me???

    • robert
      robert
      20 February 2012 am29 09:46 |

      a new internet patch will come to wince 6 next week!

      yesterday i purcast your wifi patch.
      Do i get the new patch now?

    • Sapp51
      Sapp51
      19 February 2012 pm29 23:09 |

      My unit is a v5, Dynavin, I believe I need the firmware update for v5, but the link on my install directions does not work???

      • Petrut
        Petrut
        20 February 2012 am29 11:38 |

        you have wince5, there is no noew patch for wince 5. The firmware links from readme first.doc are working fine. Don`t reflash if everything is working fine.

        • Sapp51
          Sapp51
          20 February 2012 pm29 14:33 |

          I just want to get rid of the Chinese menus, Do I have to re-flash to do this? And does that mean I have to reload everything (wince55 patch) and (Wifi patch)???

          • Petrut
            Petrut
            20 February 2012 pm29 19:08 |

            yes you need reflash.
            and no need to reload patches in some cases, just try it.

  • Igor
    Igor
    19 February 2012 pm29 16:41 |

    Hi.There is a registry backup function in system tools. Where a backuped registry files will be saved?

    • Petrut
      Petrut
      20 February 2012 am29 11:39 |

      nwdflash/msd/app/registry/backup

  • Pablo
    Pablo
    19 February 2012 am29 11:20 |

    Hello Petrut,
    I have a AS-7609, Will your patches work with it?
    thanks in advance

    • Petrut
      Petrut
      19 February 2012 am29 11:31 |

      yes

      • Pablo
        Pablo
        24 February 2012 am29 07:07 |

        But my AS7609 has the new GPS Board GB108A. Can I do the USB mod as you say in your tutorial? Is it compatible pin to pin?
        Thanks in advance,

  • erman
    erman
    16 February 2012 am29 05:34 |

    hi petrut,

    I just would like to confirm is this HU model AU-V8046GD by DYNAVIN wifi competible? What i mean is the usb port is ready for wifi/3g modem without hardward mod?

    This is because i plan to buy this HU and also with your patch.

    Thanks

    • Petrut
      Petrut
      16 February 2012 am29 06:48 |

      yes will work

  • romande
    15 February 2012 pm29 22:58 |

    Hi I have the following chinese multimedia device:

    OS: Windows CE 5.0
    CPU: Alchemy Au1200 MIPS 32bit
    Seems RoadRover (though not sure)
    800х480 7"

    Here is a link to image:

    http://4pna.com/showpost.php?p=197641&postcount=49

    By the way, one strange thing, the bluetooth works only for calls, but not for music.
    Will the patch help me with that?
    Please NOTE that a processor is a MIPS.

    • romande
      15 February 2012 pm29 23:00 |

      Which additional information about the device you need?

      • Petrut
        Petrut
        16 February 2012 am29 06:49 |

        no , my patch will not work on this unit.

  • Razvan
    Razvan
    15 February 2012 pm29 22:55 |

    Hi Petrut,

    I have the AS-7608 V5 unit. The unit runs win ce 6.0, and it looks like the first screen on your wince 6.0 download page. I bought the patch, and it installs correctly but I get an error when trying to run desktop.exe. It says something in chinese...

    Do you know how I can get it to work?

    Multumesc!

    Razvan

    • Razvan
      Razvan
      16 February 2012 am29 03:29 |

      The window title that pop ups with the error is DESKTOP.mscr. The body of the window is a bunch of chinese characters with the word DESKTOP in the middle.

      • Petrut
        Petrut
        16 February 2012 am29 06:50 |

        try to reinstall. if you still have issues, email me, so i can send you a detailed way to fix it.

        • Razvan
          Razvan
          16 February 2012 am29 11:45 |

          Hi Petrut,

          Email sent :)

          Cheers,

          Razvan

  • Igor
    Igor
    14 February 2012 am29 08:58 |

    Hi, Petrut.
    Your wincepatch has working great for a two weeks.
    3G modem was connected automatically after the "connect on starup" was checked in wince sys tools.
    But now a message "error from rasdial" is shown up, and it's possible to connect my 3G modem only manually.
    Perhaps the reason is I tried to setup bluetooth dongle (without success) for OBD software. Can you help to get back "auto connection on start up"? I already several times tried to check "connection on start up" and reboot. No results. :(
    Igor

    • Petrut
      Petrut
      14 February 2012 am29 09:49 |

      you messed with the system files... it says clearly that bluetooth obd is not supported.
      Best solution is to reflash system with firmware ( if you have it ), or manually delete all registry/drivers you added during experiment....

  • Viktor
    Viktor
    13 February 2012 pm29 16:52 |

    Hi Petrut!

    The WinCE 6 patch is working great! And even the reflashing of the firmware was no problem.
    But now I've got two questions:

    Is it possible, to adjust the whole display a few pixel to the left? I don't know why, but my disply is about 5px to much to the right (everytime, within wince and within the programs). So when I try to close an application, it is sometimes hard for me because even with a pen I can't reach the [X] in the upper right corner of the programs. And with a recalibration I just can recalibrate the cursor, but not the display... Is there a solution for this problem?

    And the second thing... is it possible to have a clock always on top (while using the apps)?

    Thanks for your response and help!

    • Petrut
      Petrut
      13 February 2012 pm29 18:24 |

      clock not possible
      about window position, most wince systems have a setting in main gps shell, find it and see if you can adjust size/position

      • Viktor
        Viktor
        14 February 2012 pm29 19:08 |

        Thanks for the tip, now it works! But now the clock is always switching back to the chinese time zone, even when I switch off the auto-update in the windows settings. do you have an idea for that?

        Thanks a lot!

  • Red
    Red
    13 February 2012 pm29 13:51 |

    Hi Petrut,
    I have a generic Chinese Win Ce 6.0 GPS unit for my car. it is the usual all in one device with bluetooth etc.
    I sucessfully installed mio pocket-mini and have unlocked the device. The mio .exe is run directly from the SD card.
    The problem I have is that mio mini does not come with bluetooth interface for use with my phone, i.e. dialer, contacts synch etc..

    Does your solution allow contacts to be synched? Also does your MP3 Player allows the use of playlists?

    Finally, I also have a strange issue. The original shell on the unit is fine except for the fact that only the MP3 music plays via the car speakers. Bluetooth phone and GPS sounds are routed via the crappy in built speakers in the device even though it connects to my car via a quadlock connection. There is no way for me to change these settings, and even looking in Win CE settings I cannot seem to change this. Will a custom solution from you fix this?

    Many Thanks

    R:

    • Petrut
      Petrut
      13 February 2012 pm29 18:26 |

      no, sorry, my patch will not help you.

  • Ralle
    Ralle
    10 February 2012 am29 07:46 |

    Hi Petrut
    (is the ONLY one that fixed the biggest problems on wince 5 units : losing all data after reboot !!!)
    sorry but how can i do dies ?
    thanks !!

    • Petrut
      Petrut
      11 February 2012 am29 10:04 |

      it doesnt apply to wifi settings. Those are stored in a special partition that wince 5 doesnt have it.

  • Viktor
    Viktor
    09 February 2012 pm29 19:31 |

    Hi Petrut!

    I wrote you an e-mail yesterday concerning my problem that my car rns doen't start after the miopocket installation (the same problem that was already several times discussed here in the blog).
    Did you get my mail?

    Thanks, Viktor

    • Petrut
      Petrut
      11 February 2012 am29 10:03 |

      i thinki i already replied, if not, email me again, have so many emails...

      • Viktor
        Viktor
        11 February 2012 pm29 20:05 |

        no, sorry, I can't find an answer of you in my mail account. but i will specifiy the problem again!

        after a miopocket-installation my gps isn't working anymore. here is a video (not from me, but with the same problem): http://www.youtube.com/watch?v=aHuhUMyMk_U

        i read in your blog, that you have a firmware to reflash the device, in this case i want to try this and want to use your wince patch as well.
        because my gps was already in my car when i bought it, i have no information about it. but i found a link with some pictures: http://www.alibaba.com/product-gs/492475670/2_Din_HD_Car_DVD_Radio.html
        the device AND the software seems to be the same, but i'm not sure about if it is win ce 5 or 6... can you help me, please?

        thanks a lot!

        • Petrut
          Petrut
          12 February 2012 pm29 15:59 |

          yes my patch will help and i have firmware for this unit.
          buy wince 6 patch and send me an email to specify that you neeed firmware.

          • Viktor
            Viktor
            12 February 2012 pm29 17:16 |

            will do so! but first i have to wait for a discount coupon :D
            I sent you an email... ;)

  • Ralle
    Ralle
    09 February 2012 am29 09:25 |

    Hi Petru
    sorry my English
    i have all installed ,but How can i save my (wifi) Settings
    please help me
    thank jou

    • Petrut
      Petrut
      09 February 2012 pm29 19:03 |

      on wince 5 is not possible.
      on wince 6 will be saved automatically.

  • jason
    jason
    08 February 2012 am29 04:56 |

    petrut

    im getting the missing files error but there is no readme.doc in the wince6 archive. can you post this info or send to me?
    thanks

    • Petrut
      Petrut
      08 February 2012 pm29 12:02 |

      yes it is. readme first.doc is in all archives. read it carefully.

      • jason
        jason
        09 February 2012 am29 02:26 |

        you are correct it was there installed perfectly once i read it. thanks!
        any advise for switching btween igo primo and the music player. would i have to shutdown gps and start mp3. if so can music from wince play while gps is loaded?


        im on a maisun MT-8001

        • Petrut
          Petrut
          09 February 2012 pm29 19:04 |

          add minimize option in sys.txt.

          [interface]
          show_minimize=1

          • jason
            jason
            10 February 2012 pm29 23:45 |

            ok but i dont want to minimize the wince environment i want to switch btw nitrogen and igo inside the wince. will this help?

            • Petrut
              Petrut
              11 February 2012 am29 10:02 |

              yes

  • Sapp51
    Sapp51
    07 February 2012 pm29 18:11 |

    Petrut,

    I installed your Wifi patch on my 8.1 winpatch Dynavin Ver 5 setup. When I installed my WiFi dongle a box pops up that is mostly in Chinese but I can make out "usb". I have no idea what to type in there.

    My dongle is a Keebox W150NU. With a Realtech 3070 chip.

    Any Ideas??, Thanks

    • Petrut
      Petrut
      07 February 2012 pm29 20:14 |

      just type rt2870.dll
      if nothing happens, adaptor not good.
      Ged edimax 7711 series.

  • Eduardo
    Eduardo
    07 February 2012 pm29 12:17 |

    Hi, you have a tutorial for the USB MODE for the pcb nowada N306?

  • Sapp51
    Sapp51
    05 February 2012 am29 01:26 |

    Petrut, I am running a Dynavin WinCE5 (v5). When I start up my IGO Prime Nav Program I get a request for my GAPI selection. There is none. What is the work around for this? Thanks

    • Petrut
      Petrut
      05 February 2012 am29 10:48 |

      run system tools and run the gapi fix!

      • Sapp51
        Sapp51
        05 February 2012 pm29 15:46 |

        So, where are the system tools located, what program on wincepatch do I use to access it?

        • sapp51
          sapp51
          05 February 2012 pm29 16:39 |

          I found the system tools but there is no GAPI FIX listed. Were they somehow missing from my install???tyrioess for

          • Petrut
            Petrut
            05 February 2012 pm29 17:28 |

            i`m sure there is. In tweaks section. If you bought the right patch for dynavin...

            • Sapp51
              Sapp51
              05 February 2012 pm29 19:20 |

              I'm an owner from a year or so ago. I downloaded 8.1 a couple of months ago. Possibly i need the latest DATA file. Maybe the one I'm using is missing GAPI Fix ??? Where can I get the latest data zip???

              • Sapp51
                Sapp51
                05 February 2012 pm29 20:58 |

                OK were good to go now. I reloaded everything and found the fix this time around. Thanks for your help!

  • joan
    joan
    04 February 2012 pm29 23:28 |

    hey guys i have a performance teknique ICBM-9706 i got from china i have been looking in alot of forums and stuff to see if i can make this 2 din boot wince can you guys help me thank you

  • Holger
    Holger
    04 February 2012 pm29 19:27 |

    Hi Petrut,

    I bought and downloaded WIN CE6 Patch for Nowada 2450 Boards, Version 8.3. I installed it on AS-7608 V5.
    But I only could install the WINCE-Patch. There was no firmware for WIN CE6.
    On the desktop I can see the language in english, but I got still some chines messages for new USB-device.

    Is there any way the change the WIN CE6 completely to english?

    Thanks!

    • Petrut
      Petrut
      05 February 2012 am29 10:46 |

      no, is not possible, as said on this site. Patch is 99% english.

  • alexsela
    alexsela
    03 February 2012 pm29 20:48 |

    Hi guys!

    I've been struggling for a while on my new 2din navigation system and of course I arrived to your web!! My problem is that I want to have an external screen with the GPS on it. The video-output does not show the GPS (even on 2-zones mode).

    Could your think about something for this??

    I tried extracting the signal from the Nowada board directly (thanks to your tutorial info) but this is not possible/direct,..
    I guess that your patch has nothing to do with that, am I wrong??

    Any advice would be appreciated!

    Thank you so much!

    • Petrut
      Petrut
      05 February 2012 am29 10:45 |

      no, patch will not help, sorry.

  • Chris
    Chris
    03 February 2012 am29 08:41 |

    I've just updated my Erisin unit with this patch. Fairly happy with it. Only two issues I have are

    a) can't get at the WINCE front end desktop (Petrut is looking at it) and

    b) using a player such as Nitrogen I only get sound from the front speakers (and i think in mono). This is my major issue as Nitrogen is far better than the built in media player (which does output to all speakers may i add). Text to speech seems ok in Igo Primo though going through all speakers so it can work

    Anyone any ideas please

  • Buna ziua
    Buna ziua
    02 February 2012 pm29 14:43 |

    Salut Petrut sunt si eu din bucuresti si am o navigatie dynavin pe un mercedes w203 din 2001 si vreau si eu patchul pentru desktop windows ce 5.0

    • Petrut
      Petrut
      03 February 2012 am29 11:55 |

      se poate cumpara direct de pe site, item 1 din pagina de wince 5.

      • Boboc Andrei
        Boboc Andrei
        04 February 2012 pm29 23:13 |

        Mai am o intrebare daca win ce e in chineza nu sunt probleme nu adica am acoo si updetul pt engleza?

        • Petrut
          Petrut
          05 February 2012 pm29 12:09 |

          Ai tot ce trebuie in patch.

  • Paul3
    Paul3
    31 January 2012 pm31 18:18 |

    Salut, ups scuze anteriolul mesaj l-am pus la un reply !

    • Petrut
      Petrut
      31 January 2012 pm31 20:27 |

      nu stiu daca se poate 3g sau wifi. Vezi daca poti conecta un usb stick si il poti accesa.

      • Paul3
        Paul3
        02 February 2012 pm29 16:05 |

        Mi-am facut o mufa USB mod si am incercat prin ea, se pare ca nu vede, nici wifi, nici storage , nimic nu misca ! doar ca si conexiune cu PC lucreaza . Nu lucreaza ca host sa fie o treaba hardware sa se mai poate face ceva?

        • Petrut
          Petrut
          03 February 2012 am29 11:53 |

          nu, nu ai ce ii face, sorry.

  • Sergei
    Sergei
    30 January 2012 pm31 22:11 |

    Hello. if i buy Wince patch and install for Dynavin platform D99 i can see this menu http://dynavin.com.ua/sites/default/files/d99_platform_1.png
    and i have 5.0 version, i need patch 5 version-yes?
    tnx.

    • Petrut
      Petrut
      31 January 2012 pm31 20:25 |

      all d99 come wince wince 6.0. so you need wince 6 patch.

  • Regis
    Regis
    27 January 2012 pm31 16:02 |

    It runs on Motor One M1(Multimedia Central´s) ?
    http://www.m1-motors.com/

    It runs WinCe 6.0.

    • Paul3
      Paul3
      30 January 2012 pm31 17:16 |

      Salut, eu am un GPS allview 8802 , e cu win ce5 am instalat pe el MioPocket 4.0 ,merge oglinda! Daarrr, imi place sa sap prin el, oare wincepachul tau merge pe el ? e MESADA 2413 , 43,8 RAM,ARM960 s3c2413, la 320x240 65k culori,NANDFlash 914mb, ce am uitat? aaa... vede sd pina in 2 gb si are iesire mini USB, mi-as dori sa pot pune wifi sau 3g, oare merge?

  • Chris
    Chris
    27 January 2012 am31 10:02 |

    Hi, I have an Erisin ES960F Chinese 2din hu with win ce6.

    BSP VERSION AIVCE6_NANO_Rel1.03
    AT8X0 6.0
    Windows Embedded CE 6.0.3122
    118 MB RAM
    ARM1136JF-S AT840
    800 x 480 pixels, 65536 colors

    ResidentFlash: 4.98mb
    NandFLASH: 56.8mb


    \\Plugins
    Application Data
    My DocumENTS
    NandFLASH
    Program files
    Recycled
    ResidentFlash
    StorageCard
    Temp
    Windows
    (Chinese writing)

    Will the patch work?

    Regards CJA

    • Petrut
      Petrut
      27 January 2012 am31 10:26 |

      yes, a custom one.
      Buy any patch and send me an email to request custom patch.
      Will be sent in maximum 24 hours.

      • Chris
        Chris
        29 January 2012 pm31 12:17 |

        Do you have a picture of what the radio app looks like?

        I'm assuming it will do radio

  • Albert
    Albert
    26 January 2012 pm31 19:12 |

    Hi, I have a Chinese 2din hu with win ce6. Reading through your site and blog I have seen 1 similar hu.

    This is what I have.
    Program memory 112 mb | Storage memory 5.02 mb

    BSP version ACVCE6E VB_rel 1.00.5.02
    AT8X0 6.0
    Win embedded CE 6.0
    117 mb
    ARM1136JF-S AT840
    800 x 480 65536 colors

    \\Plugins
    Documents and Settings
    GPS Data
    My Documents
    Nflash
    profiles
    Program files
    Storage Card
    Temp
    Windows
    (Chinese writting)

    Will the patch work?

    • Petrut
      Petrut
      27 January 2012 am31 10:25 |

      yes, a custom one for your partitions will work fine.
      Buy any patch and send me an email to request custom patch.
      Will be sent in maximum 24 hours.

  • Vec
    Vec
    21 January 2012 pm31 12:06 |

    Hello,

    i installed the patch for WINCE 5 and wait now for the wifi patch.
    is it possible to use wifi and tmc with ftdi seriell simultaneously?

    greetings

    • Petrut
      Petrut
      21 January 2012 pm31 14:40 |

      not possible due to driver conflicts.
      maybe i can fix it in a future release.

  • Paul
    Paul
    20 January 2012 pm31 22:45 |

    hy there.i just want to ask you about a ES868GBP product with wince6.0.The motherboard is AIVCE6_NANO_REL1.03, Windows CE 6.00.3122, 117.8 MB RAM, ARM1136JF-S AT840, 800X480 PIXELS, 65536 colors.I would like to know which patch would work for me.The main shell looks like the second picture( http://www.golfmkv.com/forums/showthread.php?t=107203), the one with blue(navigation, e-book, music , picture).10x in advance
    P.S. : i don't want to look silly, but are u a romanian?(by the name Petrutz).I'm waitting for your reply.Cheers

    • Petrut
      Petrut
      21 January 2012 pm31 14:39 |

      i need partitions list to be sure.
      yes i`m romanian :)

  • khosro
    khosro
    20 January 2012 am31 11:32 |

    Dear Petrut,
    Please show the Structure of SD card after installing of patch. I put my navigation software and wince together on SD card but I don't run any navigation programs. but if I put only wincepatch on SD then I see program icon after startup of desktop. So what is going on.

    • Petrut
      Petrut
      20 January 2012 pm31 12:31 |

      i don1t understand the problem.
      you installed wincepatch,OK
      you put some navi software on same SD, OK
      then use system tools/shortcut creator to put valid shortcuts on desktop, or edit icons path in iphone menu if you want to use iphone menu to launch apps. Instructions in readme first file.

  • Jean-Marc
    Jean-Marc
    19 January 2012 pm31 21:45 |

    Sorry, a piece of my message disapear, I've both the WinCe 6.0 patch for TID 7501.

  • Jean-Marc
    Jean-Marc
    19 January 2012 pm31 21:43 |

    Hello,
    Yesterday, I just bought the wincepatch
    >
    I've a TID7501 with WinCe6 /Novada 2450/800x480

    I've just install the wincepatch with no issues but when I launch the desktop.exe I get the famous error:
    There is no application associated with 'Desktop' run the application first....

    Do I have to install any firmware ? If yes, where can I get it ?

    Thank you in advance for your support.

    Jean-Marc

    • Petrut
      Petrut
      20 January 2012 pm31 12:29 |

      sent email with solution :)
      latest winca firmware sucks !!!

      • Piotr Grzeszczyszyn
        Piotr Grzeszczyszyn
        23 February 2012 am29 10:28 |

        I've the same problem with patch,
        I've a TID8952 with WinCe6 /Novada 2450/800x480.
        Do I have to install any firmware ? If yes, where can I get it ?

        Thank you in advance for your support
        Piotr Grzeszczyszyn

        • Petrut
          Petrut
          23 February 2012 pm29 17:49 |

          if you are my customer, you can get it. just send me an email.

  • PeterU
    PeterU
    18 January 2012 pm31 21:54 |

    The Structure is as follow:
    FLASHDISK
    My Documents
    Profiles
    Program Files
    SorageCard
    Temp
    Windows
    chinees signes (I think a shared folder)
    chiness signes .lnk

    Do you need a Picture of the deivce, I found two devices which looks similar : HASDA H-988 and OMT-8243

    Regards, Peter

    • Petrut
      Petrut
      19 January 2012 pm31 13:48 |

      you can try to do usb mod on your unit. The default usb is not for wince.
      also a custom patch will work fine.

      • PeterU
        PeterU
        19 January 2012 pm31 15:23 |

        Usb mod? How ?

        Could you please provide me the custom path?

        Where and how do I pay , is paypalmpossible?

        Regards, Peter

        • PeterU
          PeterU
          19 January 2012 pm31 18:12 |

          I opend the device, i have two mainboards and no clue which one should the usb be soldert to.
          Can I send you the two pic and youb tell me which could be nearly the mainboard ?
          On one ( where the pgs is) i found a 5 pin with description GND, ILL, XD, TX, RX. Could be there are some more letters on the ending but the connector is covering them. Is this usb?

          Regards, Peter

          • Petrut
            Petrut
            19 January 2012 pm31 19:30 |

            read tutorials please, there are pictures there.
            the gps board is the one with the gps antenna attached, usually a small board.
            you can buy any pathy on my site and request by email a custom one, that will be sent in 24 hours.

  • PeterU
    PeterU
    18 January 2012 pm31 20:58 |

    Hi Petrut

    My unit is (I believe) a smdk2450 board with wince 5, the letters on the screen are so small that I can't read it proper.
    My only problem is that I have build “by myself” an USB-TMC and I have the drivers for it and the unit has a USB Port at the front, BUT, when I plug in to the unit a software is automatically starting which is a player for USB Sticks.
    I can't get the popup for installing new device driver. How can I disable this annoying software, so that the OS driver screen can pop up? And how can I change the resolution on the unit?

    I would be very thankful for help.

    Kind Regards, Peter

  • Ron
    Ron
    16 January 2012 pm31 17:46 |

    Hi, I have a XTRONS TD717G.
    BSP Version AIVCE6_NANO_Rel1.03...
    AT8X0 6.0
    Windows Embedded CE 6.0.3122
    118 MB RAM
    ARM1136JF-S AT840
    800x480 pixels, 65536 colors
    What patch do I need for this unit?

    Thanks.

    • Ron
      Ron
      19 January 2012 pm31 16:21 |

      Hi Petrut,

      I found this:

      \\Plugins
      Application Data
      My Documents
      NandFLASH
      Program Files
      Recycled
      ResidentFlash
      StorageCard
      Temp
      Windows
      (Chinese Text).Ink

      I hope this is enough information.
      Let me know if you need more.

      Greetings, Ron.

    • Petrut
      Petrut
      18 January 2012 pm31 18:59 |

      need partitions list

      • Ron
        Ron
        19 January 2012 pm31 16:22 |

        Hi Petrut,

        I found this:

        \\Plugins
        Application Data
        My Documents
        NandFLASH
        Program Files
        Recycled
        ResidentFlash
        StorageCard
        Temp
        Windows
        (Chinese Text).Ink

        I hope this is enough information.
        Let me know if you need more.

        Greetings, Ron.

        • Petrut
          Petrut
          19 January 2012 pm31 19:32 |

          yes, a custom patch will work.
          buy any patch from site and send me an email requesting custom one.

          • Ron
            Ron
            21 January 2012 pm31 18:58 |

            OK. I bought the WINCE 6 patch.
            I will send you email now.

            Greetings, Ron.

  • khosro
    khosro
    16 January 2012 am31 11:34 |

    I opened my HU to mod an usb cable but I found already usb connector on printplate of HU.
    1) what is that? wherefor can I use it?
    2) how can I tether with HU?
    best regards

  • mary
    mary
    11 January 2012 pm31 20:04 |

    Hi

    i have an dvn-e46 dynavin win6

    is it nesessary to install first the win 6 patch and then the wifi patch? or i can just buy the wifi patch and do my work?

    also can i use a random wifi usb stick as well?

  • dave
    dave
    11 January 2012 pm31 18:23 |

    hi i have a gps unit says toyota. it has wince 6 but dont have any maps or software on it. Also when i click on gps nothing appens. looked on gps path and it says something about igo and storage path. also wanted to know if i can swith form were the maps are located (use the other sd card slot or usb port) because previous owner said sd card for gps is not working. and if you have the maps? thank you

    • dave
      dave
      11 January 2012 pm31 19:19 |

      it is a witson W2-D9108T for TOYOTA

      • Petrut
        Petrut
        13 January 2012 am31 07:19 |

        i don`t offer maps or navi software. If the gps sd card is dead, then NO gps, ever.
        also the patch is not compatible with your system, sorry.

  • Markus
    Markus
    11 January 2012 pm31 16:05 |

    Hallo,
    i have a Maxyon Energy 2DIN Device.
    NOWADA
    NWD_TT4X0A Multiplatform 6.0
    Windows Embedded CE6.0
    93,7MB RAM
    ARM1136JF-S TT4X0A
    800x480 Pixels, 65536 colors

    BINFS: 76,6MB 76,6MB used 0MB free
    NWDFlash: 5,04MB 1,01MB used 4,03MB free
    Program memory: 92,7MB 23,1MB used 69,7MB free
    Storage memory: 1MB 68kB used 956kb free

    Is this Device compatible with your Patch?

    Thanks!

    • Petrut
      Petrut
      11 January 2012 pm31 17:16 |

      run total commander and tell me partitions names

      • Markus
        Markus
        12 January 2012 am31 06:39 |

        Hallo,
        Therese was a more button at resinfo!
        now IT shows:
        Nandflash 39,9mb. 39,6mb Dresden
        Storagecard 1,83gb 1,82gb free

      • Markus
        Markus
        11 January 2012 pm31 19:26 |

        TotalCommander shows the following:

        \\Plugins
        Application Data
        BINFS
        MyDocuments
        NandFlash
        NWDFlash
        Program Files
        Recycled
        StorageCard
        Temp
        Windows

        • Petrut
          Petrut
          13 January 2012 am31 07:16 |

          yes will work fine.

  • Jarrod
    Jarrod
    11 January 2012 am31 06:41 |

    Hello Petrut, I am wanting to get the patch for the NWD2450 win ce6, but the unit i want to install to has had a failed attempt of mio..... on the startup of the Nav screen, ( once i press the Nav button from the menu, the system hangs on the "welcome to Navigation System" screen. If i get your patch, will this be able to be installed, and repair firmware of unit?..

    Cheers...

    • Petrut
      Petrut
      11 January 2012 am31 10:45 |

      tell me exactly what unit you have.
      model, type, radio screenshots

      • khosro
        khosro
        16 January 2012 am31 11:30 |

        I opened my HU to mod an usb cable but I found already usb connector on printplate of HU. 1) what is that? wherefor can I use it? 2) how can I tether with HU? best regards

      • Jarrod
        Jarrod
        12 January 2012 am31 06:00 |

        Hi, unit is found here..
        http://www.ebay.com.au/itm/7-Car-DVD-GPS-Dual-Antenna-DVB-T-MPEG-4-Player-Stereo-/220824271926?pt=AU_Car_Parts_Accessories&hash=item336a26fc36#ht_16507wt_1031

        trying to paste screen shot of the frozen screen, but no luck..

        its a blue screen, words "Welcome to Navigation System". has frozen on this screen everytime i attempt to start the nav system. the Mio install log said install complete, and then froze on this screen.... hope you can help, ( and your patch looks better!!! wish I had of found you first!!!

        cheers,

        Jarrod.

        • Petrut
          Petrut
          13 January 2012 am31 07:17 |

          email me and request a firmware to try.

  • mario
    mario
    10 January 2012 pm31 22:44 |

    during the install i got an error message... Couldn't create directory '\ResidentFlash\$MSD$'
    ... my system is this one.. Waywell WD6050 with i go8
    http://www.golfmkv.com/forums/showthread.php?t=74989&page=3

  • Siegfried Oertel
    Siegfried Oertel
    09 January 2012 pm31 23:19 |

    Hello Petrut,
    i have an AV601 from Auvidio (wince 5)without TMC.
    Did you know about it?
    i need a wince hack and the Wifi adon.
    Best wishes from Germany

  • desertfalcon
    desertfalcon
    08 January 2012 pm31 17:25 |

    I have a China RNS, never looked which WINCE is in (I assume its Wince5). Now when I press the NAVI button, the screen remains dark. I opened the unit and the GPS module looks like a Nowada 2450. May be the content of the flash memory is destroyed or may be the hardware of the GPS module is dead. Is it possible to load your wincepatch also, if the GPS module does not start?

    • Petrut
      Petrut
      08 January 2012 pm31 18:21 |

      no, the gps module is dead. contact the manufacturer for another one.

      • desertfalcon
        desertfalcon
        08 January 2012 pm31 18:42 |

        thanks petrut for your quick response

  • Nick
    Nick
    08 January 2012 pm31 17:21 |

    I was wondering if I could do the usb host hack on my unit.
    Resinfo.exe shows a Nowada 2450 running WinCE 5.0, but the motherboard seems to have the gps unit implemented on board and not as a separate card. Looks like this one:
    http://img846.imageshack.us/i/img5545.jpg/

    • Petrut
      Petrut
      08 January 2012 pm31 18:19 |

      the module in right side in the image looks like a gps board !

      • Nick
        Nick
        08 January 2012 pm31 20:09 |

        Thanks Petrut, that module is on the top of this new picture.
        http://img193.imageshack.us/img193/7665/imgp0878medium.jpg
        The gps cable however connects on the motherboard at the botom left part.. The module itself has a small wire like antenna (5cm long) attached to it and no identifying marks at the pcb.

        • Petrut
          Petrut
          09 January 2012 am31 11:16 |

          then the gps board is built in. you have no way to make usb mod.

  • Tim
    Tim
    07 January 2012 pm31 14:16 |

    Not sure if the WinCE 5 patch will work. Here is the info I got when I ran Resinfo.exe:

    Risetech RT GPS
    Windows CE 5.0
    39.1 MB Ram
    ARM ARM920
    480 X 272 65536 Colors

    Let me know if it will work for me and if so which one I need.

    Ty!

    • Petrut
      Petrut
      08 January 2012 pm31 18:17 |

      not compatible with your unit. too old, low ram.

  • stu
    stu
    07 January 2012 am31 08:27 |

    Hi has anyone been successful in getting live traffic on primo 1.2 on there dynavin without a tmc input if so can you post details

    thanks

  • Roka
    Roka
    06 January 2012 pm31 19:23 |

    Hi Petrut!
    Will the patch on this car navigator? System wince 6
    http://www.wincalcd.com/en/products_view.php?id=186&str=Indexabout

    • Petrut
      Petrut
      06 January 2012 pm31 20:32 |

      Yes will work perfect

  • Oliver Formicola
    05 January 2012 am31 00:20 |

    Hi,

    It will work on this board type?

    Product Item No
    HGFY-6828

    • Petrut
      Petrut
      05 January 2012 am31 11:12 |

      send me partitions list and all info requested in tutorials.
      run the tools.

  • Jerzy
    Jerzy
    05 January 2012 am31 00:03 |

    Resident flash:432MB 216used and sdmmc disk
    system:Samsung SMDK6410 6.0
    Windows Embedded CE 6.0.3122
    96,8mb Ram
    ARM176JZF-SS3C6410 (800mhz)

    • Petrut
      Petrut
      05 January 2012 am31 11:13 |

      yes, a custom version should work. I cant guarantee desktop functionality but everything else will work.

      • Jerzy
        Jerzy
        05 January 2012 pm31 12:15 |

        3g patch also will work?( usb flash drive read, but the usb modem no.LEDs in modem blinking correctly)

        • Petrut
          Petrut
          05 January 2012 pm31 12:40 |

          with the right modem, huawei e1550,i think so.

          • Jerzy
            Jerzy
            05 January 2012 pm31 22:41 |

            This is a device: http://www.wondeproud.com/product_1_1_1.html

            Certainly navibox not to die?

            • Petrut
              Petrut
              06 January 2012 am31 08:53 |

              there is always a risk...but if you have the original firmware you are safe.

              • Jerzy
                Jerzy
                06 January 2012 pm31 13:56 |

                The original firmware is only in the device-I do not have a copy ...

  • Jerzy
    Jerzy
    04 January 2012 pm31 20:25 |

    Hi Petrut!
    I have a Navibox HD unit and im wondering if this will work for it?
    CPU ARM11 / 800 MHz

    • Petrut
      Petrut
      04 January 2012 pm31 21:28 |

      with a custom patch, maybe.
      send me more details about partitions

  • Serg
    Serg
    04 January 2012 am31 02:16 |

    Hi Petrut,

    please, when you have some time,
    1) Do you know if your wincepatch, WiFi patch,3G patch will work with this unit?

    http://www.aliexpress.com/product-fm/352548654-2din-in-dash-Special-Car-DVD-GPS-for-Hyundai-Accent-with-GPS-TV-RDS-IPOD-USB-wholesalers.html

    ID:0B4C-80110830-211110-484E03-20100701
    Ver: 128E-1260-6026-110707(Windows@ CE 6.0)

    Resinfo results:

    Nowada_2450
    NWD_242250 multi-platform 6.0
    Windows Embedded CE6.0.3122
    111MB RAM
    ARM1136JF-S AT550
    800x480 pixels, 65536 colors

    Storage

    NWD FLASH: 7,91MB
    7,79MB used 124kB free

    NAND FLASH: 38,2MB
    548kB used 37,7MB free

    StorageCard: 3.83MB
    1.84 MB used 1.99 MB free

    2) And if yes, whether can work adapter BT-ECU OBD-II (CAN) bluetooth ( http://www.check-engine.ru/cars.php?list=carinfo&carid=119) and USB mod Wifi adapter simultaneously?


    Best regards

    • Petrut
      Petrut
      04 January 2012 pm31 16:36 |

      wincepatch and wifi will work fine.
      no way for 2 usb devices in same time.

  • youssef nicola
    youssef nicola
    02 January 2012 pm31 15:25 |

    Hi,

    I bought a waywell WD6018 car dvd car whose specs are here:

    http://waywell.en.alibaba.com/product/451024069-200157538/Waywell_Car_video_for_SEAT_ALHAMBRA_IBIZA_Navigation_Bluetooth_Radio_IPOD_Touch_Screen_Video_Audio_Player.html

    here's a video of the unit
    http://www.youtube.com/watch?v=rYj-URIJ_Vc&feature=related


    Its running windows ce 6.0
    Is your patch compatible?

    Thanks

    • Petrut
      Petrut
      02 January 2012 pm31 18:25 |

      sorry, not compatible.

  • aseaver
    aseaver
    01 January 2012 pm31 17:09 |

    I have the wince 5.0 patch running great on my Dynavin V5....thank you very much. I was wondering is there anyway to download Wince 5 updates or upgrade to wince 6.0 on my system?

    • Petrut
      Petrut
      02 January 2012 pm31 18:10 |

      not possible.

  • Djuby
    Djuby
    23 December 2011 pm31 13:31 |

    Hi Petrut,

    Do you have any plans to port Android to those devices?

    Best regards,
    Djuby

    • Petrut
      Petrut
      26 December 2011 pm31 21:22 |

      not possible.

  • BullOfOz
    BullOfOz
    21 December 2011 am31 04:26 |

    Hi Petrut,

    please, when you have some time,

    1) Do you know if your patch will work with this Roadrover unit?

    Resinfo results:

    BSP Version: PrimaCE6EVB_rel9.04
    TT4X0A 6.0
    Windows Embedded CE 6.0.3122
    95.8 MB RAM

    ARM1136JF-S TT4X0A
    800x480 pixels, 65536 colors

    (from WR-Tools ResInfo)
    Storage
    NAND FLASH: 107MB
    1.55MB used 105MB free

    StaticStore: 93.7MB
    41.2 MB used 52.5 MB free

    2) And if yes, do you know if it needs a USB mod and if Wifi will work?

    (Actually connecting a USB Flash drive shows up as USB disk and I can access the files on it...)


    Best regards

    • Petrut
      Petrut
      22 December 2011 pm31 22:31 |

      yes, i can make a custom patch for it, but after holidays.
      wifi will work too.

      • BullOfOz
        BullOfOz
        04 January 2012 am31 01:55 |

        Hello Petrut,

        I sent the money for the custom patch and Wifi.
        Partition list:
        "Storage Card"
        "StaticStore"
        "NAND FLASH"

        Will send the DeviceId later by email for Wifi.

        Thanks

      • BullOfOz
        BullOfOz
        23 December 2011 am31 02:40 |

        Excellent!
        Happy Holidays Petrut!

  • JH
    JH
    14 December 2011 pm31 18:08 |

    Hi,

    My SD card crashed and I tried to login to download another copy but my login is not recognised. Do logins expire after a certain time?

    • Petrut
      Petrut
      14 December 2011 pm31 20:24 |

      no. send me an email with your purchase copy to verify account.

  • vincenzo
    vincenzo
    14 December 2011 am31 11:06 |

    hi

    I have the dynavin product with this serial number: 8297 - 82a4 - 6011 - 090725. wince5.0

    which pach is available for me?

    • Petrut
      Petrut
      14 December 2011 pm31 20:25 |

      item 1 from wince 5 section

      • vincenzo
        vincenzo
        14 December 2011 pm31 22:15 |

        the system sayd me data flies missing

      • vincenzo
        vincenzo
        14 December 2011 pm31 20:31 |

        i try but don't start

        • Petrut
          Petrut
          15 December 2011 am31 06:59 |

          in readme file there is link for data files and how to add them in wincepatch folder. Please read it carefully

          • vincenzo
            vincenzo
            15 December 2011 pm31 15:04 |

            all ok many thanks

  • gloom
    gloom
    13 December 2011 pm31 23:57 |

    Hi.
    I have a new Erisin ES818G one din unit and im wondering if this will work for it?
    Also will the Track Next/Prev work with the new audio player or not?

    • gloom
      gloom
      14 December 2011 am31 00:35 |

      I mean the external buttons on the unit

      • Petrut
        Petrut
        14 December 2011 pm31 20:26 |

        not compatible with your unit, sorry.

  • Phil
    Phil
    13 December 2011 pm31 16:43 |

    Hi.

    It looks as if I have reflashed the english language firmware as all I am getting now is square boxes instead of words is there anyway of getting it back.

    Also when I tried to install the wince 5 update it came back and told me there where files missing is this to do with the language problem.
    Would be grateful for any advice.

    Cheers

    • Petrut
      Petrut
      13 December 2011 pm31 21:39 |

      just go to settings and change language to english to get rid of those boxes.
      and about missing, files, read carefully the readme and download data files folder.

      • Phil
        Phil
        14 December 2011 am31 11:57 |

        As you can guess I,m kind of new that this so Thanks for that managed to sort the first problem, with the second one should I replace the program files folder already in the wincepatch 5 folder with the new one or should I exract the folders from the other program files folder and pasted them into the folder in the wincepatch 5 folder.

        • Petrut
          Petrut
          14 December 2011 pm31 20:27 |

          extract program files folder from data archive and add it in wincepatch folder, this way you`ll have a big program files folder.

  • Phil
    Phil
    13 December 2011 pm31 12:49 |

    Hi.

    I've just downloaded your patch for wince 5 and after reading the instructions when't to download the firmware update but the site is down so was wondering where I could get the firmware update to change it to english.

    Cheers

    • Phil
      Phil
      13 December 2011 pm31 13:17 |

      Scrub that managed to figure it out.

      Cheers

  • Mario
    Mario
    12 December 2011 am31 05:54 |

    Hi Petrut

    I recently bought a VW 2Din unit for my Seat Leon, it works great but I cant change the logo, the logo button in th setup doesn't work. Can your patch fix the logo or let me change is? any extras unlocked would be great, Im mainly interested in the logo change, here is my unit details:

    Nowada_2450
    Windows CE 6.00.0
    111.3 MB Ram
    ARM1136JF-S AT840
    800x480 pixels
    65536 colors

    Thanks!!
    Mario

    • Petrut
      Petrut
      13 December 2011 am31 06:53 |

      Nothing I can do, sorry

  • Jimmy
    Jimmy
    10 December 2011 pm31 18:11 |

    Greetings Petrut,
    I am new to your blog and I would like to purchase your patch. After running ResInfo.exe on unit via SD card I have Dynavin E83 with following Info:
    [Mesada SMDK6410 6.0 / Windows CE 6.0 3122 / ARM1176JZF-S S3C6410 (666mHz) / 800x480 pixels / 65536 colors]
    Some issues I would like to resolve are:
    1) Change WinCe to english.
    2) Use iPhone via USB cable to unit.
    3) Play navigation audio/text via car audio.
    4) View/play mp3 video.
    Please advise if you have a patch available for my units OS and if some of my issues can be resolved.
    Many Thanks.
    Regards,
    Jimmy B

    • Petrut
      Petrut
      12 December 2011 am31 11:36 |

      no, i can`t help you with your issue.

    • Jimmy
      Jimmy
      11 December 2011 pm31 19:06 |

      Hello Petrut,
      Disappointed to hear.
      Everywhere I read you said you have patches for all Dynavin,s. If not you would create one.
      So, there is nothing we can do?
      At least can you help me to change WinCe to English?
      Thanks,

    • Petrut
      Petrut
      11 December 2011 am31 11:26 |

      no patch is compatible with your system, sorry

      • Jimmy
        Jimmy
        14 December 2011 am31 01:29 |

        Can you advise or direct me, how to resolve usb connection with iphone. Wince window pops up in chinese. Is it looking for a driver? How do I start the onbord keyboard to enter data. I have no problem connecting to memory stick or ipod. I have wrtools, resinfo, cecmd on sd card.
        Thanks,
        Thanks,

        • Petrut
          Petrut
          14 December 2011 pm31 20:28 |

          you can`t connect iphone using usb. not supported.

  • amershi
    amershi
    09 December 2011 pm31 21:06 |

    Hi I had acar dvd gps (Kia Optima 2011 K5)
    Ver: 112D-112D-6026-110213(Windows@Ce 6.0)800×480
    Storge memory:113508 KB
    Available: 94660KB
    With steeering wheel set and bluetooth
    Which patch work with it and how can i use 3G and internet with it,Plz replay on my e-mail
    Thanks

    • Petrut
      Petrut
      10 December 2011 pm31 15:20 |

      i need complete details. run the tools from tutorils and send me the results. Also a link to the unit.

  • Ladislau Dios
    Ladislau Dios
    09 December 2011 pm31 18:35 |

    Hi Petrut!
    I own a China Din 2 Navi Radio Name: MFC-7001
    Will your WinCe6 patch work on it? Do you have a complete patch wich the Wifi patch for using my Samsung Galaxsy S2 as Modem to get into the Internet?
    Tanks

    • Ladislau Dios
      Ladislau Dios
      09 December 2011 pm31 18:43 |

      Sorry its a MFC 7002 Radio

      • Petrut
        Petrut
        10 December 2011 pm31 15:19 |

        run the tools from tutorials and send me the results, with pictures of the main radio menu too.

        • Ladislau Dios
          Ladislau Dios
          10 December 2011 pm31 16:27 |

          new Info:

          nwd_2450 wince 6.0; 111 mb Ram, 320x240 pixel;
          made some pictures if you wanna see.

          I got also into Windows Control Panel, explorer etc. nice mostly everything on Chineese, but working fine

  • Alan Seaver
    Alan Seaver
    06 December 2011 am31 02:42 |

    Petrut, I purchased WinHack and Wifi back in october 2010. I had my EW-7711 wirless USB working with my phone but I had the SD card crash so I had to redo everything. I have Dynavin V5 with WinCE 5. WinCE keeps asking for the driver name when I plug in USB wirless device. Suggestions?

    • Alan Seaver
      Alan Seaver
      06 December 2011 am31 04:09 |

      Never mind Petrut. I was using the wrong file. Everything works now.

  • Ian
    Ian
    05 December 2011 pm31 18:43 |

    Hi I have a DYNAVIN D90 platform. Which patch is the best upgrade please. How do you install?

    • Petrut
      Petrut
      05 December 2011 pm31 18:48 |

      look if is wince 5 or 6, and get the right patch.
      all instructions are provided.

      • Ian
        Ian
        11 December 2011 am31 03:10 |

        Petrut, I watched the video and see no sign of the radio or bluetooth screen for the phone. How to you find them using the patch?

        • Petrut
          Petrut
          11 December 2011 am31 11:28 |

          you can`t.
          wince side is completely cut off from the rest of
          the system. is only for gps board !

  • DomCo
    DomCo
    04 December 2011 pm31 17:52 |

    I've just found this place, nice job.
    However i've not found the infos i need, so i ask here.
    The FLAC support on the new audio player does use playlist and / or .cue format files?
    FLAC support is only stereo or can do also multichannel FLAC? If this is specific to some model only, please give me a hint. Thanks.

    • DomCo
      DomCo
      04 December 2011 pm31 17:53 |

      Forgot one thing: Flac with 24/96 audio can be played?

      • Petrut
        Petrut
        05 December 2011 pm31 18:47 |

        flac support is only in gps mode, so only stereo.
        player supports playlists.

  • m0nik0n
    m0nik0n
    02 December 2011 pm31 15:30 |

    I have a question: where to locate the 3g modem? If the modem is hidden in the glove-box, and receives GPRS/EDGE signal the speaker make characteristic "tidit, tedet" noise.

  • JMVS
    01 December 2011 pm31 18:18 |

    Hello Petrut,

    I'm very interested in your patches.
    I currently own a Eonon G1301 ( http://www.eonon.com/Car-GPS/1-Din-Car-GPS-DVD/G1301.html) which according to ResInfo is using the Nowada 4250 board.
    The system is WinCE 6 and seems to be in English (haven't seen any kind of dialog in Chinise). My mother language is Spanish.

    Now the questions:
    1) Is this device compatible?
    2) What would I need to buy from you to have the system as most as up-to-date as possible?
    3) I would like to perfom the USB-mod to have 3G Internet access and I would like to know if it would be a better idea to solder a powered usb hub (and taking power from the car battery) to plub more than 1 device?

    If there's any information missing let me know. You can see the full details of the unit on the Specifications page link.

    Thank you.

    • JMVS
      01 December 2011 pm31 20:48 |

      A few more questions:

      4) Will this USB-mod allow me to connect a TMC receiver and use it in iGO Primo?
      5) Same question goes for attaching a ODBII interface.

      Thank you.

      • Petrut
        Petrut
        01 December 2011 pm31 22:30 |

        4.no. you can use 3g and get online tmc.
        5.yes, but 3g will not work anymore if obd drivers are installed.

    • Petrut
      Petrut
      01 December 2011 pm31 20:47 |

      yes, this is perfectly compatible with my 3g patch.
      Just buy wince 6 patch, item 1 from wince 6 section, and 3g patch, and a huawei e1550 modem for 100% compatibility.
      And no, dont solder hub, just an extension cable.

      • JMVS
        01 December 2011 pm31 20:52 |

        Thank you for your reply. I just asked you a few more questions.

        If I solder just an extension cable, can I then attach a USB-hub to it?

        Thank you again.

        • Petrut
          Petrut
          01 December 2011 pm31 22:31 |

          yes

          • JMVS
            01 December 2011 pm31 22:54 |

            Thank you for all your answers.

            Here in Argentina I can get the 3G Modem Huawei E176 HSUPA USB Stick. Do you know if this model will work? Also, could you please explaing a little bit more about "online TMC"? I couldn't find anything on the Internet.

            Thank you very much.

            • Petrut
              Petrut
              02 December 2011 pm31 14:32 |

              should work, but i can`t guarantee that.
              online tmc is available in igo primo, if you have a tmc license.

  • tom
    tom
    30 November 2011 pm30 18:06 |

    i have all installed
    How can i autostart 3g connection and igo?

    • Petrut
      Petrut
      30 November 2011 pm30 20:01 |

      system tools app for 3g connection.
      igo must be added manually in desktop.mscr from program files/desktop, after the line with iphonetoday. If you know a little about computers you can do it.

  • Peter
    Peter
    30 November 2011 pm30 16:16 |

    Hello,
    I have a AS-7609 by Audiosources it is based on wince 6.0 Nowada 2450 board, I bought a patch for Nowada 2450 board, fallowed all instructions in read me file, First I applied the patch, thinking that i have a English WINCE but I was wrong i have Chinese so I fallowed the instruction to flash wince, that didnt work automatically ( nothing happened when i power off power on and went to navi screen, so i tried runing UPGRADE.EXE from navi screen, it went thru but then i applied the wincepatch pointed GPS to Desktop.exe and when i click on GPS i get an error in chinese it says something about DESKTOP.MRC please help

    • Petrut
      Petrut
      30 November 2011 pm30 20:00 |

      i hope you got wince 6 patch.
      just reinstall, dont use upgrade.
      Patch is tested and working on that unit.

      • Peter
        Peter
        30 November 2011 pm30 20:35 |

        Petrut

        You talking about WincePatch (wincepatch folder)right ? Will that give me English WinCE?

        • Petrut
          Petrut
          01 December 2011 pm31 20:48 |

          yes, 99% english

  • Stu
    Stu
    29 November 2011 pm30 20:49 |

    How can i restore system menu back to original state. I.E - desktop to e-book
    Many thanks

    • Petrut
      Petrut
      30 November 2011 pm30 19:59 |

      reflash or manually edit lang.msd from nwdflash/msd/app

  • Mare
    Mare
    29 November 2011 am30 01:13 |
    • Petrut
      Petrut
      29 November 2011 am30 09:10 |

      Yes, wince 6 section item 1.

  • Reaper
    Reaper
    28 November 2011 am30 04:32 |

    Hello Petrut, It has been a while since I have followed the info for the Dynavin I have a v2 or v3 Dynavin in my e46, what do I need to purchase to for the latest and greatest?

    Thanks

    • Petrut
      Petrut
      28 November 2011 am30 10:46 |

      Wincepatch and 3G or wifi :)

  • GBT
    GBT
    27 November 2011 am30 09:36 |

    Hi - I've just installed a nameless double din.

    Resinfo shows
    EONON
    AT8X0 6.0
    Windows Embedded CE 6.0.3122
    118 MB RAM
    ARM 1136JF-S AT840
    800x480 pixels, 65536 colors


    Program Memory
    16.4 used 96.2 free 113MB

    Storage Memory
    72KB used 5.15MB free 5.22MB

    Is this something I can buy a patch for ?

    thanks
    GT

    • Petrut
      Petrut
      27 November 2011 am30 11:39 |

      run cecmd.exe from tools folder and send me partitions list.

      • GBT
        GBT
        27 November 2011 pm30 21:40 |

        Hi mate,

        it shows

        \\Plugins
        Application Data
        NandFLASH
        Program Files
        ResidentFlash
        StorageCard
        Temp
        Windows
        chinese_characters.lnk

        • Petrut
          Petrut
          27 November 2011 pm30 23:04 |

          buy wince 6 patch, any of them.
          i`ll send you custom patch in 24 hours.

          • GBT
            GBT
            28 November 2011 am30 10:23 |

            Hi Petrut,

            I have just paypalled a patch - you should see a payment come through from gtilby@etc etc.....

            cheers
            GT

  • Txema Azkarate
    Txema Azkarate
    26 November 2011 pm30 19:33 |

    Hi, Petrut.
    I've installed Mort Player by .cab files in my DVD device, but it doesn't work. It appears an error window, but in chinesse. My question is, if I've already patched my device with your patch, can I reset it (point 1 in your README 1ST tutorial) to get it in english?

    Thank you. (Please, excuse me for my bad " english").

    • Petrut
      Petrut
      26 November 2011 pm30 20:02 |

      mort player doesnt work correctly on chinese devices. It needs .netcf 3.5. Even if you install it correctly will be slow and menus will not fit screen.
      Anyway english firmware links are in readme file when files are available and safe. If there are no links, no firmware, or not safe.

  • Adrian P
    Adrian P
    25 November 2011 am30 11:19 |

    Bad news!!!.
    This unit is compatible http://factory.dhgate.com/car-cd-player/special-car-dvd-for-ford-focus-fod-803gd-p37062009.html?, i need your patch because i want to get the 3g and WIFI and i have the change possibility.
    This unit came with WinCe 6.0 and have a mowada board. Sorry, no resinfo now, but if you need, i could get it...

    • Petrut
      Petrut
      25 November 2011 pm30 17:48 |

      yes, both 3g and wifi will work on it. But you need usb mod

  • wafer
    wafer
    25 November 2011 am30 00:44 |

    Hi Petrut,

    Before I buy your WinCE6 patch, I need to ask if the patch can enable my All-in-One in-car unit to read SDHC cards. This is the main reason I want to upgrade.

    Unit info as follows: -
    Nowada_2450
    NWD_2450 multi-platform 6.0
    Windows Embedded CE 6.0
    ARM1136JF-S AT840
    800x480 pixels 65536 color
    Program Memory - 110MB
    Storage Memory - 1.0MB
    NWDFlash - 1.98MB
    NandFlash - 54.7MB

    wafer

    • Petrut
      Petrut
      25 November 2011 am30 08:44 |

      any nowada 2450 wince 6 can read sdhc cards. You tried?

      • Wafer
        Wafer
        25 November 2011 pm30 14:08 |

        Hi Petrut,
        I've tried on the 2nd SD card slot which does not take SDHC cards. Let me try the GPS SD card slot & report back.
        Wafer

  • Txema Azkarate
    Txema Azkarate
    24 November 2011 pm30 22:40 |

    Hi, Petrut!
    I have installed your patch and it works perfectly in my car, but, when I shut down it, then I start engine again in a minutes, and DVD starts on original dispay, original firmware again, I must start desktop mode by clicking Navigator icon again. Is it normal? And sometimes, Mp3 player doesnt remember the last song that it played. Is this a standby problem or I did something wong?
    The navigation apps dont work.
    Thank you.

    • Petrut
      Petrut
      25 November 2011 am30 08:46 |

      yes is normal. the unit will always go in radio/dvd mode, and you have to switch to gps mode.
      I have no idea about the mp3 player, it should remember last song... try naviplayer not nitrogen.
      Also there is no navigation software in my patch, only icons, you must link them to your existing navigation software. read manual about how to do that.

      • Txema Azkarate
        Txema Azkarate
        25 November 2011 pm30 15:00 |

        Ok. Thank you for your answer. Another question, can I install another mp3 player, like Winamp?

        Thanks again.

  • Adrian P
    Adrian P
    24 November 2011 am30 11:29 |

    Hi Petrut!,
    some time ago I acquired the patch for mowada 2450 with Wince 5.0 and 480x234 res. Well, I change these device for this
    http://www.alibaba.com/product-gs/466876593/2011_new_model_car_dvd_players.html

    More pics
    http://img62.imageshack.us/img62/7619/osda.jpg
    http://img685.imageshack.us/img685/6835/radiof.jpg

    This is the Resinfo out:
    under System tab:
    BSP Version: AIVCE6_NANO_Rel1.04...
    Windows CE 6.00.3122
    115.3 MB RAM
    ARM1136JF-S AT840
    800x480 pix
    65536 colors

    Do you think your patch will be applicable in this unit ?

    If you need, I have a install image of this firmware/software.

    Thanks!
    Kind regards
    Adrian

    • Petrut
      Petrut
      24 November 2011 pm30 20:11 |

      i dont have a patch for this device, sorry

  • Andy
    Andy
    24 November 2011 am30 10:24 |

    Hi Petrut,

    Already installed a few times your programs and everything was fine, but now I have a problem with the radio: http://www.witson.com/en/displayproduct.html?proID=100903537

    Patch should work because it is Nowada 2450 wince 6.0 boards

    The radio is probably the Chinese wince.

    I did reflash as described but will not turn on automatically update

    See my photos:

    https://picasaweb.google.com/102847810706258851910/NewVw8Inch?authuser=0&feat=directlink

    Please help,
    Best regards,
    Andy

    • Petrut
      Petrut
      24 November 2011 pm30 20:13 |

      regular wince 6 patch should work fine.
      There is no firmware for this device in my packages, so don`t try to reflash it with internet found stuff...

  • Dave Toulson
    Dave Toulson
    23 November 2011 pm30 15:34 |

    Any news on the guide for accessing Live Traffic on Primo 1.2?

    • Petrut
      Petrut
      23 November 2011 pm30 22:24 |

      you need tmc license, get it legally or from internet, i can`t help with that. It should be in license folder from igo. Also write in sys.txt

      [tmc-http] enabled=1

  • Txema Azkarate
    Txema Azkarate
    22 November 2011 pm30 20:47 |

    Hello!
    I'm spanish, and I've got a Chinese DVD in my car. It's a Nowada 2450 with Windows CE 5.0, and I'm interested in your patch, but I have 2 questions:

    1- Will I can to use a MP3 player with equalizer? I'm interested in this, my firmware has a mp3 player with only bass and treble regulator.

    2- I play music from my SD card, and then I stop my car and take my key. When I start my car again the mp3 starts from the first song of SD always. Will your patch fix it? Will MP3 player start from where it stopped?

    Thank you very much, and please excuse me for my "English".

    • Petrut
      Petrut
      23 November 2011 am30 11:57 |

      yes to both questions.
      BUT, this will work ONLY when system is in gps/desktop mode.
      So will play only mp3 from gps sd card, using the software provided. Existing built-in software will always be the same.

      • Txema Azkarate
        Txema Azkarate
        23 November 2011 pm30 13:52 |

        You want to say that I cant install a new mp3 player with equalizer? I like "Nitrogen" from MioPocket.

        • Petrut
          Petrut
          23 November 2011 pm30 22:25 |

          you can, i also have nitrogen and others, i just say you will use them in gps mode not main dvd mode.

  • DREAMERARGENTINO
    DREAMERARGENTINO
    22 November 2011 pm30 16:03 |

    Hello Petrut!

    A query:

    Any idea how I can change the boot logo WITSON W2-745P

    Thanks!

    • Petrut
      Petrut
      23 November 2011 am30 11:58 |

      not possible using my tools. You need original firmware from manufacturer.

  • silvije
    silvije
    22 November 2011 pm30 13:58 |

    Hello there!
    very interesting site!
    I have a chinavision multimedia player http://www.chinavasion.com/product_info.php/pName/king-cobra-7-inch-hd-touch-car-dvd-player-wifi-gps-dvbt/
    to
    and it doesn't want reboot. as you see it runs on win ce 5.0 with samsung 2440 processor. is it possible that you write (or alreday have) a patch??
    thank you very much

    • Petrut
      Petrut
      23 November 2011 am30 11:59 |

      no, will not help, sorry. That model is not compatible with my patches.

      • silvije
        silvije
        23 November 2011 pm30 13:51 |

        Oh, is it possible to write it? or Is it possible to install some other software based on win ce 5.0 platform

        • petrutms
          petrutms
          23 November 2011 pm30 22:32 |

          yes, any software you can find on internet.

          • silvije
            silvije
            25 November 2011 pm30 12:08 |

            ok..my device has Fm radio, dvb-t TV, gps, bluetooth. Do you have any suggestion for the software which can control that?
            in the meantime, after 5 emails manufacturer send me new firmware. I try to boot my system with this new firmware via my SD card. Nothing happened. System is still booting from the windows root. How can I avoid that. Thanks

  • Charalambos Constantinou
    21 November 2011 am30 11:40 |

    Hello,

    I recently bought (last night) the wince patch 6.0 for AS7608 v4.2 and installed it with no problems. The only problem is that i cannot find out how to enable onscreen keyboard in wince. Can you help me ?

    • Petrut
      Petrut
      21 November 2011 pm30 15:13 |

      make sure you have the screen calibrated. In desktop mode, in bottom right corner there is the keyboard icon. Also set taskbar always on top if you want to use keyboard in office apps.
      Also keyboard will automatically popup when needed.

      • Petrut
        Petrut
        21 November 2011 pm30 21:36 |

        calibrate screen with a pen. then you can close all apps.
        about keyboard, you mean you can select eurokeyboard, cekeyboard, etc, but doesnt appear?

        • Petrut
          Petrut
          23 November 2011 am30 11:59 |

          strange. never had issues. I`ll try to find a solution for your device.

          • Charalambos Constantinou
            23 November 2011 pm30 14:35 |

            Thanks. What about reinstalling your patch ?

            • petrutms
              petrutms
              23 November 2011 pm30 22:33 |

              try that too :)

              • Charalambos Charalambos
                24 November 2011 pm30 16:25 |

                I tried reinstalling. It does not work. Everything works ok except that keyboard does not show! any other suggestions?

                • Petrut
                  Petrut
                  24 November 2011 pm30 20:17 |

                  i have no idea.
                  i`ll investigate the issue.
                  Until then, you can try to reflash if you have the firmware, go to original wincepatch folder, delete eurokeyboard.reg from msd/app/registry/custom and startkey.exe from msd/app and install again using this modified wincepatch folder.

  • BullOfOz
    BullOfOz
    20 November 2011 am30 06:09 |

    Hi Petrut,

    1) Do you know if your patch will work with any of the Rosen head unit?
    2) And if yes, do you know if USB mod and Wifi will work?

    Thanks

    • Petrut
      Petrut
      20 November 2011 pm30 12:26 |

      i know nothing about Rosen. Give me more info.

  • Maurice
    Maurice
    19 November 2011 pm30 13:46 |

    Hey Petrut,

    I tried to find out which version is running on my unit, but I can't find "System Information" anywhere. There's a settings button at the top right of my screen in Radio or SD mode, but it only shows a few tabs: ASP/Video/General/Radio/SD/etc. In the tutorial section you mention "the main menu of the GPS board". How do I get there?

    I do have a main menu with 10 buttons as you can see in the image above. Though, the settings button at the top right takes me to the same settings menu as Radio/SD mode.

    Unit setup:
    http://imageshack.us/f/526/mcd901setup25.jpg

    Nav main menu:
    http://imageshack.us/f/12/mcd901nav25.jpg

    • Petrut
      Petrut
      19 November 2011 pm30 21:13 |

      just exit the igo program :)
      then you`ll see the REAL navigation board menu and run the tools as instructed.

  • rmvdmrl
    rmvdmrl
    17 November 2011 pm30 22:38 |

    Hi Petrut,

    Perhaps a strange question but i have a roadrover headunit and am trying to get WIFI working. It runs on CE6 has USB ports and i have a RT3070 Wifi USB stick. When i plug it in de unit asks for the driver. I also installed the Ralink 2870 drivers. When i give the path to the RT2870.dll the unit does not accept it. Will your Wifi Pach solve this?

    Rm

    • Petrut
      Petrut
      19 November 2011 am30 06:07 |

      I dont have a patch for rover units. But should fix it of the USB adaptor is compatible

  • Djuby
    Djuby
    17 November 2011 am30 10:16 |

    Hi,

    Does the WinCE patch contain an FM radio application?

    • Petrut
      Petrut
      17 November 2011 pm30 17:58 |

      no

  • BullOfOz
    BullOfOz
    17 November 2011 am30 04:33 |

    Hi Petrut,

    thanks for sending the custom version!

    The patch installed correctly (I think) except for the *illegal software* message after the reboot at the end. Not sure if there was any damage but I was able anyway to launch IPhone and most of the apps seem to work. Really nice!
    From some app, I'm able (sometimes) to access the desktop and the task bar. So I'm really happy for all that.

    3 questions:
    1) Could not see the keyboard anywhere.. Is it gone because of Flyaudio?

    You mentionned earlier Internet drivers not compatible with this unit...
    2) Still, does the USB mod will create a usable USBHD in WinCE?

    3) What would be required to make the Wifi works on this unit? (in theory at least)

    Thanks for your amazing work and support!

    • Petrut
      Petrut
      17 November 2011 pm30 17:57 |

      1.yes
      2.no
      3.not possible even in theory.

  • Igor
    Igor
    15 November 2011 am30 09:59 |

    Hi, Petrut.
    I've installed wincepatch on XTRONS td717g. Evrth is fine, except taskbar on desktop. It's always hidden!!!
    I tried to resolve this problem by editing file "registry.reg" from winpatch distributive.
    In line:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Ontop]
    @=dword:00000000

    I replaced 0->1, and then install patch again on clear system. Hasn't helped.
    How to correct?

    Regards
    Igor

    • Petrut
      Petrut
      15 November 2011 pm30 21:45 |

      i think your unit wince core files doesnt have taskbar support. Even if my explorer.exe have it, if there is no support in firmware, you can`t enable it. Same think with keyboard, i found crap units ( flyaudio ) with no keyboard support at all.

  • Vincenzo
    Vincenzo
    12 November 2011 pm30 19:35 |

    Ok...
    dear Petrut,please...
    now I have to solve the last problem:
    When I open a file with an mp3 player ... I hear the sound from small speakers of the device....
    instead of the original software from Audio DYNAVIN you hear the stereo AUX ...
    how do I route the sound of any player (like Core Player) to the car stereo's AUX ... ?
    Please, just this ... help me!

    • Petrut
      Petrut
      12 November 2011 pm30 19:45 |

      i never had a unit like yours so i can`t help you. Maybe there are some setting on the unit, i don`t know..

  • Vincenzo
    Vincenzo
    12 November 2011 am30 05:54 |

    I ask, please, if there is a method to read this h264 compressed video in the original player (DVN-E83) ... I might add codecs ?!
    Please...

    • Petrut
      Petrut
      12 November 2011 pm30 17:38 |

      not possible

  • BullOfOz
    BullOfOz
    12 November 2011 am30 02:59 |

    Hello Petrut,

    Really awesome work you did!
    I hope I can install it on my Flyaudio E7572NAVI (for Prius)!

    Resinfo results:
    FLYAUDIO VERSION: 10.07.18
    FLYAUDIO 6.0
    Windows Embedded CE 6.0
    119 MB RAM
    ARM1136JF-S AT840
    800x480 pixels, 65536 colors

    1) Is your patch compatible?
    2) Is it reversible?
    3) For Wifi, do I need to do the hardware usb mod?

    Again, outstanding and fantastic work!

    • Petrut
      Petrut
      12 November 2011 pm30 17:39 |

      internet pacthes not compatible with flyaudio, sorry.
      also desktop doesnt work, only iphone menu. i can make a custom one if you want.

      • BullOfOz
        BullOfOz
        12 November 2011 pm30 18:25 |

        Yes please. Let's do that.
        What other info do you need from me to make the custom?

        • BullOfOz
          BullOfOz
          12 November 2011 pm30 19:06 |

          Oh I guess what you need is this:
          (from WR-Tools ResInfo) Storage
          ResidentFlash: 1.65MB
          282 KB used 1.38MB free
          SDMEM: 7.51GB
          10.1 MB used 7.5 GB free

          anything else you need?

          • Petrut
            Petrut
            12 November 2011 pm30 19:13 |

            no. just buy any patch from my site. I can send your custom one only on Wednesday, i`m out of country until then, business.

            • BullOfOz
              BullOfOz
              12 November 2011 pm30 21:11 |

              OK Done.
              Waiting for your custom one.
              Many thanks!

  • Pelado
    Pelado
    11 November 2011 pm30 22:04 |

    Hello,
    I have installed W2-D762CI witson in Citroen C4, with Win CE 5.0, the patch serves this model?
    In such a case that offers benefits to install it?
    Thank you.

    • Petrut
      Petrut
      12 November 2011 am30 00:20 |

      not compatible with your unit.

  • Vincenzo
    Vincenzo
    11 November 2011 pm30 21:49 |

    Dear Sir Petrutms,

    I am very interested in your patch ... I have a device DVN-E83 for BMW X3.
    I want to know any questions, please:
    1) with certainty, I can install it on my device?
    2) my device has WINCE 5.0 or WINCE 6.0 ???
    3) now my wince is in Chinese, I can change it to English?
    4) after I install your patch, if I want, I can return to the original, as before the change ?!
    4) My main problem is read the files video (via USB) compressed with h264.
    With your pach are you sure I can read and hear the audio through the AUX input of my car stereo (now with CORE PLAYER I hear only through the small speaker DVN-E83!) ?!

    Thanks for your kind answers.

    • Petrut
      Petrut
      12 November 2011 am30 00:19 |

      not compatible at all with your unit, sorry.

    • Petrut
      Petrut
      11 November 2011 pm30 19:23 |

      Yes, will work perfect. Get nowada 2450 patch for it, wince 5 or 6, I don't know the version on your unit

      • Maurice
        Maurice
        12 November 2011 am30 10:25 |

        I just tried to find out which version is running on my unit, but I can't find "System Information" anywhere. There's a settings button at the top right of my screen in Radio or SD mode, but it only shows a few tabs: ASP/Video/General/Radio/SD/etc. In the tutorial section you mention "the main menu of the GPS board". How do I get there?

        I do have a main menu with 10 buttons as you can see in the image above. Though, the settings button at the top right takes me to the same settings menu as Radio/SD mode.

        Unit setup:
        imageshack.us/f/526/mcd901setup25.jpg

        Nav main menu:
        http://imageshack.us/f/12/mcd901nav25.jpg

      • Maurice
        Maurice
        11 November 2011 pm30 22:36 |

        Good news! I'll check my unit version tomorrow. :-)

  • Ace
    Ace
    10 November 2011 pm30 23:12 |

    Hello Petrut, congratulations for the Patch.

    Is it work with Witson w2-d745p ? Can i use the internet function from my smartphone ?

    Another and important (for me) question, the device is installed on my Peugeot 307 and i lost the access to the cars computer (adjusting time, etc), i know that there is a newer firmware that corrects this problem, giving access to the computer from de SRC button (pressing and holdingo on the wheel control), do you have this firmware or can recommend me someone who has it ?? Thanks a lot !

    • Petrut
      Petrut
      11 November 2011 pm30 13:00 |

      you need usb mod for internet.
      i can`t help you with your other issue, sorry.

  • Sandrea
    Sandrea
    10 November 2011 am30 10:55 |

    Hello, Petrut!
    I have a question.

    My sistem:
    Nowada_2450
    NWD_2450multi-platform 6.0
    Windows Embedded CE 6.0
    111 MB RAM
    ARM1136JF-S AT840
    800x400 pixels, 65536 colors

    I used the device with version 7.8 (upgrade not to make). Step 1 "reflash" i did as is written in "readme", but the system automatically wasn't updated. Therefore has passed to a step 2. After installation WINCEPATCH at start there is an error:

    "EndForEach" without "ForEach"
    Line 26 (\NwdFlash\$MSD$\App\memoryadjust/mscr):
    EndForEach

    It can occurs because of overflow NandFlash? (info from "Tools ResInfo":
    NandFlash 1,82 MB
    1,82 MB used 0 kb free)

    Sorry for my english.
    Thanks!

    • Petrut
      Petrut
      10 November 2011 pm30 16:34 |

      please login to your account and download 8.3 wince 6.
      this bug is fixed for most systems in the latest version.

  • DreamerArgentino
    DreamerArgentino
    09 November 2011 pm30 17:37 |

    Hello!

    I have the same problem as described another user on another forum:

    I have a Chinese all-in-one Witson W2-D745P car GPS.

    I have run MIOPocket 4.0 setup, but it got stuck to : "Attempting to reboot device".

    I then powered off & on the device, and the result is that the gps menu loads forever & nothing happens. (All other functions work: radio, tv, dvd)

    - And the bad thing is that I am not able to access file manager or something similar to repair the registry. I' m guessing it's the registry MIO changes that did the damage.
    These devices actually store all registry changes but don't change anything in Win or other folders.


    I have the same problem as described another user on another forum that has posted here:

    http://goo.gl/MXRZR

    Please, help me!!!

    Thanks,

    DreamerArgentino

    • Petrut
      Petrut
      10 November 2011 pm30 16:31 |

      yes, my patch can fix it.
      please get item 1 from wince 6 section, then send me email and ask for firmware.

      • DreamerArgentino
        DreamerArgentino
        10 November 2011 pm30 17:03 |

        Hello Petrut, thanks for replying

        Another question: But how to install the FIX would you mention? Since, I have no access via browser setup for the problem above.

        Thank you!

        DreamerArgentino

        • Petrut
          Petrut
          10 November 2011 pm30 17:42 |

          the firmware update is autostarting at boot.

          • DreamerArgentino
            DreamerArgentino
            10 November 2011 pm30 18:00 |

            Petrut, sorry for my English ...

            Before buying, I would understand if I am going to work in my situation ...

            What I'm saying is that the PNA has clearly lost access via SD-card ... So where or how to install the patch??

            Thank you again!

            DreamerArgentino .-

            • Petrut
              Petrut
              10 November 2011 pm30 18:26 |

              trust me, will work ! If not, i`ll refund you !

              • DreamerArgentino
                DreamerArgentino
                11 November 2011 am30 03:30 |

                It worked wonders!! You're a genius!!!! Thankss!!

  • senni55
    senni55
    07 November 2011 am30 09:27 |

    hi petrut,

    i bought eonon device in the link http://www.shopmania.co.uk/audio-video-equipment/p-eonon-d5103-special-car-dvd-for-opel-astra-14427724

    1-what patch exactly should i use?

    2-this device comes with usb and ipod cable that i extended in the car drawer.. will this usb and ipod cable still be working ??. i mean when installing the patch will the wince still see those connections??

    3-what exactly do i have to do to get internet after installing the patch??

    • senni55
      senni55
      07 November 2011 am30 09:47 |

      another question please

      4- is there a video on how to open the device and install the usb wifi thing??

      • Petrut
        Petrut
        07 November 2011 am30 10:08 |

        1. you need item 1 from wince 6 section.
        2. patch will work only in gps mode, will not affect any of the other menus/systems.
        3. you need to buy wifi patch, a wifi adaptor ( edimax 7711 series ), and solder a usb cable to gps board. There are details about usb mod in tutorials section.

        • senni55
          senni55
          07 November 2011 am30 11:38 |

          petrut please ,

          will i see the usb memory flach drive when conected to the original usb cable from inside wince after patch in item 1 ??
          memory flash drive is 16 gb

          • Petrut
            Petrut
            07 November 2011 pm30 14:01 |

            NO. you need usb mod.

  • m0nikon
    m0nikon
    05 November 2011 pm30 22:47 |

    Petrut did you find time for adapting registry for my modem with newer firmware?

    • Petrut
      Petrut
      06 November 2011 am30 11:23 |

      Yes, I'll send you a test version tomorrow.

      • m0nikon
        m0nikon
        06 November 2011 pm30 13:17 |

        OK, I can't wait ;-)

  • Lody
    Lody
    03 November 2011 pm30 15:10 |

    Hi,

    I have a question. In my system (SMDK2450, WinCE5), the "StorageCard" is called "Storage Card" (with space). This means the script will not run. I started Windows Commander, however, I am not able to change the name of the Storage Card to StorageCard (because the lack of a keyboard). Running desktop.exe is not possible (system freezes).

    Can you help please (it's a witson system (W2-D762CI).

    Thanks!

    • Petrut
      Petrut
      03 November 2011 pm30 21:46 |

      tell me all partitions names in total commander. I can make a custom patch.

      • Lody
        Lody
        04 November 2011 am30 10:18 |

        Hi Petrut,

        That would be great!
        These are my partitions:

        |APP
        |
        |Data
        |--> F_ini
        |
        |FlashDisk
        |--> $MSD$
        |--> Desktop
        |--> FBOOT
        |--> Froot
        |--> Programs
        |--> Windows
        |
        |Storage Card

        • petrutms
          petrutms
          05 November 2011 pm30 18:29 |

          check mail.

          • Lody
            Lody
            10 November 2011 pm30 20:37 |

            The wincepatch does not work for:
            Witson W2-D762CI.
            I have given it up... Iphone today works fine, but all other apps crash. I think Witson has made a trick in the OS to stop us from hacking it :)
            Thanks for your help though. May something clever pop up in your mind to get my system going, please send me a message.

            Greets!

  • Harker
    Harker
    01 November 2011 pm30 12:25 |

    Hi,

    I have just bought our WINCE patch. Congrats on a great soft.

    I have a couple of questions:

    I was looking forward to resolve the igo bluetooth integration problem. I saw on golfmkv forum that it was resolved in this patch.
    However i still can´t make igo go to phone app when somebody is calling. When igo is running, i miss all my incoming calls. Can it be fixed?
    This is my main problem, that drove me to buy your patch.

    Total commander explorer does not see my media sd card. Therefore i cannot select mp3 files in your mp3 player. Or create a playlist. How can i make your software detect my sd media card?

    Here are my specs:

    Bsp version: aivce6evb_rel1.00.5.02
    AT8X0 6.0
    Windows embedded ce 6.0
    117 mb ram
    ARM1136JF-S AT840

    Best regards,

    • Petrut
      Petrut
      01 November 2011 pm30 19:30 |

      about your igo issue, that depends by the main firmware, not the gps board. really strange, i never heard of such problems. The unit usually switch to bluetooth when you have an incoming call.
      Also the patch can see ONLY gps sd card, and usb conencted to gps board ( usb mod or built-in on dynavin ).

  • ramli
    ramli
    31 October 2011 pm31 16:10 |

    mr petrut,

    i had purchase your wince patch. i want to use elm327 base USB cable. It use ftdi serial driver. I try to use the driver inside Program Files but when i plug in the ftdi serial to usb, it keep on asking driver name. I'm using maisun mt-6501 window ce 5.0, thank you

    • Petrut
      Petrut
      31 October 2011 pm31 21:50 |

      ftdi driver is not yet supported for wincepatch on wince 5.
      it will be available soon. If you have the driver, just add it in storage card/program files/windows, and the regsitry for it in nwdflash/msd/app/registry/custom.

  • Manny
    Manny
    25 October 2011 pm31 15:27 |

    Will your patch solve my issue? GPS software will not load, just keeps resetting. I have a Maisun wd6050 was working fine until a few months ago, starting freezing up saying out of memory, now won´t load at all. Everything else on the GPS side of the unit seems to be working. Thanks.

    • Petrut
      Petrut
      25 October 2011 pm31 18:34 |

      sounds like a gps software issue. Just use another newer release of your gps software.

  • m0nik0n
    m0nik0n
    24 October 2011 pm31 19:02 |

    How many transfer uses gps tracking system, for example, for an hour's drive?

    • Petrut
      Petrut
      25 October 2011 am31 05:11 |

      every 15 or 30 seconds, depends how you configure it.
      for 1 day with 4-5 hours of driving, will take about 2 mb of data.

  • Harald
    Harald
    23 October 2011 pm31 13:11 |

    Hi
    My Problem is the installation from Wince patch/ EXE . If I put the Buttom to Install, than it comes the Windows for INTSTALL NEW or UPGRADE. Nothing is going on, but it becomes a new window with the note--- files are missing, please read- readme.doc. And now the question..... where I find the readme. doc.... or..... what can I do? The download was correctly from wince patch, but the Dynavin 4.V , Motherboard Mesada 2440, in my car, does not find any files and cant loading anything by new install.

    Can you help me
    Harald
    Many Thanks

    • Petrut
      Petrut
      23 October 2011 pm31 17:32 |

      the readme file is in the archive with the files. Is the main instructions file. Read it carefully and you`ll fix the data missing error.

  • Dave Toulson
    Dave Toulson
    23 October 2011 am31 09:53 |

    Hi Petrut. You mentioned uploading a guide for accessing Live Traffic on Primo 1.2 on 12th October. Where can I access it?

    • petrutms
      petrutms
      23 October 2011 pm31 17:33 |

      not ready, sorry. Will be posted on main page when ready.

      • Dave Toulson
        Dave Toulson
        19 November 2011 pm30 17:05 |

        Any news on this Petrut?

  • Mlkfahl
    Mlkfahl
    22 October 2011 pm31 23:48 |

    I have same device as Rudysan, Folders:

    GPSData
    NFlash
    SDMMC
    ( + Regular Windows CE 6 Folders and one Chinese named folder)

    BSP Version: AIVCE6EVB_Rel1.00.5.02
    AT8X0 6.0
    Windows Embedded Ce 6.0
    117MB Ram
    ARM1136JF-S AT840
    800x480

    Can you make this WinCE6 English and provide new front end? Thanks!

    • petrutms
      petrutms
      23 October 2011 pm31 17:35 |

      yes. Buy any wince 6 patch and send to my email a request for custom patch.

      • Mlkfahl
        Mlkfahl
        24 October 2011 am31 02:21 |

        ok, now will this patch allow me to change the time on my unit from 24 hour clock to 12 hour clock?

        • Petrut
          Petrut
          24 October 2011 am31 06:08 |

          It will allow you to access control panel like on any pc, so i think yes.

  • jade
    jade
    22 October 2011 pm31 23:41 |

    hi,

    I have a erisin unit, i bought your wince 6 patch for it
    and i get this error when installing:
    Couldnt create directory'\ResidentFlash\$MSD$'

    Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
    MkDir("\ResidentFlash\$MSD$$")

    BSP Version: AIVCE6_NANO_Rel1.03...
    AT8X0 6.0
    Windows Embedded CE 6.0.3122
    118 MB RAM
    ARM1136JF-S AT840
    800*480 pixels, 65536 colors

    please could you tell me if i need a custom patch or is there something i can do to rectify this problem, thanks

    • jade
      jade
      23 October 2011 am31 00:11 |

      sorry i entered the wrong proplem my proplem is

      Couldnt create directory'\NWDFlash\$MSD$'

      Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
      MkDir("\NWDFlash\$MSD$$")

      • petrutms
        petrutms
        23 October 2011 pm31 17:34 |

        run total commander and tell partitions names. You need custom patch. EMAIL me the results.

  • Mak
    Mak
    21 October 2011 pm31 21:31 |

    hi Petrut
    Please can you idetift my system

    data is
    BSP version : AIVCE6EVB_Rel1.00.5.09
    AT8X0 6.0
    windows embedded CE 6.0
    118 MB RAM
    ARM1136JF-S AT840
    800X480 Pixels 65536 colors

    also is it possible to get reflash package for this one

    best regards
    Mak

    • Rudysan
      Rudysan
      22 October 2011 am31 06:06 |

      Hy Petrut I bougth a Chinese Multimedia Unit 7"Crown G-9971, runs on Windiows CE 6.0 800*480, which patch I have to buy?

      • Petrut
        Petrut
        22 October 2011 pm31 17:53 |

        there is no firmware for reflash for this board.
        patch can be custom made if you send me total commander partitions list.

  • Alex Blokker
    Alex Blokker
    20 October 2011 pm31 13:38 |

    Mr. Petrut, I did tried out your last suggestion (just touch the \StorageCard\NWDSoftware tekst), but it don't go away. The software I use, do like accently as: wince 5, Nowada 2440 boards, 480x234. If I go to next step, it says: \Device, but still no "Root". May I ask you to please advise?

    • Petrut
      Petrut
      20 October 2011 pm31 15:59 |

      i have no idea what is wrong or what you did to get that error. You can try to reflash on your own risk.

      • Alex Blokker
        Alex Blokker
        20 October 2011 pm31 20:05 |

        Mr. Petrut, how do I reflash? Do you have a program to reflash it with? Do you maybe another program that I can Use? Please advise if you will. Kind regards.

        • Petrut
          Petrut
          20 October 2011 pm31 20:25 |

          http://www.mediafire.com/?mwzotnttyzy
          try on your own risk.
          instructions everywhere in my threads on golfforums or internet.

          • Alex Blokker
            Alex Blokker
            21 October 2011 am31 11:41 |

            Mr Petrut, I did look for several hours on internet, also on golfmkv.com, but I can't find the threads to reflash. I put the files on a 256 Mb SD-card, but can you please tell me how to start the card/ the software. Kind regards, Alex Blokker

            • Alex Blokker
              Alex Blokker
              21 October 2011 am31 11:53 |

              Mr. Petru, does the SD-card need to have a specific name?

              • Petrut
                Petrut
                21 October 2011 pm31 13:19 |

                extract all files in root of sd ( autoupdate folder and nwdtcali.exe), insert in gps slot, power on, switch to navi, wait to update. if update doesnt start try again. if still doesnt work, nothing i can do. Remove sd after a successful flash.

  • Chris
    Chris
    19 October 2011 pm31 18:48 |

    Is you product available for the Zenec NC2010. I notice with their V10 WinCE 6 firmware they have bootloader access through the SD_Card with the following files.

    Bootc8.nb0
    Logoc8.JPG
    Nkc8.nb0

    After booting from the SD card it then updates the OS, application etc from files on the USB stick.

    • Petrut
      Petrut
      19 October 2011 pm31 19:45 |

      Not working on zenec. Tried and doesnt work

  • Arien
    Arien
    19 October 2011 pm31 16:42 |

    Hello Petrut,

    Are still busy making Windows CE desktops became available?

    I buyed a hack from you fot the TID7501 but now I have another radio.
    Can you still help me with this WinCe 6.0 model?

    http://www.lightinthebox.com/Car-PC---DVD-Player---Surf-Wifi-3G-Internet---7-Inch-Motorized-Touchscreen---GPS---Support-iPod---DVB-T-SZC6342-_p178905.html

    another picture
    http://www.aliexpress.com/product-fm-img/457065180-Car-PC-DVD-Player-Surf-Wifi-3G-Internet-7-Inch-Motorized-Touchscreen-GPS-Support-iPod-DTV-wholesalers.html

    Hope to hear from you a.s.a.p.

    regards,
    Arien

    • Petrut
      Petrut
      19 October 2011 pm31 18:19 |

      patch is not working on this model.
      Eventually i can make a custom one but only with iphone menu, not desktop mode. All other features of patch should work fine.

      • Arien
        Arien
        20 October 2011 pm31 20:11 |

        I have edited your patch, and now its working :)
        If you want, I can send you a copy.

        Can you help me to enable a hardware keyboard?
        I guess I need keboard drivers for WinCe 6.0

        regards,
        Arien (BockyWocky)

        • Petrut
          Petrut
          20 October 2011 pm31 20:23 |

          sure, send it.
          8.3 patch contains drivers for keyboard, but not all keyboards will work. try simple ones...

          • Arien
            Arien
            20 October 2011 pm31 21:34 |

            I send your the edited patch by email, please check.

            kbdmouse.dll is already registered in HKLM\Hardware\Devicemap\Keybd\
            I’ve tested 2 types, there is a sound reaction when a hit a key, but I cannot type.

  • Davide
    Davide
    17 October 2011 pm31 20:11 |

    Hi, I need help.
    When I push NAVI button on my Mesada 2440 board 480x234 WinCE 5.0 (WinCEhack 8.0) an error message appears ("MSKBoot create file failed"). If I close window, there's a new window Sysupdater, I can use touchscreen and navigate on gps sd card folders but I don't see executable files. If I close Sysupdater I see a blue blank screen.

    Could you help me?

    • Petrut
      Petrut
      19 October 2011 pm31 14:28 |

      you probably did something wrong with internal files and corrupted internal memory. You need to reflash. Or try to long press on that blue screen and tell me if a menu appears. Usually that screen is the default locked nowada desktop.

    • Petrut
      Petrut
      18 October 2011 am31 11:23 |

      system got corrupted somehow, you need to reflash.
      usually the patch for that board comes with firmware. If you dont have it, email me.

  • marinescu
    marinescu
    17 October 2011 pm31 17:04 |

    Salut. Stii cumva daca modemul Huavei E1752 este compatibil? Ca sa nu-l campar degeaba... Mersi

    • petrutms
      petrutms
      18 October 2011 am31 11:25 |

      da, este

  • lucas
    lucas
    16 October 2011 pm31 23:51 |

    sory petrut, im annoying again, what site sells the GPS board??? nowada no responses , mesada no responses, , ebay , deal extreme doesnt exists this board... again , excuse me for the english . greets

  • Paul
    Paul
    16 October 2011 pm31 21:40 |

    Okay it's me again. Now I've got a bigger problem. I did'nt get any gps signal after the WinCE Patch. Perhaps 1 but after some second it freeze. Is the patch changing anything of the gps???

    • petrutms
      petrutms
      18 October 2011 am31 11:26 |

      nothing to do with gps...

  • Alex Blokker
    Alex Blokker
    16 October 2011 pm31 12:12 |

    Dear Sir, i do have a "Chinese Unit" with no GPS "Root" anymore. This happend after a (long) use of the reset knob. There some tekst that says: /StorageCard/NWDSoftware.exe. Do you know a way how to restore this? The GPS processsor is a Samsung High performance processor ARM920T.

    With the most kind regards,

    Alex Blokker

    • petrutms
      petrutms
      18 October 2011 am31 11:27 |

      is normal, just press on it and will go away. then set back gps path.

      • Alex Blokker
        Alex Blokker
        19 October 2011 am31 10:04 |

        Mr. Petrut,

        I do try your suggestion, but it wont work. The tekst will not go away. If I go to the next step, there is in the upper left corner the following: \Device, but no "Root"or folder present.
        Kind regards,
        Alex Blokker

  • Paul
    Paul
    15 October 2011 pm31 18:02 |

    Hallo,
    I bought just today the Wince patch for Nowada 2450 WINCE 6 - 800x480. The installation is quite easy, well done. But I have a big problem: I don't get any sound out of my speakers. I have a VW7086 with the newest firmware. What can I do??

    • Paul
      Paul
      16 October 2011 am31 10:49 |

      Okay, now it's working. It was the problem with the code of the mp3 files in the WinCE menu. Thx anyway :)

  • Zigge Lindqvist
    Zigge Lindqvist
    15 October 2011 pm31 17:19 |

    Bought the patch CE6 today, all ok. Only thing i wonder about is upper list in the iphone menu. Can't you make the round circles for gps, media and so on larger. Almost impossible to hit them right.

    • petrutms
      petrutms
      18 October 2011 am31 11:28 |

      not possible. But please calibrate screen, will help alot.

      • Zigge L
        Zigge L
        18 October 2011 pm31 13:56 |

        It is calibrated several times, but the problem is still the size of the circles not the calibration.

  • mihai
    mihai
    13 October 2011 pm31 16:20 |

    Hello. I bought a car multimedia device: http://www.alibaba.com/product-gs/347365455/AL_8007_1_DIN_Car_DVD.html
    It based on Nowada 2450 platform, WinCE 6.0. I have a ZTE MF100 3g modem. Can I connect it with my car device? Thanks

    • Petrut
      Petrut
      13 October 2011 pm31 20:12 |

      zte modems will not work. But you can connect a supported modem if you add the usb port and use my patches.

      • mihai
        mihai
        14 October 2011 pm31 20:50 |

        Do you have a list with supported modems? And about USB, the device has already usb. Or not? Is a mini-usb in front of device and read memory stick.

  • Paul Sagar
    13 October 2011 pm31 13:06 |

    Hi Petrut, I installed wr-tools resinfo. wince now useable. ITaskmgr not working. MTK apollo 5.0, 118m ram, arm1176jz-s
    mt3351 (468MHz), 800x480. Do you have a patch for me?

    • Petrut
      Petrut
      13 October 2011 pm31 20:13 |

      no, sorry.
      maybe a custom one will work, run total commander and tell me partitions names.

  • lucas
    lucas
    13 October 2011 am31 02:04 |

    Hi petrut, im very interested on your patch.. good job making it!, please excuse me for my english, but i have a problem just now with the gps ..
    trying to change the wince to english , i stucked at sysupdater screen, with no screen responce , BUT, i weld an usb to the wince side (exactly explained on your excellent tutorial), when i can handle the sysupdate screen with a keyboard, i choose a wrong file... im an id*ot, now , when i enter the navi, wince just keeps with a bar , charging... i tried everyting but no responce... any solution please? good bye i wait your answer mate! :)

    • Petrut
      Petrut
      13 October 2011 am31 09:42 |

      try again to reflash. there is no other solution. If the bootloader is corrupt, the board can`t be recovered.
      What unit you have?

      • lucas
        lucas
        14 October 2011 am31 02:06 |

        thats the problem, i think the bootloader is dead :(, i cant acces to sysupdater...
        y have a mesada 2440 (nowada n607) gps board.. and the unit is a VTH .. any ideas? :(

        • Petrut
          Petrut
          14 October 2011 am31 05:46 |

          a new board... sorry.

          • lucas
            lucas
            14 October 2011 pm31 15:36 |

            VERY thanks for your answer pal , greets

  • Dave Toulson
    Dave Toulson
    12 October 2011 am31 10:28 |

    Hi Petrut. Did you have any luck tracing people who have online traffic working in Primo 1.2?

    • Petrut
      Petrut
      12 October 2011 pm31 17:44 |

      yes. i`ll upload a guide tomorrow or friday.

      • Dave Toulson
        Dave Toulson
        22 October 2011 pm31 20:36 |

        Hi Petrut. Did you upload the guide? Where can I access it?

  • Petr
    Petr
    10 October 2011 am31 09:41 |

    Hello Petrut, please contact to me ASAP

    • Petrut
      Petrut
      10 October 2011 pm31 14:34 |

      you email me :)
      my adress is in login section...bottom of page

      • bazzle
        bazzle
        10 October 2011 pm31 22:35 |

        Hi Petrut
        Which player will play mp4 please..

        Bazzle

  • Garett
    Garett
    09 October 2011 pm31 18:11 |

    I wanted to know which version i should use
    info is as follows
    RIZETECH
    RT GPS
    Windows CE 5.0
    39.1 MB RAM
    ARM ARM920
    480X272 pixels, 65536 colors

    Storage
    NandFlash 27.0 MB
    SDMMC

    plus is their a way to back up the current software incase anything happens

    • Petrut
      Petrut
      10 October 2011 pm31 14:32 |

      patch not compatible with your board, sorry. I can do a custom version but iphone menu cant be used, you have only 39 mb ram.

  • m0nik0n
    m0nik0n
    09 October 2011 am31 09:34 |

    Answer from the dynavin.freeforums.org:

    "Just choose AUX in the main menu (assuming you don't have the AUX connected)"

  • chuck
    chuck
    09 October 2011 am31 02:22 |

    having problems..... cannot create \storagecard\program files

    also were do i find the firmware download for the Sinoembed board..... the head unit is made by lightinthebox

    • Petrut
      Petrut
      09 October 2011 am31 11:23 |

      1. sd card full
      2. different name for sd in your unit. Run total commander and look at drives names.

  • m0nik0n
    m0nik0n
    08 October 2011 pm31 14:50 |

    I want to listen mp3 using the nitrogen player, but my dynavin e39 radio still plays songs. Do you know how to turn off all sound sources except wince?

    • Petrut
      Petrut
      08 October 2011 pm31 16:02 |

      no, but i`m sure there is a way. Maybe set sound to zero ?

  • Horst
    Horst
    06 October 2011 pm31 13:21 |

    Hi Petrut,
    today I have gotten a new "NOVADA 2450 N 117 PCB V6"-Navi Board with WINCE6. But I'm afraid to use your software. Last time I have used your patch I mostly got a white screen with "Boot Authenticate is Error!". How can I fix it, when this error appears again?

    • Petrut
      Petrut
      06 October 2011 pm31 14:21 |

      get the firmware for it to be sure...
      i still have no idea why you had issues, because wince 6 patch is 100% SAFE.

  • Dave Toulson
    Dave Toulson
    06 October 2011 am31 10:23 |

    Just for information, I never did get online traffic to work via wi-fi. I think you need to ensure that, in Dynavin units, you have a TMC receiver as without this you will not get any kind of traffic (TMC or Online). I did try various mods. to the sys.txt but still got nothing so I ended up uninstalling the wi-fi patch as traffic was all I really wanted. If anybody out there has got online traffic to work and is willing to share their sys.txt for Igo Primo, I would give it another try!

    • Petrut
      Petrut
      06 October 2011 pm31 14:15 |

      i am 100% sure i have customers with online tmc working in primo 1.2
      i`ll try to track some of them to give me more details about how they made it work.

      • Dave Toulson
        Dave Toulson
        06 October 2011 pm31 21:17 |

        Thanks Petrut - much appreciated.

        • Dave Toulson
          Dave Toulson
          09 October 2011 pm31 16:19 |

          Any luck Petrut?

  • CooLer
    CooLer
    05 October 2011 pm31 19:42 |

    After purchasing the patch in the system can run programs under Windose mobiles?

    • Petrut
      Petrut
      05 October 2011 pm31 20:26 |

      will run all wince designed programs, and some windows mobile ppc 2003, maybe windows mobile 5. BUT ONLY some programs work, and most of them need to be extracted, patched, to be run as exe files.

  • m0nik0n
    m0nik0n
    05 October 2011 pm31 14:50 |

    Other question:

    Is it possible to save permanent the desktop background color:
    http://monikon.fm.interia.pl/ftp/desktop.png
    ?

    • Petrut
      Petrut
      05 October 2011 pm31 19:22 |

      in next release.

      • m0nik0n
        m0nik0n
        06 October 2011 pm31 12:27 |

        also for the wince 5 ?

        • Petrut
          Petrut
          06 October 2011 pm31 17:27 |

          only for wince 5. in wince 6 is already possible.

  • deadwiz
    deadwiz
    04 October 2011 pm31 19:02 |

    Is there a way to auto load a program at startup in the Wince 5 patch? I want the media player I use to boot up on start. Is that possible?

    Thanks!
    deadwiz

    • Petrut
      Petrut
      05 October 2011 am31 06:47 |

      yes, edit desktop.mscr and add a new line after the last line with iphone menu. Use the same syntax. I`ll post a tool soon on the site that will add stuff to startup very easy.

      • deadwiz
        deadwiz
        11 October 2011 pm31 18:25 |

        Awesome! Thanks!

  • Mo
    Mo
    03 October 2011 am31 03:32 |

    you latest change log says - bluetooth support ( control panel ).

    what does it mean?

    is the phone book feature available?

    thanks

    • Petrut
      Petrut
      05 October 2011 am31 06:45 |

      no phonebook. On some units OBEX file transfer is supported. That`s it for now...

  • takim
    takim
    01 October 2011 am31 05:32 |

    Hi Petrut,
    Just buying and downloading "Wince patch for ANY Nowada 2450 device ( ex. AS7608, WD6050, CY7088, etc ), wince 5, 800x480".
    But in the Readme file, it stated that if i need english firmware it's available at request. Can have that firmware ? Because my current Wince is in chinese language.
    My Board Information is :

    - Mesada 2440
    - Wince 5.0
    - ARM920T S3C2440A (385MHz) Res 800x480
    - Have NWDFlash, NandFlash, adn StorageCard.

    Hope you can help.

    thank you

  • elfer
    elfer
    28 September 2011 pm30 18:29 |

    I have a Dynavin D90 platform (WinCE 6?) and would like to tether to my Android phone.

    Once I buy the WinCE patch, could I tether over USB rather than WiFi?

    It would save having to install a separate 12v-to-5v transformer/usb charger for the phone. Would be a simpler and more elegant solution for me than WiFi tether.

    • Petrut
      Petrut
      28 September 2011 pm30 21:39 |

      no, usb thethering is not possible. Only wifi, or 3g modem.

      • elfer
        elfer
        29 September 2011 pm30 19:31 |

        thanks for the reply. wifi it is then.

  • m0nik0n
    m0nik0n
    28 September 2011 pm30 16:18 |

    I have one more question:
    1. Is there an easy way to change icon size on the desktop view?
    2. It is possible to change background image on the wince loading screen?

    • Petrut
      Petrut
      28 September 2011 pm30 16:46 |

      1, not possible at all
      2. only manufacturer can ( need special firmware files , i dont have them )

  • MURAT KASAPOGULLARI
    MURAT KASAPOGULLARI
    28 September 2011 pm30 12:06 |

    I use your patch and i have a problem, i asked it before in here but still my problem continue. I dont open the virtual keyboard. ı tried all the ways but i dont do it. Please help me.

    • Petrut
      Petrut
      28 September 2011 pm30 12:51 |

      really not possible.
      make sure screen is perfectly calibrated so you can press the keyboard icon on taskbar.

      • MURAT KASAPOGULLARI
        MURAT KASAPOGULLARI
        30 September 2011 am30 11:30 |

        yes i calibrated the screen perfectly. I click the keyboard icon on taskbard but nothing opens.

  • Dave Toulson
    Dave Toulson
    27 September 2011 pm30 12:47 |

    Okay Petrut. If I don't use iphone menu I need to create a shortcut to Primo on the desktop. I tried this in shortcut creator but nothing appears. Can you run through the process? Is there another way of accessing Primo without iphone menu? I can't get anything to show up on online traffic either.

    • Petrut
      Petrut
      27 September 2011 pm30 14:08 |

      make shortcut in nwdflash/desktop. It works, trust me :)
      About traffic, i think you need to enable networks in sys,txt, search on forums, i csn`t help, no traffic info in my country so i never test it, but many customers have it working.

      • Dave Toulson
        Dave Toulson
        27 September 2011 pm30 21:08 |

        I made the shortcut okay so now I can start up Igo Primo without using the iphone desktop but it runs very slow and jerky. It didn't do this before so it must be something I have done in installing the patch. Is it possible to uninstall the wi-fi patch as I don't think I will get traffic to work and this is the only reason I wanted it. Is there anything I can do to make Igo run as it did before?

        • Petrut
          Petrut
          28 September 2011 am30 05:56 |

          i have no idea why primo works slow on your unit.
          Try another primo version ( there are many releases... ).
          You could remove wifi patch ( install wincepatch over it ) and see if will be faster.

          • Dave Toulson
            Dave Toulson
            28 September 2011 am30 07:34 |

            To install wincepatch again (over wifi patch) do I just go through the installation process again and choose "upgrade" or "new installation"? Do I remove all files relating to wi-fi patch first?

            • Petrut
              Petrut
              28 September 2011 am30 07:47 |

              new installation. It will remove all wifi patch stuff.

  • Dave Toulson
    Dave Toulson
    27 September 2011 am30 11:39 |

    Hi Petrut,
    Connected to the internet okay via wi-fi patch but now the Navi program (Igo Primo 1.2) keeps coming up with a memory (cache) error and closing down. Also seem a lot slower on the Navi program than before. Any ideas?

    • Petrut
      Petrut
      27 September 2011 am30 11:49 |

      never had the issue. I have many customers with primo 1.2 and wifi working fine. DO NOT use iphone menu in same time with primo and wifi. Not enough RAM.

  • Jeanluc
    Jeanluc
    26 September 2011 am30 00:31 |

    Hi Petrut

    I have a Mesada_2443 equipped with ARM920T S3C2443 chip (Wince 5) capable of 800x480 px. Which one of your products should I buy ? Would I also be able to upgrade my OS to CE 6 ?

    • Petrut
      Petrut
      26 September 2011 am30 11:54 |

      not possible to upgrade wince 5 to 6.
      item no 8 from wicne 5 section should work. If doesnt work, i`ll make a custom one for your unit

      • Jeanluc
        Jeanluc
        29 September 2011 pm30 15:16 |

        Hi Petrut

        I got the GAPI DEVICE MISMATCH, where do I get the fix?

        Thanks !

        • Petrut
          Petrut
          29 September 2011 pm30 17:55 |

          you have an unsupported unit. remove gapi completely.

  • Dave Toulson
    Dave Toulson
    25 September 2011 pm30 14:51 |

    Everything seems to be okay apart from this: when I click on Igo Primo button from iphone interface, it says: GAPI DEVICE MISMATCH". Can this be sorted?

    • Petrut
      Petrut
      25 September 2011 pm30 15:08 |

      use system tools app, there is a gapi fix there...

  • Dave Toulson
    Dave Toulson
    25 September 2011 pm30 13:34 |

    Installed the WinCE patch and all seems ok but I am a little confused over the WiFi patch instructions. It says to install DeviceID.exe on the SD card and then enter desktop mode and run total commander - is this AFTER i have put the SD card back in the Dynavin? How do I email the deviceid.txt from the Dynavin as there is no email without an internet connection? Sorry if this sounds silly but I am finding my way here.

    • Dave Toulson
      Dave Toulson
      25 September 2011 pm30 14:48 |

      It's ok - I figured it out. deviceid.txt is on it's way!

    • Dave Toulson
      Dave Toulson
      25 September 2011 pm30 13:38 |

      One other thing ... how do I link the Igo Primo icon to the navi program?

      • Petrut
        Petrut
        25 September 2011 pm30 15:09 |

        read manual... all info is there :)

  • Dave Toulson
    Dave Toulson
    25 September 2011 am30 11:10 |

    Hi Petrut,
    Just about to buy the patch for WinCE5 - will I need to access the USB to GPS board on the rear of the unit or is the whole process done from the SD card?

    • m0nik0n
      m0nik0n
      25 September 2011 am30 11:47 |

      You don't need access to any USB interface. Whole installation of Petrut's WincePatch is done from the SD card.

      • Dave Toulson
        Dave Toulson
        25 September 2011 am30 11:58 |

        Thanks - that's great. I will go for it!

  • m0nik0n
    m0nik0n
    24 September 2011 pm30 22:11 |

    I have bought patch, it works perfectly, but I have some more questions:

    1. I would like to a navigation program to run after iphone menu is loaded. I added a new run line in in desktop.mscr, and the result is that first comes desktop view, then loads iphone menu, and afterwards a navigation software starts. My question is, is there any way to skip the desktop view? I deleted the sleep time line, and the iphone menu starts almost immediately, but still i can see the desktop view ;-( Should I delete explorer.exe and startkey.exe run lines in the desktop.mscr file? Is there any solution?

    2. If I set Time and Date settings, they won't save, ex. I'm setting time zone and my local time, switching of a navigation device (dynavin D90 Wince 5), then powering it on and the hour is wrong, and the time zone is unset. Any solution?

    Waiting for answer!
    Regards!

    • Petrut
      Petrut
      25 September 2011 pm30 13:24 |

      1.You cant bypass desktop view. Is essential for patch to work. Without it, no registry, drivers, etc will be imported at boot.
      2.old issue, nothing i can do. You can use gps time sync program from tools in iphone menu, but on some units it doesnt work, and need to run it manually.

  • Jan
    Jan
    23 September 2011 am30 11:05 |

    Hi,
    would it be possible to connect an external usb sound card to my Dynavin and make it run with a driver on wince?
    Can I use more then one usb devices on the plattform (usb hub)
    thanks in advance!

    • Petrut
      Petrut
      24 September 2011 am30 11:24 |

      No

  • Dev
    Dev
    23 September 2011 am30 10:41 |

    hi Petrut, how are you? wish you fine.
    Petrut, is that possible to use live tracking via wifi that conneced to my mobile phone? How to use that?
    Thanks

    • Petrut
      Petrut
      24 September 2011 am30 11:26 |

      you need tracker program from me and a tracker account.
      email me for a request.

  • Xtian
    Xtian
    22 September 2011 am30 09:16 |

    Hi Petrut. I purchased the Wince V6 patch package, I have a Dynavin e39 whit thenowada 2450 board and ARM1136J. I followed the instructions to detail. Now I didn't know if I needed to flash or as you say reflash (the instructions are pretty cryptic on that), but anyway I tried several times and it just wont load on its own at bootup (from power up with the factory SD), so I went to the next step and did the Wince Patch install. It seems to work, I get the desktop, Iphone screen etc. NOW
    it seems slower, overall, and there is no real explanation on how to make the system auto start the Navi, after going through the desktop load and the selecting the navi icon on Iphone to then load the navi.
    Did I miss something is there something else I should do? DO I need the reflash ?
    Thanks
    Chris

    • Petrut
      Petrut
      22 September 2011 am30 09:47 |

      first, firmware to flash ( reflash ), is not available for dynavin wince 6 units.
      Also system shouldnt be slower, no way. Try a reinstall.
      If you need to autostart, set desktop.exe in autostart menu in main shell setings.
      That way system will start desktop, then iphone menu.
      If you need a specific program to run after iphone menu is loaded, you can add it in desktop.mscr file from sd/program files/desktop. If you are not good at computers, email me and i`ll send more instructions.

  • JugglerXL
    JugglerXL
    22 September 2011 am30 08:25 |

    Hi Petrut :-)

    i boght this device from ebay: http://www.ebay.de/itm/AUVIDIO-NAVI-AUTORADIO-2Din-DVBT-DVD-GPS-NAVIGATION-/180727289615?pt=CE_Auto_Hi_Fi_Autoradios&hash=item2a142f970f#ht_15049wt_1152

    and i would run yor patch and will try 3G and so on...

    who is the real manufacturer of this device? It´s not Audiovision, that i know ;-)

    on the device is working wince 5.0, can i upgrade to wince 6.0 an what´s the benefits i profit from?

    if you need pictures from the Hardware, mainboard or something else, feel free to contact me :-)

    thanks in advance

    JugglerXL

    • Petrut
      Petrut
      22 September 2011 am30 09:42 |

      that is a very powerful device, with very nice menus, i know the brand. They are manufacturers ( Auvidio ).
      I`m sorry but my patches will not work at all on your unit, i never had one to test and pretty sure that the system is well locked.

      • JugglerXL
        JugglerXL
        22 September 2011 pm30 16:31 |

        Yes :) very nice GUI and menue... that´s why my decision for the AV601... it looks a bit more "professional" like other China-RNS i think ;)

        Auvidio= manufacurer ? are you sure Petrut?

        i have access to the WinCE 5.0 main system and backuped the complete NAND-Flash Drive so i find some interisting files like a UIDATA.res with 50MB for example... but i´m an absolute noob and when i try to extract the res file i became an error called incorrect filename :(

        Petrut, if you are interested or may have a closer look on the files, i can send you a copy by mail... ;)

        so long... :)

  • Robin Favre
    Robin Favre
    21 September 2011 pm30 14:42 |

    Hi, perhaps I'm stupid but I followed your installation instructions it has install and reboot, but at the point where you say i must choose cardstorage/programfiles/desktop, there isn't any desktop folder in my programfiles folder on storage root only inside are : Calc98CE, Close, EuroKeyBoard, Fileviewers, Flash, Games, hODB, MSPlus, Naviplayer, NetCF3.5, nitrogen, pocketrar, pocketpicture, screenshot, sql3.5, Tcpmp, Tools, totalcommander, xnview pocket...... but no desktop folder, could you please help me ?

    best regards
    Robin

    • Petrut
      Petrut
      21 September 2011 pm30 16:12 |

      I have no idea why folder is missing, but copy desktop folder from wincepatch/program files to sd/program files

      • Robin Favre
        Robin Favre
        21 September 2011 pm30 16:31 |

        ok done everything works like a charm your the BEST !!!

  • m0nik0n
    m0nik0n
    21 September 2011 am30 05:32 |

    I would like to buy your WinCE Patch from You Petrutms for my Dynavin E39 WinCE 5, but first I have few questions:
    1. Did the evolution of the WinCE 5 stop at version v8.1 (Does it mean no keyboard, mouse, and a working OBD software support?)

    2. If I buy WinCE Patch now, do I have an access to the newest update, or do I have to buy new version every single time?

    3. On the Wince patch demo video I saw that there is a possibility to start automatically desktop view, but is there any chances to start the iphone look interface and then afterwards to launch navigation software (ie.: IGO) also automatically (by default)?

    Waiting for answers,
    Regards!

    • Petrut
      Petrut
      21 September 2011 pm30 16:10 |

      1.For the moment yes
      2. Free updates for life
      3.is possicle to autostart any program you like

  • artur
    artur
    21 September 2011 am30 03:29 |

    Hi, i would like to use software to take screenshot of OS (WinCE 6), i sell witson dvds and i would like to use screenshot on my announces, i can pay for service, how can i contact you ? Thanks

  • Horst
    Horst
    20 September 2011 am30 02:57 |

    Hello Petrut,
    For 2 weeks I have bought a TID 8928 with a "NOVADA 2450 N 117 PCB V6"-Navi Board with WINCE6. Then I bought the WINCE6.0-PATCH from you. But after I have installed your patch I mostly get a white screen with "Boot Authenticate is Error!". I have tried to fix the problem by installing the original firmware for the Navigation-Board. But I have only found "NOVADA 2450 N117 PCB V5". The Navigation-Board is "NOVADA 2450 N117 V6". After I have installed the Firmware the screen only shows "No Signal".
    Have I killed the Navi-Board now or is there a chance to make it working again?

    • Petrut
      Petrut
      20 September 2011 am30 05:47 |

      i`m sorry, you killed the board.
      There was a solution for your error, next time please email me when you have issues, don`t reflash with files found on internet.

      • Horst
        Horst
        20 September 2011 am30 10:17 |

        Hi Petrut,
        which part of the board I have killed?
        Is there any possibility to replace the "killed" part?
        I have learned to repair Radios and televisions.

        • Petrut
          Petrut
          20 September 2011 pm30 17:44 |

          the bootloader ( software ). To fix it you need to jtag the board and need original files. I don`t have the files ( for jtag, firmware, etc )

          • Horst
            Horst
            06 October 2011 pm31 13:10 |

            Hi Petrut,
            today I have gotten a new "NOVADA 2450 N 117 PCB V6"-Navi Board with WINCE6. But I'm afraid to use your software. Last time I have used your patch I mostly got a white screen with "Boot Authenticate is Error!". How can I fix it, when this error appears again?

  • Dave Toulson
    Dave Toulson
    18 September 2011 pm30 13:17 |

    I have the Dynavin E46 in my BMW (V5 on E90 platform) but have been told by the seller that it is NOT a TMC model. Can I still use the patches and connect to traffic via wi-fi?

    • Petrut
      Petrut
      18 September 2011 pm30 17:06 |

      yes, many customers use my patches for that purpose.

  • Nadine
    Nadine
    18 September 2011 am30 04:49 |

    Hi Petrut,
    I have installed your patch on my Dynavin DVN-MBC with a Nowada 2450 board running Wince6. Can you help me with reflashing this unit? I cannot find the firmware anywhere.

    • Petrut
      Petrut
      18 September 2011 pm30 17:08 |

      because there is no firmware available for your unit.

  • azz01
    azz01
    16 September 2011 pm30 20:07 |

    Petrut, does the 8.3 version enable bluetooth data link on a nwd2450 wince6? that's about all I need - get the unit to connect to the internet via bluetooth and my cell phone. If yes, is connection established autoamtically/ settings remembered through soft reset?

    • Petrut
      Petrut
      17 September 2011 am30 04:31 |

      no, sorry. For now is just a simple bluetooth support, with obex file transfer one SOME firmware revisions. Is not stable. I`m working on DUN support. You can buy wifi patch, it does same thing, but you need a phone with wifi AP software.

      • azz01
        azz01
        17 September 2011 pm30 17:07 |

        thanks for the quick response. my unit does not have proper usb port (doesn't show up flash card as a drive in totalcmd) and I don't feel like opening the unit for soldering. Would probably sell this one and get something else as data trasnfer is critical for me

  • David B
    David B
    16 September 2011 pm30 16:28 |

    Hi Petrut,

    Can you please confirm the correct patch for:

    Xtrons Model: D711G
    RIZTECH
    RT GPS
    WinCE 5.0.1400
    46.3MB RAM
    ARM ARM920
    800x480

    Thanks.

    • Petrut
      Petrut
      17 September 2011 am30 04:29 |

      you probably need cuztom version. send to my email the details from resinfo and total commander, as instructed in tutorials.

  • Tothe
    Tothe
    16 September 2011 am30 07:33 |

    Petrut,
    I have bought wince patch 6. As you told me in VW GTI forum,
    i have email you the resinfo for you to build a custom patch for my 2 din unit. Let me know that you have received my email and working on it. Thank you.

    • Petrut
      Petrut
      16 September 2011 am30 11:22 |

      yes, check mail

  • murat
    murat
    15 September 2011 pm30 19:47 |

    petrus i followed your instructions but it keeps saying
    data files missing read the doc what should i do

    • Petrut
      Petrut
      16 September 2011 am30 06:02 |

      This is discussed over and over.
      Copy program files folder from data800x480 archive in wincepatch folder.

  • leon
    leon
    14 September 2011 pm30 20:26 |

    hello petrut,
    i've your wince patch and wifi patch. but wifi only works when i started some devices manually. you've emailed me that you are working the problem but still didn't got an answer/update. i think i've found a piece of the problem. i see that the nandflash contains files that should not be there for example i see 3 other nandflashes in the nandflash file and a lot of strange files with names as symbols. do you have a program that i can use to delete files because now the system says it isn't possible.
    with kind regards and hoping for a solution

  • Peter
    Peter
    13 September 2011 pm30 21:15 |

    Hi Petrut,
    I am having a similar problem to one of your other customers. I installed the patch, connected my HWUN3 usb adapter but it is asking me for a driver name when I connect. It autopopulates with rt.....dll but when I click ok it keeps popping back up saying unidentified usb device. How do I correct this?

    • leon
      leon
      14 September 2011 pm30 19:27 |

      hello petrut,
      i've your wince patch and wifi patch. but wifi only works when i started some devices manually. you've emailed me that you are working the problem but still didn't got an answer/update. i think i've found a piece of the problem. i see that the nandflash contains files that should not be there for example i see 3 other nandflashes in the nandflash file and a lot of strange files with names as symbols. do you have a program that i can use to delete files because now the system says it isn't possible.
      with kind regards and hoping for a solution

    • Petrut
      Petrut
      14 September 2011 am30 06:55 |

      Wrong chipset in your adaptor.
      Buy edimax 7711 series.

  • Woodsy
    Woodsy
    12 September 2011 pm30 22:57 |

    Hi Petrut,

    I've followed the instructions for and installed the 3G patch but am getting a pop up box "Enter the name of the driver for the USB device" box which stays on screen + there is no "Internet 3G" icon.
    I'm running a Timeless Long TID-8952 BMW, WinCe 6, Nowada 2450,111Mb RAM. I have a Huawei E169 modem. The modem works fine on my PC and shows power when connected to the car DVD; other USB flash drives work okay. I notice that NWD directory is quite full if this is relvant. Do I need a custom patch?
    Follows are some relevant screen shots (sorry about the quality):
    http://dl.dropbox.com/u/4483458/DSCN0134.JPG
    http://dl.dropbox.com/u/4483458/DSCN0128.JPG
    http://dl.dropbox.com/u/4483458/DSCN0127.JPG
    http://dl.dropbox.com/u/4483458/DSCN0133.JPG
    http://dl.dropbox.com/u/4483458/DSCN0138.JPG
    http://dl.dropbox.com/u/4483458/DSCN0141.JPG

    Regards

    Woodsy

    • Petrut
      Petrut
      14 September 2011 am30 06:48 |

      1. Make sure you configured the modem on oc as instructed in 3G manual
      2. You need to manually create Internet 3G connection on wince 6, follow screenshots from manual.
      3. Make sure you have 8.3 patch installed.
      4. If system doesn't enter driver name automatically at boot, something may be wrong, reinstall 3G patch.
      For more details if you still have problems, email me.

  • Gabriel J.
    Gabriel J.
    12 September 2011 pm30 20:35 |

    Hi Petrut,
    How can I uninstall the patch?, I have a problem with my navi software and I can't use it.I have a message:Illegal operation report, The software performed illegal instruction(MAIN)....
    If I can't fix the problem I prefer to uninstall the patch and use the navi software.

    Thanks

    • Petrut
      Petrut
      12 September 2011 pm30 20:54 |

      remove program files from sd, reboot.

      • Gabriel J.
        Gabriel J.
        14 September 2011 am30 04:31 |

        I rebooted without the sd inserted and the patch remains installed.I rebooted from system tools, but nothing was uninstalled.

        • Petrut
          Petrut
          14 September 2011 am30 06:42 |

          Internal files can't be removed unless you reflash. Sd files, just delete program files folder and set navigation path to anything you want. Internal files are useless without sd part, and will do no harm.

  • trian
    trian
    12 September 2011 pm30 20:24 |

    Hi can you please tell me how can i disable my id on desktop startup on win desktop start a card with my id pops up i press ok and desktop starts can you please tell me how to disable this please?

    • Petrut
      Petrut
      12 September 2011 pm30 20:51 |

      i have no idea what you are talking about

  • Terremoto
    Terremoto
    12 September 2011 am30 08:57 |

    Hi, I want to buy your patch, but still looking if can I run radio from it or I need to use a factory installed software?

    Playing a mp3, after turning off the device will it reasume from the last played song or will it play the first album/first song?

    • Petrut
      Petrut
      12 September 2011 am30 10:45 |

      patch is only for gps side, you cant use with radio.
      if you use the provided mp3 players, it will resume from last song/position.

  • Muratkas2000
    Muratkas2000
    11 September 2011 pm30 21:24 |

    I dont use your patch on my AS-7608 V4.2 device. I use it only once after this it didnt boot the StorageCard\Program Files\Desktop\Desktop.exe, I have 4 problem:
    1.) Could you please say me how will i activate the screen keyboard. I try lots of way but dont do it. Please help me.
    2.) When i start the device in navi mode it wants me to make a screen calibration, after i do it and press ok it wants me to choose the navigation path. When i want to explore my sdcard for choosing the desktop.exe it shows me nothing. My device dont read the storagecard. I dont understand, how will i solve this bug. I tried 4 different sdcard. It always asks me same screen calibration then choosing navi path then dont read the sdcard inside. I format sdcard with FAT format and named it as STORAGECARD. But the device may want me to named as StorageCard. Is there a case senstive. On win7 it automaticly make the sdcard name uppercase. I dont do it like "StorageCard". May be the main problem is this?
    3.) I tried your patch only one time and saw that i dont touch the upper options for example close button (X), File, Edit, View.... Screen dont sit the screen correctly. How will i calibrate it.
    4.) is there a way to use your patch without using a sdcard after install your patch on sdcard. I dont want to use a sdcard. Because of my second problem.

    • Petrut
      Petrut
      12 September 2011 am30 06:01 |

      1. You must have taskbar visible ( set it always on top ). Then you can select one of the 3 keyboards.
      2. name sd whatever you want. It looks that you have a hardware issue, sd card reader malfunction.
      3.calibrate from mainshell of gps menu, touchscreen section. Use a pen.
      4. NO.

  • trian
    trian
    11 September 2011 pm30 19:21 |

    ok i sorted out problem from parameter.

  • trian
    trian
    11 September 2011 pm30 19:04 |

    Hi can you please tell me why i got no sound in the windows and navigation mode on dynavin i just noticed it must i go to some parameter?

  • trian
    trian
    08 September 2011 pm30 16:52 |

    Sorry problem resolved car battery was low and effected the unit everythin is ok.

  • trian
    trian
    08 September 2011 pm30 16:34 |

    No Petrut i didnt put card in any other unit i ran the patch again on my unit because it was saying because i was getting a driver not installed message but after it would automaticly sign in the reason why i loaded patch again is because windows only saw 1 usb from the back the one with wifi adapter and i wanted to play music with the nitrogen with usb flash its my fault for messing around with the unit.do you have any thoughts? i wont mess around any more i promise.

  • trian
    trian
    08 September 2011 pm30 15:06 |

    Hi when i start desktop mode it asks me something about usb in chinese writing i have to close those windows and then it goes to desktop mode and immediatly after it takes me to iphone mode which i have to close and i have to take in and out the wifi adapter for for it see it before when i was going in to desktop mode the usb window automaticly signed in and wifi connection was available now it says usb driver error does any body know?

    • Petrut
      Petrut
      08 September 2011 pm30 16:14 |

      you said that wifi works fine. Now it doesn`t ? dont mess with the system. Wifi on dynavin is perfect, if you have problems you did something wrong, again. Not that wifi patch will work on one unit only, dont try to put sd card in another unit, it will kill the patch.
      When system will enter in desktop mode the driver name will be automatically entered. Do not manually close driver window, etc.

  • trian
    trian
    07 September 2011 am30 07:21 |

    can you please tell me how can i put igo primo in the iphone menu in gps section i have dynavin?

    • Petrut
      Petrut
      07 September 2011 am30 09:11 |

      edit igo primo icon path. instructions in readme file.

  • trian
    trian
    07 September 2011 am30 07:18 |

    Hi petrut everything works great with your patch v 8.3 and wifi is perfect.

  • ghoul
    ghoul
    06 September 2011 pm30 20:17 |

    Thanks for the support.
    Patch worked like a charm.

    Recommendeed

  • Gabriel J.
    Gabriel J.
    05 September 2011 pm30 15:56 |

    Hi Petrut,

    I have a W2-D9200V with mesada 2440 board.I download the Wince patch for ANY Nowada 2440 , 800x480, Wince 5.0 and it works fine.The only one problem I have, is that I couldn't find the autoupdate for the NWDTCali in order to change the system to english language.

    • Petrut
      Petrut
      05 September 2011 pm30 17:13 |

      i dont provide them anymore because i had too many problems ( bricked boards ). Sorry.

      • Gabriel J.
        Gabriel J.
        05 September 2011 pm30 21:02 |

        I have just reinstall your patch and now all is in English.
        Thanks you for the answer.

  • Georg
    Georg
    04 September 2011 pm30 15:28 |

    I have a Hualingan 8726 für Rover. There is a Nowada N303 board inside with NandFlash (64MB), 128MB RAM ... witch patc do I have to buy for it. I just want to run Navigon, nothing else.

    • Petrut
      Petrut
      04 September 2011 pm30 17:14 |

      then just install navigon on it, and set path to the navigon executable.
      I dont offer support for gps programs, sorry.

  • trian
    trian
    03 September 2011 am30 05:42 |

    Hi Petrut and to all last week i bought a dynavin e46 it was all ok but i took out sd card when i tried to put back i accidently jamed the card on top of the socket i tried to pull it out and i damaged the sd card what do i have to do it had the wifi patch and the win6 on the card when i install sd card it says no navigation software found what must i do buy wifipatch and wince6 patch or contact the dealer
    ?

    • Petrut
      Petrut
      03 September 2011 am30 08:11 |

      If the system can't see the sd card, try another card. If still doesn't work, contact dealer, card slit damaged. Wifi and wincepatch you have them on email/server

      • trian
        trian
        03 September 2011 pm30 12:45 |

        How can i make a account do i have to register or what sorry i am a newbie?

      • trian
        trian
        03 September 2011 am30 08:24 |

        i tried the sd card on p.c card damaged where can i get them on email server?
        wifi and wince patch thank you petrut

        • Petrut
          Petrut
          03 September 2011 am30 09:24 |

          Wifi is always sent by email, so you must have it in your emails. Wincepatch is always on the server, every customer have one account on wincepatch.com, so download it from your account.

          • trian
            trian
            03 September 2011 pm30 12:31 |

            Hi once again i bought the dynavin from dynavin shop in greece he programed and sent the unit to me i phoned him to send me the patches and he said no he cant i suppose that it is in his email account not mine anyway is it possible to buy from you the patches because i dont think i will get anywhere with him? thank you once more Petrut

            • Petrut
              Petrut
              03 September 2011 pm30 13:34 |

              yes, files are encoded to your unit. They dont have the tools to recode, or the permission to send files by email. If you damaged the sd, is your fault, always you should do a backup.
              I can recode files for you, but you need to buy both patches.

              • trian
                trian
                03 September 2011 pm30 13:52 |

                ok i bought both patches whats my next proccedure?

              • trian
                trian
                03 September 2011 pm30 13:43 |

                yes i will buy both patches now if it is possible thats what im asking for.

  • h0mem
    h0mem
    31 August 2011 pm31 22:15 |

    Hi,
    i've buyed the patch for 6.0 but i thing i need a custom on for Roadrover C7037VT, cause some paths are different. Ive took a screenshot from the root path.

    • Petrut
      Petrut
      01 September 2011 am30 06:19 |

      send all resinfo/total commander data to my email.

  • Sergio
    Sergio
    31 August 2011 pm31 13:49 |

    hi.
    i have 2din AOSINO AD6209.

    ** WR- tools ResInfo **
    BSP version: AIVCE6VB_rel1.00.5.09
    AT8X0 6.0
    Windows Embedded CE 6.0
    118 Mb RAM
    ARM1136JF-S AT840
    800x480 pixels, 65536 colors

    I have access via USB with pin 9.10.11.12.
    I can add the patch Wince6?

    greetings.

    • Petrut
      Petrut
      31 August 2011 pm31 16:08 |

      yes, will work. Probably you need a custom one, but will work. Also you can use wifi patch

      • Mo
        Mo
        01 September 2011 am30 02:26 |

        Hey Sergio,

        I have the same resinfo. Would you mind taking a picture for me of the board and sending it to me? it would really help me connect the USB to my board...thanks!

        mo.anwar@gmail.com

  • Izak
    Izak
    30 August 2011 pm31 12:37 |

    Opps upgrade.exe and not update.exe. I copied upgrade to sd root.

    • Petrut
      Petrut
      30 August 2011 pm31 16:12 |

      upgrade folder in root of sd. start from total commander or windows explorer. If you have a custom wince 6 patch version, will not work. Patch is tested and working perfect.

  • Izak
    Izak
    30 August 2011 pm31 12:29 |

    Hi,
    I am trying to install v8.3 from v8.2 but when trying to start update.exe from desktop nothing is happening. I copied update from file onto sd as per instruction. I noticed that the NWDFlash is almost full with only 168kb free could this be the problem. Please help?

  • Mo
    Mo
    28 August 2011 pm31 21:11 |

    Hi,

    Will the patch work on this? Also will the wifi work?

    BSP Version: AIVCE6_NANO_Rel1.03...
    AT8X0 6.0
    Windows Embedded CE 6.0.3122
    118 MB RAM
    ARM1136JF-S AT840
    800*480 pixels, 65536 colors

    • Petrut
      Petrut
      28 August 2011 pm31 21:33 |

      The patch will work, but I think you need a custom version. You can buy any patch and I'll send you manually the patch for your system. I'll need the resinfo data abd total commander partitions list, and task manager processes. Wifi will work if you have a USB connected to wince. If you can read a USB flash from total commander , is ok.

      • Mo
        Mo
        29 August 2011 am31 02:41 |

        Hi Petrut,
        I am interested in the wifi more than anything as I need a way to feed in traffic data. I connected the USB but couldn't read it in total commander. but if i put a media file in the usb, the unit reads with its usb reading program. does that mean the usb is enabled?

        • Mo
          Mo
          29 August 2011 am31 03:17 |

          by the way...would you know how to do the USB mod on this board?

          • Petrut
            Petrut
            29 August 2011 am31 04:51 |

            you need usb mod on this board, and i dont know to do it... i never had a unit like yours, i`m sure the pins are different. If you can get me the board layout ( look in tutorials to see an example of nowada board ), you can do the usb mod. Without it, no wifi.

            • Mo
              Mo
              29 August 2011 am31 05:02 |

              :( if i send you a picture of the board, would you be able to help? I don't know where to get the board layout....I asked the manufacturer...but he wasn't helpful

              • Petrut
                Petrut
                30 August 2011 pm31 16:13 |

                i dont think so, but send it anyway...

  • Izak
    Izak
    26 August 2011 am31 00:04 |

    Hi,
    installed your Wincepatch and it is working good with Igo8 and Tomtom on Nowada2450 CE6 111mB ram unit. installed hobdrive software and running with standalone version. How can I connect Hobdrive to bluetooth ODB2 dongle using Wincepatch?

    • Thomas
      Thomas
      28 August 2011 pm31 12:04 |

      Hi,
      I have just installed the Wincepatch desktop, but some of the text is in chinese. how do i fix that?

      • Petrut
        Petrut
        28 August 2011 pm31 12:51 |

        A few words here and there will be in Chinese no matter what I do. 99% of menus are English.
        Make sure you have latest build.

    • Petrut
      Petrut
      26 August 2011 am31 04:49 |

      Only cable for now for obd.

      • Izak
        Izak
        29 August 2011 pm31 22:56 |

        Hi Petrut,
        Just to make sure I understand you correctly. I need to install v8.3 run the software needed and do the usb hard wiring mod to make OBD2 to work with usb cable?

  • kadri
    kadri
    24 August 2011 pm31 14:33 |

    Hi Guys
    I bought the following chinese unit:

    http://www.aliexpress.com/product-fm/430382797-Free-Map-HL-8164GB-7-0-inch-2-din-Car-DVD-player-GPS-for-SUZUKI-GRAND-wholesalers.html

    which patch work ? also idont like the menu icons and colours can i change it ?

    • Petrut
      Petrut
      24 August 2011 pm31 21:12 |

      you cant change menus or colors.
      The wince 5 patch for as7608 will work fine.

  • Simon
    Simon
    21 August 2011 pm31 19:09 |

    HI. I have a hualingan dvd player -

    http://en.hualingan.com/html-en/product-qnxmhXRljQPA-BMW+3%28E46%29+DVD.html

    Its similar to dynavin unit and runs windows ce5.

    Which patch (if any) will work on my unit ? Thanks

    • Petrut
      Petrut
      21 August 2011 pm31 19:33 |

      the wince 5 patch for as7608 will work fine.

  • dojan
    dojan
    21 August 2011 am31 04:10 |

    hallo,

    i have a dynavin mbe-most and i would like to patch it completly.. also i want to be able to access to wince desktop, patch the wifi and 3g !!

    so plz tell me what i need to buy and plz make me an offer.

    thanks

    • Petrut
      Petrut
      21 August 2011 am31 06:47 |

      You need to buy wincepatch for dynavin( check the unit for wince version, should be 5, if is 6 buy wince 6 patch ), and then buy wifi and 3G patch.

  • Mo
    Mo
    16 August 2011 am31 07:16 |

    Hi Guys,

    I just bought the following chinese unit.

    http://www.aliexpress.com/product-fm/483980973-Free-shipping-Special-Car-DVD-for-Hyundai-IX35-Tucson-2010-2011-Car-DVD-GPS-with-CANBUS-wholesalers.html

    Will your patch work? Also it has usb connection already....do I need
    to do the USB mod still?

    Thanks!

    • kadri
      kadri
      24 August 2011 pm31 14:28 |

      Hi Guys
      I bought the following chinese unit:

      http://www.aliexpress.com/product-fm/430382797-Free-Map-HL-8164GB-7-0-inch-2-din-Car-DVD-player-GPS-for-SUZUKI-GRAND-wholesalers.html

      which patch work ? also idont like the menu icons and colours can i change it ?

    • Petrut
      Petrut
      16 August 2011 pm31 12:48 |

      i have no idea what board is inside. Run the tools as instructed in tutorials and send details about partitions and board by email.

      • Mo
        Mo
        17 August 2011 am31 04:30 |

        thanks...I don't have the unit yet...just ordered...but the manufacturer told me they use the nowada boards...

        where can i learn about your patch more...like once i get and install the patch...can i still use the old functions? like dvd, bluetooth, picture in picture etc.?

        • Mo
          Mo
          17 August 2011 am31 04:41 |

          after further reading i understand that your patch will not be able to access the bluetooth phone function. so is there a way to still use the original software that comes with the device and use your iphone interface when i need to use wifi?

          please let me know.

          Thanks!

          • Mo
            Mo
            17 August 2011 am31 05:08 |

            sorry Petrut...more questions...

            First of all, you have done great work!!

            I think I am confused to how the bluetooth calls work....

            1. Lets say I install the wince patch and run the iphone interface. then i run the igo navigation. what will happen if i receive a phone call? can i receive the phone call through the unit?

            2. If I am running the iphone interface and I need to make a phone call, do I have to switch to the original software that came with the unit? if so, do I have to uninstall the patch or so i just run the "Original Shell" icon.

            Thanks!

            • Petrut
              Petrut
              17 August 2011 am31 07:44 |

              you should watch the video from first page...
              every original menu can be used as usual, only gps menu will be modified. If a call comes in, the unit will automatically switch fom gps/iphone to BT, etc.

  • Serg
    Serg
    14 August 2011 pm31 19:03 |

    Hi!
    Device:
    SMDK2450 Board 5.0
    Windows CE 5.0.1400
    102 MB RAM
    ARM920T S3C2450 (400 MHz)
    800x480 pixels, 65536 colors
    Menu navigation is just out of the window choose the executable file.
    Windows chinese. module marked HK913 v1.1
    Proccesor S3C2451XH-40
    Patch №9 - download, installation, but not work. folder on device named - Storage_Card but not StorageCard. Please, help :)

    • Petrut
      Petrut
      15 August 2011 am31 06:16 |

      You have another model, so I'll rebuild the patch and send it manually in 48h maximum.

      • Serg
        Serg
        15 August 2011 am31 09:04 |

        Thank you. I will wait.

        • Serg
          Serg
          16 August 2011 pm31 18:07 |

          Thank you for your work! The shell is started. But almost no one program will not start. (players, calculator, etc.). It looks like windows is strongly reduced. English firmware is not available as I understand it ... It is sad. Thanks again!

          • Petrut
            Petrut
            16 August 2011 pm31 18:17 |

            many programs should work. Games, office, some tools, etc.
            All SMDK 2450 units have a really bad wince system loaded...

  • Dev
    Dev
    14 August 2011 am31 10:39 |

    Hi Petrut,

    About 3G patches, is that support for almost usb 3G modem brand or must be special usb 3G modem?

    About the system, is that embedded into the OS system, or just add script and .dll files into the windows file? because if just the script and .dll files into the windows folder, it means the 3G device would be loaded after the system completely copy to windows.

    About that price, is that including support for the next upgrade?

    Thank you so much

    • Petrut
      Petrut
      15 August 2011 am31 06:14 |

      Any modem that can be detected by wince is compatible. Best modems are huawei.
      The patch is a complex set of dll, scripts, registry that are forced at installation in the wince system.
      On wince 6 will always stay there until complete firmware reflash.
      All upgrades are free.

      • Dev
        Dev
        15 August 2011 am31 07:49 |

        Thank you for your great reply, I would like to buy it, may I get your email please?

  • Maurizio
    Maurizio
    14 August 2011 am31 10:28 |

    Hi Petrut,
    I just bought the following system
    Road Emperor Volkswagen Edition - In Dash Car DVD With 3G Internet (WIFI, 2DIN, GPS, DVB-T)

    Information about the system
    - Board: Telechips TCC8900
    - CPU Core: ARM 1176JZF-S (500 MHz)
    - GPU: ARM Mali-200 (200MHz)
    - Internal memory: 256 MB di RAM, 256 MB di NAND Flash
    - External memory: SDHC (fino a 32GB) e drive USB (fino a 32GB)
    - Operating system: Windows CE 6.0

    GPS module: GS MediaTek-92m-J

    Please, let me know what is the right patch I should download. My system doesn't match with the ones available under the wince 6 section.

    Thanks and regards,
    Maurizio

    • Petrut
      Petrut
      15 August 2011 am31 06:11 |

      Sorry, none will work on your system.

  • Mircea Bagaian
    Mircea Bagaian
    13 August 2011 pm31 19:02 |

    Salut Petrut,
    Am cumparat alt gps Eonon G2216 si nu stiu ce soft de navigatie sa pun pe el, am incercat TomTom7 si ruleaza nu ma lasa din setrile din tomtom navigator sa-mi setez antena gps cand apas sa selectez antena imi revine in meniul dvd-ului la setari gps si acolo imi arata semnalul la antena dat in tomtom nu pot selecta antena gps.
    Ce imi recomanzi ca soft gps? am vazut ca merge Igo8 dar nu-l am actualizat din 2009 si poate sti tu ceva mai bun cu harti mai noi pentru europa centrala si de est.

    http://www.eonon.com/Car-GPS/2-Din-Car-GPS-DVD/G2216.html

    • Petrut
      Petrut
      15 August 2011 am31 06:09 |

      Caută igo primo... E cel mai bun.

  • skhokho
    skhokho
    13 August 2011 am31 07:42 |

    Hi Petrut,

    does your patch work on the Zenec ZE-NC2010 device, as i understand they of better quality than others

    • Petrut
      Petrut
      13 August 2011 am31 09:28 |

      No, doesn't work at all. Zenec is a very complex and locked wince system, I played with one and damaged it, I sent I to repair in Germany !

  • Ivan
    Ivan
    11 August 2011 pm31 15:34 |

    Hola Petrut,
    tengo el 2 Din
    que esta roto el microprocesador de arranque,tu tiees algo asi o solo parches que tambien estoy interesado,
    yo tengo este modelo pero sin 3G
    http://exclusivecarauto.com/2din-wifi-ipod-2011-p-362.html
    gracias

    • Petrut
      Petrut
      13 August 2011 am31 09:25 |

      Was never tested on that unit but I doubt will work. Completely different hardware.

  • Mark de Bruijn
    Mark de Bruijn
    11 August 2011 am31 11:06 |

    Hereby I would like to thank Petrut for his great patch and effort to help with my Dynavin V5 system. I had some problems, but it works perfectly now, thanks to his great support.
    If you want to get more out of your device, you should definitely buy this patch, as the possibilities of your device can be endless.

    Thanks Petrut!

    Best Regards,

    Mark

  • Cristian
    Cristian
    09 August 2011 pm31 16:08 |

    Hi,

    I bought 2DIN dvd unit AS-7401. Could you please, let me know if your patch work on my model ?
    Details:

    Haoke
    Platform_TYPE 5.0
    WINDOWS CE 5.0.1400
    101 Mb Rom
    ARM920T S3C2440A (357 Mhz)
    800x480 pixels, 65536

    Best regards ,
    Cristian

    • Petrut
      Petrut
      10 August 2011 am31 06:04 |

      Will not work on haoke systems.

  • Jaime
    Jaime
    08 August 2011 pm31 23:15 |

    Is your hack compatible with the new 2nd generation FlyAudio unit for Lexus?

    http://www.carlighttrends.com/Lexus_2009_IS_250_350_FlyAudio_Multimedia_GPS_p/flylexus.htm

    • Petrut
      Petrut
      09 August 2011 am31 06:54 |

      Yes, except desktop function, 3G, wifi. Everything else works fine. Patch is not listed due to lack of interest from flyaudio owners. If you need it, buy any wince 6 patch and I'll send yours manually next week when I come back from vacation.

      • Sean
        Sean
        03 September 2011 pm30 16:32 |

        I'm a flyaudio owner, and I'm very interested in these patches. Is there anything I can do to help with their development/testing? Is it possible to mod the usb connection like some of the other devices you mentioned?

      • Jaime
        Jaime
        09 August 2011 pm31 17:40 |

        I am definitely interested in flyaudio units. I'm hoping to be able to write some apps for this. I just bought one a few days ago.

        Couple of questions:
        - What do you mean by the desktop function not working? You mean I won't be able to access the WinCE desktop at all?
        - Since the unit has a USB connection, is there a way to get wifi working using this?
        - Is the patch reversible? Can I set it back to the way it came stock if I need to?

        • Sean
          Sean
          03 September 2011 pm30 16:38 |

          Jaime, I also have a flyaudio, and I'm interested I developing some apps for it. Let me know if you decide to try this, or if yuu have any other ideas.

        • Petrut
          Petrut
          10 August 2011 am31 06:10 |

          Yes, desktop will not work, only iPhone menu and programs. I had latest flyaudio unit and the USB is not connected to gps board, so wifi or 3G will never work. Patch is reversible.

  • JCarlos
    JCarlos
    06 August 2011 am31 01:18 |

    Hi, I'm ready to buy. I want to make sure it will work with my radio which is exactly like this http://www.cardvdkit.com/index.php?cPath=8&main_page=product_info&products_id=125

    Could the firmware also work?
    I'll just wait for your reply and then go ahead and buy it.
    Thanks.
    JCarlos

    • JCarlos
      JCarlos
      10 August 2011 am31 04:11 |

      Hi Petrut, I bought it a couple of days ago but had not had the time to install it. Looks nice, Thank you.

    • Petrut
      Petrut
      06 August 2011 pm31 14:54 |

      yes, this is the one of 100% compatible units: english firmware, patch, 3g, wifi ( need usb mod ), mnouse, keyboard.

  • Mark de Bruijn
    Mark de Bruijn
    05 August 2011 am31 09:45 |

    Hi!

    First of all!
    Wow, I think your patch looks great!
    But I've got a question.
    I have a Zenesis(Dynavin) 2Din system for an Audi A4 built in to my car. This one runs on WinCE6.0.
    I took a look at your litte sample movie, but I am missing the phone function in here. My radio has got a bluetooth function, so I can connect this to my phone. But now I am unable so send my contacts to the radio, so if I need to call someone from my phonebook, I still have to handle my phone. Is the function to copy my phonebook to the radio supported by your patch?

    Thank you!

    • Petrut
      Petrut
      05 August 2011 pm31 14:19 |

      no, bluetooth is not running under wince 6, so my patch can`t do anything about it.

      • Mark de Bruijn
        Mark de Bruijn
        05 August 2011 pm31 16:22 |

        I don't understand.
        Isn't my system running under wince 6 now then?
        And my carkit is a function of the 2din system and connecting to my phone now via bluetooth. This way I can call by opersting the phone from my Zenesis.
        Am I loosing the carkit function in total after installing this patch?

        • Petrut
          Petrut
          05 August 2011 pm31 21:42 |

          no dynavin unit runs on wince 6. Radio, bluetooth, tv, ipod, etc run un noname custom operating system, and navigation under wince 6. My patch will modify only navigation side of the unit, everything else will be the same.

  • Jovi
    Jovi
    04 August 2011 pm31 12:56 |

    Hi, I've got an TR089 the same as AS7608, with WINCE6.0 111 RAM 800*480PIXELS, you can see in this web
    http://www.tradetec.es/DVD-GPS-TDT-VOLKSWAGEN-/-SEAT-/-SKODA-RefTR089
    and my problem is the same as this
    http://www.youtube.com/watch?v=nHlYFoXRybk
    when I go to navigator system setup when i push SETUP TIME the screen is frozen, I can use navigators because of it.

    Do you know if i can solve it with any of your patches?

    thanks!!

    • Jovi
      Jovi
      04 August 2011 pm31 12:59 |

      sorry! I wanted to say: when I go to navigator system setup when i push SETUP TIME the screen is frozen, I CAN'T use navigators because of it, they're frozen too.

      • Petrut
        Petrut
        04 August 2011 pm31 13:41 |

        This is a strange bug. You need system firmware reflash, I think for both radio and gps side. I can provide both with my patch, but I can't guarantee that will solve your problem.

        • Jovi
          Jovi
          04 August 2011 pm31 15:20 |

          There're two patches wich one should i choose?

          • Petrut
            Petrut
            04 August 2011 pm31 18:52 |

            the one for 7608, of course.
            Also email me after purchase, and ask for firmware. I`ll send you links by email.

  • elmer
    elmer
    02 August 2011 pm31 18:07 |

    HI Petrut,
    I have a china rns:
    http://www.liberty-forever.com/index.php?page=215&lg=2

    The system information to ResInfo:

    Winner
    SMDK2450 Board 5.0
    Windows CE 5.0.1400
    105 MB Ram
    ARM920T S3C2450 (534MHZ)
    800x480 pixels, 65536 colors

    it's working your patch?i am verry interesting for this patch.

    • Petrut
      Petrut
      02 August 2011 pm31 20:45 |

      yes, item no 9 from wince 5 section.

      • elmer
        elmer
        03 August 2011 pm31 12:18 |

        does the 3g patch with this radio also ???

        • Petrut
          Petrut
          03 August 2011 pm31 14:35 |

          no, will not work because there is no usb port connected to gps board.

  • mario
    mario
    30 July 2011 am31 11:38 |

    HI Petrut,
    I have a china rns (noname, but it looks like ERISIN ES858v):

    http://cgi.ebay.de/AUTORADIO-DOPPEL-DIN-2-DIN-NAVI-GPS-DVD-PLAYER-DVB-T-/130502871713

    The system information according to ResInfo:

    BSP Version: AIVCE6_NANO_Rel1.03...
    AT8X0 6.0
    Windows Embedded CE 6.0.3122
    118 MB RAM
    ARM1136JF-S AT840
    800*480 pixels, 65536 colors

    This rns don’t have TMC. Is it possible with your WinCE 6 patch:

    1.to activate USB or Bluetooth (with bt manager) as WIN CE
    application
    2.to have English language instead of Chinese language in win CE6

    Thanks for Your answer!
    Kind regards Mario

    • Petrut
      Petrut
      30 July 2011 pm31 14:02 |

      For that board is not possible what you ask, sorry.
      But wincepatch works fine.

  • Peter V.
    Peter V.
    22 July 2011 am31 10:29 |

    something new from the GAPI support for Win CE 6.0?
    IGO8 and Primo will be so much faster :)

    • Petrut
      Petrut
      29 July 2011 am31 10:21 |

      yes, coming in v8.3 for nowada 2450 boards only.
      Probably next week.

  • Erick Soares
    Erick Soares
    22 July 2011 am31 01:24 |

    Hello,
    I have a similar case as posted by " Rey " on 21st July 2011: a chinese GPS/DVD unit with BSP Version: PrimaCE6EVB / Windows Embedded CE 6.0.3122 .

    It is a unit for Peugeot 207:
    http://www.tradetec.es/DVD-GPS-DVB-T-PEUGEOT-308-REFTR100/pt

    I like the current Main Menu interface, Radio interface, but I don't like the iPod, USB/SD interface. Can you offer better interface? And also USB/Bluetooth modification support for external device? I would like to connect to OBD2 bluetooth device and use for example HOBDrive application.

    Please let me know. I also have other friends with same model looking to improve the unit.

    The unit also has CAN-BUS decoder interface to show trip computer information (mileage, fuel consumption, external temperature, etc).

    Thanks

    • Petrut
      Petrut
      22 July 2011 am31 05:23 |

      usb/sd/ipod interfacces can`t be changed, those are built in firmware.
      Also no USB mod on your unit for external devices, that is only for nowada boards.

  • Rey
    Rey
    21 July 2011 am31 05:48 |

    Hi, Petrut!

    Do you have something for this board:

    BSP VERSION: PRIMA CE6EVB_REL9.04
    TT4X0A 6.0

    WINDOWS EMBEDDED CE 6.0.3122
    84.2MB RAM

    ARM1136JF-S TT4X0A

    800x480 PIXELS, 32-bit

    Thanks in advance,

    Rey

    • Rey
      Rey
      21 July 2011 am31 05:53 |

      Sorry!

      I've just seen that Neil Adams had asked you this before two months ago.

      Thanks anyway!

      • Petrut
        Petrut
        21 July 2011 am31 10:53 |

        please run the tools from tutorials and send me the results.
        I built several wince 6 custom patches since then, and maybe one will fit your system. I need partitions lists in total commander and processes lists from itaskmanager.

        • Rey
          Rey
          21 July 2011 pm31 18:43 |

          Total Commander shows:

          - data 2.54MB used/133MB free (which includes folders F_INI; F_RESET; DUMPFILES; EXTRADUMPFILES);

          - FlashDisk 162MB used/155MB free (which includes folders FBOOT; FROOT; LOG; WALLPAPAER);

          - Storage Card (GPS SD CARD);

          - Standard Windows CE folders.

          ITASKMANAGER shows:

          - taskmgr.exe; gpsmc.exe; fymmain.exe; servicesd.exe; udevice.exe; udevice.exe; udevice.exe; udevice.exe; nk.exe.

          Hope that helps...

          • Petrut
            Petrut
            21 July 2011 pm31 21:03 |

            yes, i have the right patch. You can buy any wince 6 patch, but don`t install the files you receive automatically, i`ll send the patch manually.

  • Nathalie
    Nathalie
    17 July 2011 pm31 23:40 |

    Hi Petrut
    It's me, Nathalie, the simple housewife :)
    I installed the patch and everything went well....
    Itried to use something (i think was the mp3 or the video player) and the following message appears...
    "The selected device Dynavin V3 BMW E46,CE 5.0, 800x480 Display: 800x480x16
    OS: Windows CE v5.00
    Doesent match your device
    Choose another device?"
    What should I do?
    Thank you very much for your time!
    PS Also have the Garmin soft in the Sd and no way to link it into the GPS....why?

    • Petrut
      Petrut
      18 July 2011 am31 05:38 |

      you must use system tools app from desktop and remove gapi, is not compatible with your system.
      Also you must edit the garmin icon from iphone menu, there are instructions in readme.

  • Rainer
    Rainer
    16 July 2011 am31 07:23 |

    Hi, after some problems with a new Version of Navigon, my Navigation Screen stayed dark, the normal setup screen doesnt come.
    So I made an firmwareupdate but I think, the firmware was not right.
    Now, the volume does not work right, for the radio, you can oly hear something at level 11 and 13,
    dor the music coming from the sd card, it only works with 12 and 14 but on different speakers.

    Do you provide, coming with your cepatch, also the right firmware?

    Thank you,

    Rainer



    Media: SM86U1.110226.V2.02
    Driver: 3B2A.DL30.1200W.8910
    System: SM8641_110428V1CAN8
    Chip&UI: STM8+V966U&(UI:XP.7.0)


    produced in April 2011, name on the Invoice:AS-7608G VW RADIO +DVB-T +TMC

    • Petrut
      Petrut
      16 July 2011 am31 08:47 |

      I provide firmware but only for gps side. You flashed radio side, abd probably used an older firmware. Current 7608 version is 4.2, I think you have 4.1. Contact audiosources or reseller and ask for right firmware based on serial numbers.

      • Rainer
        Rainer
        16 July 2011 am31 09:07 |

        Thank you, will do this.

  • Peter
    Peter
    15 July 2011 pm31 13:00 |

    Hi Petrut
    I have installed the wi-fi patch today, when i insert my dlink 140 and switch on it goes to the desktop and a box appears. The only thing i can read is usb the rest is in Chinese...,any Idea what to insert? cannot find in instructions
    thanks
    Peter

    • Petrut
      Petrut
      15 July 2011 pm31 16:56 |

      english firmware is mandatory. Read instructions from wincepatch, and reflash system. Then reinstall wifi patch. Also i`m not sure your dongle will work, depends of his revision...

      • Peter
        Peter
        15 July 2011 pm31 19:02 |

        Thanks for input
        right i have reinstalled the patch,reinstalled WI-fi,it now sees the dongle and the dongle light is flashing...I am getting what i think is a log on box with 4 or 5 lines to fill in, But they are all in Chinese.
        my desktop and iphone menu are all in English what am i doing wrong?
        thanks for fantastic customer support
        peter

        • Petrut
          Petrut
          15 July 2011 pm31 21:22 |

          I can't remember what unit you have. if you have dynavin, you need to reflash with English firmware, links in readme. If you have wince 6, dongle is not compatible, all wifi stuff is made in background at boot. Anyway, try to enter driver name rt2870.dll

          • Peter
            Peter
            17 July 2011 pm31 16:03 |

            Thanks again sorted..
            Is a vodaphone kc3750 modem compatable with your 3g patch ?
            Peter

            • Petrut
              Petrut
              17 July 2011 pm31 20:09 |

              try it on the unit, see if will ask for driver.
              If yes, should work.

  • Laszlo
    Laszlo
    14 July 2011 pm31 15:20 |

    Dear Petrut!

    First of all sorry for my english!
    I have since two weeks a unit with the following dates:
    Typ: 7501 (7")
    Ver: F35A-F35A-6025-100714(WinCE 6.0)
    ID: 03E2-80100723-281110-484E0242996D6D
    D0021 MAIN8904 100524A08 1
    VW01 Aug 7 2010

    A.)The unit is fine and nice, but i have two problems:
    1. The navi-sound mutes all voice (band,usb,cd,etc)and they come back a few seconds later.
    2. It isn't in the unit TMC.
    My question, whether there is a solution to these?

    B.)I really like your blog, where I found your "Wince6-Wifi and 3G patch files". I have in this context the following questions:
    3. Will they work on my unit?
    4. Can i back to the orig. system in anytime? (because of the guarantee)
    5. Can i hear the sounds (navi, radio, sd, cd, etc.) after the patch parallel? (no mute!)

    Thank you in advance for your response and
    sincerely from Hungary

    Laszlo

    • Petrut
      Petrut
      14 July 2011 pm31 15:29 |

      A)1. is normal for that unit, nothing i can do
      2.most of them don`t have tmc, there are different boards.

      B)3 yes
      4. yes
      5. no

  • Peter V.
    Peter V.
    14 July 2011 am31 08:57 |

    Hi Petrut,
    i ordered your patch and installed it on my GPS. It's working fine, but i have 2 question:
    On my board (Nowada 2450, N117 V6 WinCE6 800x600)is still the chinese firmware. Do you probably have an english one, or can i install n117 v3 or v4 on it?
    Does the USB mod work on this board as usual (same pins)?
    Thanks in advance and best regards,
    Peter

    • Peter V.
      Peter V.
      14 July 2011 am31 09:44 |

      sorry, of course it's 800x480 :-)

      • Petrut
        Petrut
        14 July 2011 pm31 15:26 |

        usb mod will work fine, follow tutorial.
        No english firmware for your unit, sorry.
        Don`t even try to install firmware from other versions...

        • Peter V.
          Peter V.
          15 July 2011 am31 07:54 |

          What does the flashing red LED mean? Is it a message
          for a failure of the GPS board?

          • Petrut
            Petrut
            15 July 2011 am31 09:34 |

            red led on gps board means that is running fine. If no led, or is always on ( red), gps board is dead.

            • Peter V.
              Peter V.
              15 July 2011 am31 10:29 |

              Sounds good :-)
              Your patch is working pretty good on this board and USB Mod too. The only problem i actually have is TMC reception with the
              onboard RTM6000. Antenna connected, but no signal. But I'm
              sure I'll find a solution :-)
              Thanks and have a good weekend!

  • Peter
    Peter
    12 July 2011 pm31 14:14 |

    Hi
    I purchased the patch yesterday and have installed it
    I also have IGOprimo. It might sound silly but were do you place it on storage card so icon picks it up and what name does icon look for
    thanks

    • Petrut
      Petrut
      12 July 2011 pm31 17:01 |

      anywhere on sd, and edit igo icon iphone menu, info in readme.

      • Peter
        Peter
        13 July 2011 pm31 15:07 |

        Thanks Petrut
        I have the folder in the root directory of the storagecard,it is called primo.
        I cannot find the \ key on the keyboard, only a /
        I think the correct syntax is \storagecard\primo\primo.exe
        is that correct and if so where is the \ key.
        can you tell me what keyboard will work with the installed drivers to make life easier
        sorry to be a pain
        peter

        • Petrut
          Petrut
          13 July 2011 pm31 16:38 |

          long press on / and other signs will appear, slide to the one you want. or you can change the keyboard from keyboard menu in bottom right corner.

          • Peter
            Peter
            13 July 2011 pm31 19:12 |

            Thanks again Petrut
            Thats the answer Now working,will be back soon for wifi patch.
            peter

  • SteveG1
    SteveG1
    11 July 2011 am31 01:04 |

    Hello Sir,

    This is very interesting indeed.

    At the moment I'm a little unsure what it is you actually provide i.e. is it the software only?

    So at this point I would be grateful if you could email me the full cost of all software and hardware to incorporate your upgrade into my system making the internet and a working desktop available on my head unit.


    My exact system is the 1 shown here
    http://autogpsdvds.com/index.php?route=product/product&path=48&product_id=72

    Kind Regards
    Steve

    • Petrut
      Petrut
      11 July 2011 am31 08:17 |

      sorry, internet is not available for your unit, usb mod can`t be done...
      wincepatch is working fine.

  • jaitower2
    10 July 2011 pm31 13:42 |

    Hello. I have a radio 1 din for renault megane III. Can i update the original firmware?. the firm that you have, is installed on the sd card?. I control the radio from the steering wheel, can I lose control from the steering wheel with your firmware?. my radio is nowada 2450 with wince 6 and 800x480 resolution. thanks

    • Petrut
      Petrut
      10 July 2011 pm31 17:12 |

      the patch will tweak only the gps side ( board ), everything else will remain the same. My patch is installed on internal memory and sd, 99% is on sd.

  • mariox26
    mariox26
    09 July 2011 pm31 17:10 |

    Hello Petrut,i have this radio:

    Winner
    SMDK2450 Board 5.0
    Windows CE 5.0.1400
    105 MB RAM
    ARM920T S3C2450 (400 MHz)
    480x234 pixels,65536 colors
    --------------------------------------------------------------------------------------
    Data: 31,9 MB =84kb used 31,9 mb free
    FlashDisk: 665 MB= 40,6 mb used 625mb free

    it's working your patch?i am verry interesting for this patch like in video and is have wi-fi?thank's
    you are romanian guy?

    • mariox26
      mariox26
      09 July 2011 pm31 20:18 |

      my model is SOUNDTON NAV-10 and another problem i want something setting for display like brightness if is possible,thank's

      • Petrut
        Petrut
        10 July 2011 pm31 17:10 |

        item no 9 from wince 5 section will work. No settings for display on wince 5 units.

        • mariox26
          mariox26
          11 July 2011 pm31 18:46 |

          For me work internet or usb mode?i waiting for your answer

          • Petrut
            Petrut
            11 July 2011 pm31 19:49 |

            no, sorry

  • Petrut
    Petrut
    07 July 2011 am31 05:58 |

    sorry for the downtime these days, i changed hostimg to something reliable !

  • TheUnfairlane
    TheUnfairlane
    03 July 2011 pm31 19:10 |

    I am enjoying the patch for the most part. I have some issues with settings persisting after powering off my unit. The most frustrating of these issues is with the Nitrogen Player, which is actually the main reason I opted for this patch in the first place.

    For example, any changes I make in the settings dialog of nitrogen are not saved after the unit is turned off then turned on again. This behavior seems to persist through most applications.

    How can I resolve this?

    My other main problem is getting nitrogen to display my album artwork, I've tried everything, with no success.

    If I could work out these two issues I would be a very happy customer.

    Thank You!

    • Petrut
      Petrut
      03 July 2011 pm31 20:19 |

      about nitrogen settings, this shouldn`t happen. Please download latest data files for your patch from the link in the readme, if you are an older customer, before 8.1 patch, and replace nitrogen folder.
      The album art is easy:
      1) Image file with the same filename as the song file (e.g. "\Music\Coldplay - Clocks.jpg" for "\Music\Coldplay - Clocks.mp3");
      2) Image file containing the album name (ID3 tag) (e.g. "\Music\*Viva la Vida*.jpg" for a song which ID3 tag for album name is "Viva la Vida");
      3) Image file inside the folder which one of these filenames: "Folder.jpg", "Cover.jpg", "AlbumArt.jpg", "AlbumArtSmall.jpg".

  • Band3ras
    Band3ras
    03 July 2011 pm31 14:47 |

    hi petrut,

    what is your email address? its not mentioned anywhere in your website. i need to send you the deviceid.txt file back to you.

    I suggest you add that to your readme file, otherwise you'll have others like me trying to follow the instructions but are not able because they cant find your email address..

    thanks in advance

  • Mart
    Mart
    01 July 2011 pm31 13:32 |

    Hello,

    my card is Nowada 2450 N117 PCB V6
    TMC RTM-6000
    Screen Resolution 800x480
    WINCE 6.0

    Will your patch work with my radio?

    --Mart

  • Lauren
    Lauren
    01 July 2011 am31 11:52 |

    Hello
    I have a Chinese no name double din unit and am having trouble loading the igo maps into it. It seems to read the SD card and show the path but wont load. Firstly, do you have a patch for a SAcGM1001 and secondly, will your patch help solve my problem? I'm in Australia.
    Thanks
    Lauren

    • Petrut
      Petrut
      01 July 2011 pm31 12:11 |

      sorry, NO to both questions... Try to find another igo release.

  • Mark Swain
    Mark Swain
    30 June 2011 pm30 19:04 |

    I just bought a 2004 BMW X5 and about to install the Dynavin E39 system. I want to integrate my iPhone 4 for internet access and whatever else cool things these two devices can do... Can you give me the latest on how to utilize 3G or Wifi or anything else?

    • Petrut
      Petrut
      01 July 2011 am31 05:31 |

      e46forums.com, there is a special thread with a lot of info , also videos, etc.
      Also there is video on mainpage of this site and description in patch details.

  • jcoltatg
    jcoltatg
    25 June 2011 pm30 12:47 |

    This question was because Tomtom icon available in wincepatch demo.
    I have search everywhere but today there is no working Tomtom release for my Nowada wince 6 unit.
    Thank you anyway.

  • fabrizio
    fabrizio
    24 June 2011 am30 09:58 |

    I tried to install the patch but I have one error .
    Missing file. I unzip "nwd2440_CE5_480x234.rar" in my SD card.
    There is only wincepatch folder with all file that I decompressed.Please help me
    REgards

    • Petrut
      Petrut
      24 June 2011 pm30 14:33 |

      make sure the archive will decompress without errors. If have errors, download again. Also download data files as instructed in the readme file from main archive.

      • fabrizio
        fabrizio
        26 June 2011 pm30 19:55 |

        No errors in decompress phase.

        With RES_INFO:
        NEVADA_2440 , MESADA_2440 Multiplatform 5.0 , Windows Ce 5.0.1400 - ARM920T , S3C2440 (385Mhz) , 480x234 (65k).
        During installation I receive "Data File missing.Please read the readme.doc ..."
        With explorer.exe I find :
        Folder - "Application Data"
        Folder - "CAM_DATA"
        Folder - "My documents"
        NWDFlash - "Voices" Folder with "Collected" file and "touchcali"(file),"ttmobile"(file),"ttnavigator"(file)
        Folder - profiles
        Folder - Programs Files (no files or folder)
        Storage card
        Folder - Temp (no files or folder)
        Folder - Windows (with various file and folder)

        Furthermore In my Maisun radio I find (( in a screen similar to your number 6 patch WINCE5):
        ID 4468-80081215-1F3F10-384E57-2D7C7871
        Ver. : D097-B21A-5009 ( windowsCe 5.0)
        Mem Storage: 40936 kb
        Avail Mem: : 36412 kb

        Please help me
        REgards

  • jcoltatg
    jcoltatg
    24 June 2011 am30 06:22 |

    Hi Petrut
    I have a NOWADA 2450 N117_PCB_V5 with win CE 6 and
    I am really interesting by your patch.
    My question is about Tomtom Navigator, it doesnt work with my Nowada, he start but I get a message "not enough memory".
    If Tomtom Navigator run with your patch I will order it, so tell me please.
    Thank you.

    • Petrut
      Petrut
      24 June 2011 pm30 14:29 |

      will not help your tomtom issue, you need to find another tomtom release. I can`t help.

  • lorridao
    lorridao
    20 June 2011 pm30 20:43 |

    Hi Petrut,

    I have a problem with the USB wifi pen. when I put on the Edimax EW-7711UMn de winc return me this:

    http://imageshack.us/photo/my-images/13/img0791ds.jpg/


    "Unidentified USB Devie - Enter the name of the driver for this USB device:_____"

    Can you help me?

    I installed, winchack, wifipatch an wifiupdate

    • Petrut
      Petrut
      21 June 2011 am30 05:02 |

      send me an email, tell me what unit you have, wince version ( 100% check it ) . As i can see from your screennshot the wifi is not installed. No browser icons on desktop.

  • Bamoah
    Bamoah
    19 June 2011 pm30 14:36 |

    Hey How do I use the .net 3.5 ?

    I need it to work for a sertain application. If I start the aplication it says it cannot run it needs .net 3.5. I looked in the program files, .net is there how do I make sure the system knows its there and use it for my application to work ? Its the tomtom audio fix, it needs .net 3.5 to work. Please advise, I have Wince patch 8.2 up and running.

    • Petrut
      Petrut
      19 June 2011 pm30 15:25 |

      .netcf was removed from wince 6 patch due to some issues on some devices.
      if you want it, email me from the email adress used to pay and request a .netcf enabled patch.

  • Murat
    Murat
    19 June 2011 pm30 13:40 |

    Hey Petrut
    I cant get Remote desktop to work
    When i open the Remote desktop on the dynavin
    The keyboard is Not coming up so i cant write anything
    Can you guide mé set it up tanks again for erffort in This!

    • Petrut
      Petrut
      19 June 2011 pm30 14:25 |

      already covered on forums, set taskbar always on to access keyboard in internet applications.

  • roberto
    roberto
    19 June 2011 am30 03:35 |

    hi, i have this unit: http://cgi.ebay.com/dash-GPS-car-pc-Car-dvd-player-Surf-Wifi-3G-Internet-/150607429005?pt=LH_DefaultDomain_0&hash=item2310e6fd8d

    but my unit is 2 years old so i dont have that interface, i would like to know if your wifi patch works with my unit, this is the information i got from the unit:

    platform_oem
    platform_type 5.0
    windows ce 5.0
    95.0mb ram
    arm920t s3c2440a(405mhz)
    800x480 pixels,62236 colors

    and i would like to know if can i solder the usb port to my unit, this one have one, but the sd cards boards is burned, so doesn work. thanks

    by the way i can acces to the windows ce without problems.

    • roberto
      roberto
      19 June 2011 pm30 16:53 |

      what a bad notice, i know that this new units accept wifi usb dongle, so i thing theres a way to configure it, do you have some patch or program to modify the firmware? do you know also how to know if can i solder a usb port to my gps? thanks alot

    • Petrut
      Petrut
      19 June 2011 pm30 14:23 |

      no, patch doesnt work, also can`t solder usb, i don`t know thw right pins, sorry.

  • Murat
    Murat
    18 June 2011 pm30 18:08 |

    Hey Petrut i just installed the wifipatch
    Its working great fuck am so happy thank your the Best
    But when i go to youtube.com i cant see videos because
    Flash is Not installed i and cant upgrade because
    It Not possible for my operating system i have wince 5.0
    Please help mé get flash working

    • Petrut
      Petrut
      18 June 2011 pm30 18:22 |

      not possible to see youtube flash videos on wince, 5 or 6.
      Never ever, sorry.
      This is discussed already on so many forums...

  • Murat
    Murat
    18 June 2011 am30 08:04 |

    Hey Petrut

    i have sent the deviceID.txt last night when will you send futher instructions to install the wifi-patch on my dynavin?
    you allso work in the weekends? or are you first back on the job on monday? sorry for many quistions!! but really can't wait to setup the internet in the car :-)

    • Petrut
      Petrut
      18 June 2011 am30 10:43 |

      for my customers i work all the time :)
      check mail !

  • Peter V.
    Peter V.
    17 June 2011 pm30 18:38 |

    hello petrut
    i have a unit with this system information:
    BSP Version: AIVCE6_NANO_Rel1.03
    AT8X0 6.0
    Windows Embedded CE 6.0.3122
    118 MB RAM
    ARM1136JF-S AT840
    800x480pixels, 65536 colors
    wich patch can i use?
    It is an Erisin ES862D 2 DIn Radio

    Thanks and best regards,
    Peter

    • Petrut
      Petrut
      17 June 2011 pm30 20:23 |

      you can try wince 6 for 7608. If will not install,i`ll make a custom one for you, just need the info from tutorials.

  • jomidalgo
    jomidalgo
    17 June 2011 pm30 16:19 |

    Hi, Petrut, I wonder if you have found any solution for the speakers issue with win CE, I`ve been looking on several forums and the only answer that found was a change in the main menu of the gps-radio (on the SOUND configurarion, unchecking the navigation audio option), but sadly mine doesn´t have that option....on the other hand, in my radio, will it be impossible to get a link between the winCE and usb port??......I should stop searching info about it??
    Sorry for so many questions....

    • Petrut
      Petrut
      17 June 2011 pm30 17:21 |

      the sound option is not available on all units, sorry.
      About usb, you can`t do usb mod on your board. Or at least i don`t know how to do it...

  • jomidalgo
    jomidalgo
    17 June 2011 am30 03:43 |

    Sorry, I should read the tutorials first, anyway already running the patch in my gps radio (samsung, smdk 2450, win ce 5.0).........awesome, perfectly working thanks, you save me a lot of time....i´ll be in touch

    • Petrut
      Petrut
      17 June 2011 am30 06:09 |

      thanks for the feedback. Enjoy !

  • jomidalgo
    jomidalgo
    16 June 2011 pm30 22:10 |

    I recently bought an oem radio with no serial, labels or anything, but surfing the web found a picture equal to my equipment and the model is CAV 8062, I´m trying to get a better look for it (wolfncu on wince 5.0) but it´s been impossible to get something really good, so if you can help me, that would be great,
    thanks in advance

  • John
    John
    15 June 2011 am30 11:15 |

    I have the Dynavin E9X unit with WINCE 5 and half of my menu is in chinese? Will the patch fix the English or do I need to run a firmware update first. Also, I have a Motorola Atrix and I am interested in the 3g patch, will that phone work?

    • Petrut
      Petrut
      15 June 2011 pm30 13:15 |

      the patch will fix most visible menus, but also come with firmware for reflash. Wifi patch will work with your phone and will allow you to use the internet data plan from your phone, also same browsing speed...

  • AleX
    AleX
    14 June 2011 pm30 19:42 |

    I bought the patch for Wince ANY Nowada 2450 device when I start Desktop minimizes what he does or can the time?
    I Witson Mazda3 screenshot http://imageshack.us/photo/my-images/835/imag0007o.jpg

    (sry for my english)

    • Petrut
      Petrut
      14 June 2011 pm30 19:46 |

      sorry i really don`t understand the question...

  • John
    John
    13 June 2011 pm30 19:06 |

    Hello,
    I have what looks like a SKG17A1 board inside my disassembled all in one chinese gps/bluetooth/tv/dvd players. can you tell me if it is possible to run your patch, if so which one?
    Also on the GPS board can you tell me which pins would be the correct for the USB mod, to get wifi?

    I can email many pictures, and will reply right away, please contact me back and I will be a happy customer, will recommend to all friends of mine, and even donate extra for your help plus buy both patches.

    Let me know if you need anything else,
    Thank you again.

    • Petrut
      Petrut
      14 June 2011 am30 05:13 |

      i can build custom patch for your unit, but because you have only 40 mb ram, you`ll not be able to use iphone menu and GPS programs at same time, also forget about wifi, that one will take 15-20 mb all time.
      Also usb mod is not possible on your unit.
      Sorry.

    • John
      John
      13 June 2011 pm30 19:21 |

      I forgot to mention the specs,
      Product ID:SACGM1001-V4.0.7
      System Version: V4.0-2009/12/21
      Request Serial Number

      RESINFO
      System-
      -RIZETECH
      -RT GPS
      -Windows CE 5.0
      -39.1 MB RAM
      -ARM ARM920
      -480x272 pixels, 65536 colors

      Memory
      -Program Memory 37.1MB
      -17.4MB Used
      -19.7MB Free
      -Storage Memory 1.99MB
      -692KB Used
      -1.32MB Free

      Storage
      -Nand Flash 27.9MB
      -12.9MB Used
      -15.0MB Free

      -SDMMC 7.40GB
      -631MB Used
      -6.79GB Free


      The sticker on the board on top says:

      SACGM1001
      20100416
      V4.0.7

      And below that sticker,
      GPS MODULE
      SKG17A1
      And read the barcode numbers, above sticker covers it.

  • Alex
    Alex
    13 June 2011 pm30 12:29 |

    I have a question works with patch Witson equipment www.witson.com

    • Petrut
      Petrut
      13 June 2011 pm30 17:12 |

      with most units yes.

  • kalle
    kalle
    07 June 2011 am30 10:02 |

    Hi!
    I want to buy wince patch.
    I have an erisin es966d.
    http://www.padphone-world.com/2-Din-Car-DVD-Player/-/Erisin-ES996D-7-Audio-Player-GPS/2011032401034689519.html
    I soldered usb cable to gps-board and thumbdrive shows up as descibed in tutorial.
    Resinfo shows:
    BSP Version:AIVCE6_NANO_Rel1.03..
    AT8XO 6.0
    Windows Embedded CE 6.0.3122
    118MB RAM
    ARM1136JF-S AT840
    800X480 PIX 65536 COL.
    Do you have a suitable patch or do you need more info?
    Kalle

    • kalle
      kalle
      07 June 2011 pm30 12:13 |

      Edit: I do not get thumbdrive to show with cecmd.exe.
      Any known issues with Erisin board?
      Very similar gps-board as on tutorial page.
      /kalle

      • Petrut
        Petrut
        07 June 2011 pm30 13:29 |

        you said you get flashdrive then you don`t get it in total commander, how is it after all? Try a usb device, like wireless adaptor, modems, etc, see if system ask for driver in gps menu. Or a flashdrive with a led, see it led is powered.
        You can buy the wince 6 patch for as7608, and if is not fully working i`ll build a custom one for you.

        • kalle
          kalle
          07 June 2011 pm30 19:14 |

          Thougt it was workin, but it was the gps sd-card that i saw.
          Light is flashing on thumbdrive and also on a bluetooth-stick i tried, but win-ce doesnt seem to recognise it.
          Only need win-ce if i can get wifi to work.

          • flap
            flap
            05 August 2011 pm31 13:54 |

            I am about to get this device to and I would like to know if you got wincepatch to apply on it?
            I'am interested by this nice sowftware tool...

          • Petrut
            Petrut
            08 June 2011 am30 10:37 |

            if is nowada board, usb mod should work. Check cable soldering, also use a quality shielded cable.

  • DMoreno
    DMoreno
    02 June 2011 am30 05:47 |

    Hi Petrut,

    Excellent Application (I bought it last week), My Dynavin E46 V5 runs excellent!. I have a question/problem:

    I am having the Gapi pop up in Igo Primo and I solved temporary copying a gapi.dll and GX_HPC.ini directly into the Primo Folder, because my unit was not saving the Gapi set up regarding the Audi Unit instead of the E46 unit. should I do something special to keep the gapi set up everytime I turn off the unit?
    Another issue: my task bar is hidden and I cannot reach it neither with a stylus nor with my finger so I have to connect a external keyboard to access it, then I untick the option to hide it but when I reboot the unit, it is hidden again. do you have any suggestion?

    Regards,

    • Petrut
      Petrut
      02 June 2011 am30 08:20 |

      Use system tools app and you'll solve both problems.

  • orizzonta
    orizzonta
    31 May 2011 am31 08:14 |

    Hi Petrut,
    I've installed your patch on my Dynavin DVN-MLMB for Mercedes ML (version V5). Everything works fine.

    The only issue is that when I use Igo8 (or any other navigation program) navigation sound comes out from all speakers instead of coming out from front speakers only.
    I've tryed to change navigation program settings, but without success.

    When I bought the unit the Dynavin site said that the unit had the Dual Zone function.

    Can you help me?
    Thanks

    • Petrut
      Petrut
      31 May 2011 am31 11:42 |

      i can`t help, but i`m sure that on dynavin the sound output can be changed to all speaker or front only, for wince sounds. Search on dynavin forums, on e46fanatics.com, etc

  • Mircea Bagaian
    Mircea Bagaian
    30 May 2011 pm31 19:00 |

    Petrut sa-mi dai de veste daca ai indentificat placade baza daca nu o sa-l desfac si sa fac niste poze poate it vine mai usor asa, sper sa se poate adapta un port USB.

    • Petrut
      Petrut
      31 May 2011 am31 07:48 |

      Nu se poate pune USB pe ea, cel putin din câte știu eu.
      Îți recomand sa îl desfaci si sa îmi trimiti poze cu pinii.

  • Sven
    Sven
    29 May 2011 am31 08:11 |

    Hello Petrut,

    i whant to buy me next week for my Mercedes following Dynavin device: http://www.dynavin.com/products/product_dnv_mbe_most.php in the german version. I whant to use the internet function for checking and writing emails and a navi sw that can use live services out of the internet.

    What all i need from you:
    - WinCE 5 patch
    - English Firmware
    - WiFi Patch
    - 3G Patch

    Is it possible that i install these patches with medium know of windows?

    How the Dynavin gets WiFi feature? I need a Wifi usb stick to connect to the usb ports? Or did Dynavin have WiFi in its device? What stick will work for me i can order in germany? ( I habe AVM and Draytek stick). If is use a direct 3G usb stick, what model will work? (i have a Vodafone Huawei K3565-Z).
    Where i can get the iGO Primo Navi sw?
    Many questions, perhaps you can answer some.

    Thanks
    Sven

    • Petrut
      Petrut
      29 May 2011 am31 10:35 |

      you need wince 5 patch ( or 6, maybe your unit will come with wince 6, check it before ordering patch ), wifi or 3g patches, depends what you want to use. Wifi works with an adaptor. ONLY supported wifi adaptors are the one lised on my site. 3G modems, huawei will work but not K series, need E series, e1550, etc.

      • Sven
        Sven
        29 May 2011 pm31 18:53 |

        Hello Petrut,

        Thanks for the fast answer. I will buy a listet one WiFi Dongle, thanks! I have orderd my Dynavin DVN-MBE-MOST at the moment ;-)
        Will the original Dynavin UMTS Modem USB-Adapter work on the USB connection to the Dynavin with the WinCE hack?

        Original Dynavin UMTS-USB Dongle: http://www.dynavin.de/network.php

        When not you have a list of supported UMTS dongles?

        Thanks
        Sven

        • Petrut
          Petrut
          29 May 2011 pm31 19:03 |

          original dynavin modem will work, of course. Any modem should work if it ask for driver in wince mode, read info on 3g patch. Huawei E series recommended.

  • Mircea Bagaian
    Mircea Bagaian
    28 May 2011 am31 04:37 |

    Petrut, timite-mi si mie patch-ul care trebuie si spune-mi te rog daca merge pe chinezaria asta sa deblochez portu din fata miniusb sau sa adaptez un port USB pe placa sa-mi pot pune wifi/3g.
    Multumesc anticipat.

    • Petrut
      Petrut
      28 May 2011 am31 09:14 |

      trimite-mi poze cu partitiile in total commander, lista de procese in itaskmanager si poze cu meniul principal in radio si gps. Asa pot sa identific placa mai bine. Slabe sanse sa pui usb pe ea daca nu e nowada.

      • Mircea Bagaian
        Mircea Bagaian
        29 May 2011 am31 09:58 |

        ti-am trimis email cu pozele.

  • Petrut
    Petrut
    27 May 2011 am31 05:09 |

    @genesic, wd6050 is on their site, www.szwaywell.com, email them and buy it, wd6050 is vw only. My patch will work on any waywell unit.
    @pablo, tracking is not available for wifi patch, because system is not connected all time to internet and automatic connect at boot is not possible, sorry. I can give it to you but will not work properly...
    @mircea, ma bucur ca ai rezolvat :)

  • Mircea Bagaian
    Mircea Bagaian
    27 May 2011 am31 01:19 |

    Salut.
    Am downladat si eu pe data de 16/1/2011 nwd2440_CE5_800x480_new.rar de la tine dar nu a mers ca nu era ce-mi trebuia si mi-ai trimis altul care dadea o eroare si se oprea din instalare. Nu te-am mai deranjat pt ca acuma am reusit sa intru in el si sa redenumesc fila care am modificato de nu mai pornea si-mi cerea firmware update.

    2 Din Gps Dvd OEM AS7145

    SMDK2450 BOARD 5.0
    WINDOWS CE 5.0
    58,7 MB RAM
    ARM920T S3C2450 534 Mhz
    800x480 Pixels, 65536 Colors

  • pablo
    pablo
    26 May 2011 pm31 23:40 |

    Hi Petruts I have the Wifi patch, now how can I test the tracking function

  • Genesic
    Genesic
    26 May 2011 pm31 15:28 |

    Hello, I am about to buy a Waywell unit. I have searched everywhere for the WD6050 available to purchase but canonly find the WD6045 and the WD 8949 located here: http://www.aliexpress.com/store/902193/209398836-446739187/Special-Car-DVD-player-For-Audi-A3-with-original-steering-wheel-control.html
    Can you tell me if Wince will work with the WD8949 or the WD6045? I would REALLY like to get it for one of these units!
    Thanks

  • Petrut
    Petrut
    20 May 2011 am31 04:57 |

    @serg, you bought wrong patch!!! Why don't you read tutorials before? I'll replace the patch in your account with right one. You can send me firmware that works on your unit if you have it. Thanks

    • serg
      serg
      20 May 2011 am31 05:13 |

      Thanks!
      I read the tutorial. But for some reason thought that the patch number 5 - for me. Hurry. In the evening, try the new patch.
      Thanks again!

  • serg
    serg
    19 May 2011 pm31 16:24 |

    Hi! At me it is some questions:
    - COPY the Program Files folder from the data800x480 folder to WINCEPATCH folder
    Where there should be a folder??
    - this version ( 8.1 ) must be installed over the old version.
    - Where to take the old version???

    • Petrut
      Petrut
      19 May 2011 pm31 17:10 |

      if you dont have an older version just install it as it is. That message is for older customers that want to upgrade.
      Read instructions carefully, extract all archives and will install correctly.

      • serg
        serg
        19 May 2011 pm31 17:58 |

        Excuse me. But at me the same
        i have this model:
        Mesada_2440
        Mesada_2440 multi-platform 5.0
        Windows CE 5.0.1400
        40.9 MB RAM
        ARM920T S3C2440A (385 Mhz)
        800x480 pixels,65536 colors

        i get this error when installing:
        Couldnt create directory'\ResidentFlash\$MSD$'

        Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
        MkDir("\ResidentFlash\$MSD$$")

        • serg
          serg
          19 May 2011 pm31 18:06 |

          In the device there is a folder \'NwdFlash \$ MSD $'

          • serg
            serg
            19 May 2011 pm31 18:54 |

            replaced in install.mscr ResidentFlash on NwdFlash. received the black screen. Your patch doesn't work on our devices. Though a picture same. I can send you an our Firmware.

            • Sven
              Sven
              08 June 2011 pm30 20:25 |

              Hello,
              I have the same Model and the same issue.
              Any idea how I can get it revitalised?

  • Takim
    Takim
    19 May 2011 am31 10:16 |

    Hi Petrut,
    I have N117 board on my head unit. Accidentally i've made a mistake. Seem like the bootloader is corrupt.
    Is your patch able to restore the bootloader ?

    • Petrut
      Petrut
      19 May 2011 pm31 12:56 |

      you need to reflash firmware. I can provide firmware for many n117 wince 6 boards but i can`t guarantee that will recover your device. You can request firmware files after you get the patch.

      • Takim
        Takim
        20 May 2011 am31 02:02 |

        Currently when i press GPS button on my HU, the screen displays "No Signal message". Is it possible to reflash using sdcard ? I've tried several times and seem like the module didn't read the file stored in the sdcard.

  • remarkable
    remarkable
    18 May 2011 pm31 22:50 |

    Petrut can you help me? My double din unit can't access the "console " screen. I'm unable to use gps or the menu. If I do the usb hack will I be able to reset my unit.and get functions working again? I have links of picture and video of what goes wrong.

    • Petrut
      Petrut
      19 May 2011 am31 08:38 |

      send an email with details

  • Manny
    Manny
    17 May 2011 am31 00:27 |

    hi i have tried to install patch with no success. i have this model:
    Mesada_2440
    Mesada_2440 multi-platform 5.0
    Windows CE 5.0.1400
    40.9 MB RAM
    ARM920T S3C2440A (385 Mhz)
    800x480 pixels,65536 colors

    i get this error when installing:
    Couldnt create directory'\ResidentFlash\$MSD$'

    Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
    MkDir("\ResidentFlash\$MSD$$")

    i am stuck there.

    • Petrut
      Petrut
      17 May 2011 am31 06:01 |

      you need item no 5 from wince 5 section, and i see you bought it. It should work now...

  • DocBoro
    DocBoro
    16 May 2011 am31 09:12 |

    Yes, I'm realy stupid, I found the link in "README FIRST" file in the patch. I'm very sorry, Petrut.

  • DocBoro
    DocBoro
    16 May 2011 am31 08:43 |

    Petrut, I sent you 2 messages about "data 480x234" and you tell me :Read instructions, there is link for data files, but I can not find THIS link! After enter to my account I can re-download the patch nwd2440_CE5_480x234.rar (4,6Mo) but I can not find the link for data. Am I stupid...??? or it's maybe hide? Please help me!

  • Petrut
    Petrut
    14 May 2011 pm31 12:10 |

    Pablo, yes, can be used with my 3G patch.

  • pablo
    pablo
    14 May 2011 am31 08:19 |

    Hi Petrut, I have one Dynavin HSUPA 3G modem from one VW unit, I wonder if I can reuse it with your 3G patch for one WINCA WINCE6 unit ?
    RGDS
    Pablo

  • Dave
    Dave
    12 May 2011 pm31 21:48 |

    Hi Petrut,
    It you could write a custom patch for 480x234 and wince 6 that would be great thanks.

    Dave

  • Petrut
    Petrut
    12 May 2011 am31 06:07 |

    @mauricio, change your navigation program,use igo or something else that have full support for 800x480 screen, nothing is wrong with the unit. The Bluetooth screen is normal too.
    @Maurice, all firmwares i have in my patch are 800x480 so is not possible to have a lower resolution screeen. If the image have now black bars around it, use main shell gps settings to play with size and position.

  • Maurice
    Maurice
    11 May 2011 pm31 21:22 |

    I did the English v3 firmware update for my dynavin DVN-MBC, after the install i seem to have lower resolution on my navi screen. I followed the instructions thoroughly. What could have caused this, and how do i fix it?

  • Mauricio
    Mauricio
    11 May 2011 pm31 16:37 |

    Problem resolution WD6050

    Nowada 2450
    WinCe 6.0 800x480 65536 colors

    Picture:
    https://picasaweb.google.com/104576022403941988731/ResolutionProblem#

  • Petrut
    Petrut
    11 May 2011 am31 09:39 |

    @mauricio, post a picture...
    @lynx, yeah, easy to find, just set taskbar on. There is a setting in tweaks too.

  • lynx
    lynx
    10 May 2011 pm31 20:52 |

    Hi Petrut,
    I have the following question about wi-fi'patch:
    On desktop mode if I want to connect to network which is known Network Key, how can I call a virtual keyboard?
    Is there a way to activate the virtual keyboard?
    Wherever I need to write the keyboard appears, but in the netwok key box does not appear.

    • lynx
      lynx
      10 May 2011 pm31 21:25 |

      PS:
      I found a way how to do!

  • Mauricio
    Mauricio
    10 May 2011 pm31 12:15 |

    I have a problem with my WD6050, seem to be a problem of resolution of the screen. In the listings of GPS, the lines are assembled with each other, and the buttons in the top of the screen overlap the screen making uncomfortable use it. Please let me know, if you patch will fix this problem?

  • Petrut
    Petrut
    08 May 2011 pm31 21:22 |

    there are patches for 480x234, see wince 5 section. If you have wince 6, i`ll build a custom one for you if you need it. Some programs will not work in 480x234, so are removed from patch ( naviplayer, etc ).

  • Dave
    Dave
    08 May 2011 pm31 12:57 |

    Hi, can you tel me if there will be a patch for the 480 X 234 to sort out the screen size problems?
    Thanks

  • Petrut
    Petrut
    07 May 2011 pm31 15:21 |

    @Neil, my patch will not work at all on your unit type, sorry.

  • Neil Adams
    Neil Adams
    06 May 2011 pm31 20:44 |

    Hello
    I have had my unit for over a year and it has worked well
    Recently the unit has some problems it will not play video off the USB stick ... shows vo filter missing /error
    Navigation shuts down occasionally
    Radio reception is poor
    RDS does not work well

    I have the VW Sagittar unit
    Device: Prima
    Description: Shenzen Roadrover Technology
    BSP Version: Prima CE6EVB- Rel 9.04
    TTX4X0 A6.0
    Win CE 6.0.3122
    RAM: 887.8Mb
    ARM136JF-S TT4XOA
    800 X 480 pixels 65536 colours
    MCU 3.35 VM-5N81 - V1.15

    Does your patch install a new video player? will it help my radio reception?

    Is there a package price for the wireless patch and the Win 6 patch?

    Thanks
    Neil C. Adams
    neil.adams@ualberta.net

  • Petrut
    Petrut
    06 May 2011 am31 05:59 |

    @Guilherme Taliba, run the tools from tutorials ( rezinfo, itaskmanager and total commnander ) and tell me partitions names and processes and send all info to my email. Iphone menu can be launched at boot automatically if your navi system have the option to run the navi exe automatically...
    @deadwiz,will be possible in next release, i`ll add a tool to add any program in startup, maximum 3 programs.

    • deadwiz
      deadwiz
      07 May 2011 am31 01:59 |

      Thanks. Still love this patch, still trying to find a way to get nitrogen to work out of the front speakers.

  • deadwiz
    deadwiz
    05 May 2011 pm31 18:09 |

    How could I add Nitrogen to auto startup with Wince just like the iPhone UI does?

    Thanks.

  • Guilherme Taliba
    Guilherme Taliba
    05 May 2011 pm31 14:28 |

    Hi There! Excelent Work! I'm Planning to Patch my Chinese Media Center, but first I need to check the compatibility using your application.
    I have a question about the Patch: What about TV? I have "1 seg - digital" TV working nice on its original state. Will TV work after the patch?
    Thanks a Lot!

    • Guilherme Taliba
      Guilherme Taliba
      05 May 2011 pm31 14:58 |

      Another Question: Can this "Iphone look UI" load automatically after turning on the device?
      Or I should always execute GPS navigation to bring Windows CE UI? Thanks@!

  • Petrut
    Petrut
    04 May 2011 pm31 17:04 |

    send me more info by email. Device type, model, and some pictures with the main menu.

  • Warren
    Warren
    04 May 2011 am31 09:32 |

    I have attempted to install wincepatch on my Mesada 2450, WINCE 5 Nowada 2450, WINCE 5

    Downloaded file "nwd2450_CE5_800x480.rar"

    I have followed the readme instructions and installation progress correctly I think. However after restart and going to the desktop the system crashes and reboots after a few seconds.

    At no point during installation did I get the window allowing me to disable auto start navigation. I am assuming this is the problem as it is trying to start the nav program.

    Can you please explain how to disable the auto start nav function.

  • Dave
    Dave
    02 May 2011 pm31 14:31 |

    Hi, I Purchased your WinCEpatch for my Xtrons TD716G and it
    works but all images are to big to fit the screen.
    I got the 800X480 Patch, can you help?
    Thanks

    Dave

  • Petrut
    Petrut
    01 May 2011 pm31 18:18 |

    @Soso, wince will be still in chinese, so some applications will not work. You can unsitall it at any time, and you`ll not lose original interface, the interface will be changed only in gps mode, not radio, dvd, etc. Patch no 8 from wince 5 section will work.
    @snoob , NO
    @Hej, not possible, is different hardware.

  • Hej
    Hej
    30 April 2011 pm30 22:32 |

    If I install the patch, will I be able to read content from the SD-media-slot in my WinCE5, and not just from the GPS slot?

  • SnOOb
    SnOOb
    30 April 2011 am30 10:52 |

    Other way to pay except PayPal???

  • Soso
    Soso
    29 April 2011 pm30 20:50 |

    I gues no? ok.
    I have a 2 din unit Xtrons TD714G,
    Mesada_2416, Windows Ce 5.0
    104 Mb Ram, Arm926EJ S3C2416, 534 MHz,
    800x400 pixels 65536 colours,

    which patch works for me? Will I lose my unit interface?
    If I want, can I uninstall the patch and the unit will be
    back to original? My WinCe will be in english? so i will have no problem with another programs "No compatible Language"?

  • Petrut
    Petrut
    29 April 2011 am30 11:24 |

    read instructions ? download and add correctly the data files.

  • Warren
    Warren
    29 April 2011 am30 00:38 |

    Petrut.
    I tried to install on my Mesada 2450 CE5 in dash 7" GPS but comes up Data files missing.Any help would be appreciated.

    Thanks.

  • Petrut
    Petrut
    28 April 2011 pm30 16:27 |

    yes, will work, make sure main exe file is named player.exe

  • lynx
    lynx
    28 April 2011 pm30 15:57 |

    Hi Petrut,
    In your patch there is TSPMP v.072 video player.
    I have TCPMP version 0.81 which is much better, works lightly and has advantages over the older version.
    My question is, if i replace the content in a folder SDCard / Program Files / Tcpmp whether it will work the new version?

  • Petrut
    Petrut
    25 April 2011 pm30 18:53 |

    @whymax, wincepatch will work on your unit, 100% safe, the one for 2450 boards will work. About wifi, unless your unit can access usb flash drives in wince side ( total commander for example, see tutorials ), there is no way to make it work, usb mod doesnt work on your unit.
    @YETB, just add the folder with the software on sd, and set the icon path in iphone menu, read instructions provided.

    • WhyMax
      25 April 2011 pm30 19:01 |

      Thanks, I'll try to install

  • WhyMax
    24 April 2011 pm30 19:15 |
  • YETB
    YETB
    24 April 2011 pm30 12:51 |

    Purchased your WinCEpatch for my in dash dvd -
    what is the procedure to install (add) another GPS unit to the system?

    My GPS has Sygic - and I'd like to add Igo8 to it.
    I'm not asking how to get Igo - I'm asking how to install it into the WinCE

    Thanks

  • WhyMax
    23 April 2011 pm30 22:11 |

    If all goes well, I'll write a review on my blog with a link to your patch, as well as write detailed instructions on the forums, automotive club, can I count on a discount?

  • WhyMax
    23 April 2011 pm30 22:02 |

    Hi, this is my device For Suzuki SX4:
    http://forum.clubsx4.ru/showpost.php?p=148466&postcount=491
    http://forum.clubsx4.ru/showpost.php?p=146857&postcount=465

    Nowada_2450
    NWD_2450 multi-platform 5.0
    Windows CE 5.0.1400
    122 MB RAM
    ARM926EJ S3C2450 (534 MHz)
    800x480 pixels, 65536 colors

    I want to install your patch WinCE 5 and WiFi Patch, will it work on my device?
    There is a risk that the device will not start?

    Could you send me detailed instructions on installing the patch before I buy?

    Thank you.

  • Orizzonta
    Orizzonta
    23 April 2011 am30 08:19 |

    I found the patch very useful for my Dynavin and I presented it on the Mercedes Benz Forum Club Italia.
    Petrut gave me a unique help in setting up the patch and the Internet connection on my unit.
    Many thanks Petrut and best compliments for your new site.

  • Petrut
    Petrut
    22 April 2011 pm30 21:14 |

    No, wince is a very basic system compared to winmobile, like win95 to win xp. But some ppc ( win mob 2003) will work, also some wm 5 apps if installed and tweaked right. You can search for ppc applications and games. Also flash games work, I'll add a tool to install them in next release.

  • Murat
    Murat
    22 April 2011 pm30 20:33 |

    Petrut, your wincehack is really awesome, installed in my E46 dynavin but i really want more games and programs, do you know where to download this?

    and is windows wince ce and windows mobile (wm) the same???

  • Petrut
    Petrut
    22 April 2011 pm30 20:03 |

    The sound issue is well known, is wince limitation on some units and some car sound systems. For example i don`t have it in my vw jetta with 8 speakers and also in audi a4 with bose system. You can try other wince media players or play with the settings in dynavin gps or main menus.
    About wince language, if you see a single chinese word, 100% firmware is chinese. English firmware is better, reflash, is no risk.

    • lynx
      lynx
      22 April 2011 pm30 21:01 |

      After a long long search in the forums, I found the decision for Dynavin units.
      Now all WinCE applications emit sound in all speakers and I am very glad of this.

      • deadwiz
        deadwiz
        05 May 2011 am31 04:34 |

        Could you please tell me how you got this to work? Or post the a link for where you found your solution?

        Thanks!

  • lynx
    lynx
    21 April 2011 pm30 21:47 |

    And another question:
    How can I be 100% sure ,do I have English or Chinese firmware?
    Many things in winCE are in English and some are in Chinese.
    I've already installed the winCE patch and I need confirmation that if I add the English language will i get a problem or not.

  • lynx
    lynx
    21 April 2011 pm30 19:40 |

    Hi Petrut,
    I installed winCE patch, my question is why the video player and MP3 player sound comes only from the front speakers?
    Did someone else had a similar problem?
    My unit is Dynavin DVN-MBML.
    All applications under winCE all sound comes only from front speakers.
    Whether this problem has a solution?
    Thank you!

    • treoelvis
      treoelvis
      07 August 2011 pm31 20:33 |

      hello Lynx,
      did u fix your problem with the speakers?
      i heve the same problem, i can hear sound on gps side and wince only from front speakers! how i can do it?
      Steve

  • Petrut
    Petrut
    19 April 2011 am30 06:02 |

    @Carlos, no 2 is the right one, patch for any nowada 2450 board.
    @murat, in iphone menu you need to set path for the icon ( igo primo ) to the primo executable. Read instructions about how to do that. No idea about bejewled2, probably not working on your unit or missing files, i`ll check. And yes, you need english firmware, there is no risk, that`s why is included with the patch for dynavin. And no need to reinstall wincepatch.

  • Oktay
    Oktay
    18 April 2011 pm30 23:45 |

    I installed today my wincepatch on dynavin v5. It works really great. Good job petrut.

  • Murat
    Murat
    18 April 2011 pm30 19:18 |

    Hey Petrut...

    I most thank you for this job you are doing this is really good stuff sorry for the english am from denmark

    I have download the wince hack and installed in my dynavin
    and it works great!!!

    but i have some problems with some things!

    1. i already have primo 1.2 on the sd card but when am in iphonetoday and i press the igo primo icon nothing happens?

    2: in iphonetoday i cant see the game bejeweled2 you know why?

    3. am getting errors in wince when changing things then the buttons with Y N is in chinsese is it because i need to install english firmware to get english langauge, i can brick the dynavin if i install the language package if i already did the wince hack ?

    Hope that you can help!!

  • Carlos
    Carlos
    18 April 2011 pm30 18:30 |

    hello
    i have a unit with this settings:
    mesada_2440
    mesada_2440 multi-platform 5.0
    windows ce 5.0 1400
    45.4MB RAM
    ARM920T S3C2440A (385Mhz)
    800x480pixels, 65536 colors
    wich patch should i use:
    Wince patch for Dynavin devices only ! Wince 5, Nowada 2450 ( Mesada 2440 ), 800x480
    or
    2. Wince patch for ANY Nowada 2450 device ( ex. AS7608, WD6050, CY7088, etc ), wince 5, 800x480
    Thanks
    Carlos

  • Petrut
    Petrut
    18 April 2011 am30 09:48 |

    Ed, please read tutorials section and run resinfo, then send me or post here the results. I can`t know what board is inside...

  • Ed
    Ed
    18 April 2011 am30 00:15 |

    Hi Petrut,
    I have this roadrover unit

    http://www.roadrover.cn/e/productshow.asp?id=301&mnid=19046&classname=首页滚动图片

    Is it possible to install the wince6 and WiFi patches ?
    Thanks
    Ed

  • Petrut
    Petrut
    16 April 2011 pm30 18:31 |

    @lynx, as you can see there is patch already done for ANY dynavin unit. Just buy it from wince 5 section, and buy wifi too.

  • lynx
    lynx
    16 April 2011 pm30 17:19 |

    Hi Petrut,
    This information is it sufficient for making a hack for WinCE 5.0 and wi-fi patch?
    http://img593.imageshack.us/img593/6482/16042011195a.jpg
    My unit is Dynavin DVN-MBML and is brand new.
    Regards

  • Petrut
    Petrut
    15 April 2011 pm30 17:00 |

    keep an eye on this site :), coming very soon.

  • Charlie
    Charlie
    15 April 2011 pm30 16:33 |

    Hey Petrut,

    Hows the 3G patch coming along, are you any closer to having a working setup? :)

  • Petrut
    Petrut
    14 April 2011 am30 06:38 |

    Yes, wince patch can be installed only from sd. USB gps is needed only for wifi or 3g

  • Oktay
    Oktay
    13 April 2011 pm30 23:43 |

    I dont have acces to my USB/GPS. is it possible to install the wincepatch using the sd card? (the glove for navigation)

  • Petrut
    Petrut
    12 April 2011 pm30 18:28 |

    wincepatch will work, wifi will not work, can`t add usb to wince on hualingan boards.

  • mikemc
    mikemc
    12 April 2011 am30 10:44 |

    will dynavin software with you software and patches work on a Hualigan ?

    thank you

  • Petrut
    Petrut
    09 April 2011 pm30 17:12 |

    wifi/3g is possible ONLY on nowada/mesada boards, and only by using a usb dongle, because on them you can solder a usb cable that can access wince...
    Built in bluetooth is useless, can`t be used from wince.
    Check your board type and reply..

  • Christian S.
    Christian S.
    09 April 2011 pm30 15:46 |

    Hi Petrut,
    just a question: I own 2 very normal navigation devices, which are based on win ce 5/6. It's no problem to open them to access explorer.exe, but I like the wifi/3g connection stuff you are offering.
    Will it be possible to use your wifi patch together with a wifi-sd card to access the internet over wifi tethering?
    Or will there be a possibility to access internet over built in bluetooth using my mobile phone's network connection?

    best,
    Christian

  • Petrut
    Petrut
    09 April 2011 am30 06:12 |

    i don`t know the unit, give me more details, a link and pictures would be nice.

  • fawzi
    fawzi
    09 April 2011 am30 01:01 |

    i have roadrover DDin is possible to change only the interface and the icons and is there is any patch for this one ?

  • Petrut
    Petrut
    08 April 2011 pm30 19:32 |

    my patch doesn`t remove original interface, will close it and run another one. So you can always come back to original interface. Please note that my interface is ONLY in gps menu/board.

  • Massy
    Massy
    08 April 2011 am30 11:53 |

    Hi Petrut, if i buy your wince5 patch, and after i want to come back original dynavin interface...i can? thank you

  • Petrut
    Petrut
    05 April 2011 pm30 17:27 |

    Hi, Garmin is not included, sorry, i can`t include navigation softwares, not legal. Is icon only.
    But my patch will help you install Garmin on Dynavin, you can add the missing dll files in windows folder at boot, i think the missing files are the garmin issue on chinese devices.
    Is very easy to install, just press install.exe and wait to finish.
    Absolutely no risk for your device, see my feedback on e46fanatics.

  • lynx
    lynx
    05 April 2011 pm30 17:18 |

    Hi Petrut,
    In the forum section "Patch Details" Garmin icon is displayed.
    Is there a working version of Garmin included in your patch?
    I have not heard until now successfully installed Garmin MXT in 800x480 resolution (Dynavin unit).
    In my country Garmin is the best navigation.
    The reason is the coverage of the maps.

    My second question is:
    Is it difficult to install your patch and is it dangerous?
    If a potential conflict it possible to restore the old software or any other solution?
    Thank you!

  • syurv
    syurv
    04 April 2011 pm30 21:53 |

    Good fellows! An excellent software, excellent work! Many thanks!

  • Petrut
    Petrut
    03 April 2011 pm30 16:08 |

    Hi, my patches will work with any dynavin unit.
    You become a member when you purchase the patch, an account is created then.

  • Ian Ward
    Ian Ward
    03 April 2011 pm30 14:36 |

    About to buy the DVN-MBE from Dynavin. Will your patches work with it? Also, where is the link to become a member here? tks

  • Petrut
    Petrut
    02 April 2011 am30 09:02 |

    thanks !

  • Dan
    Dan
    02 April 2011 am30 08:55 |

    Fantastic and unique development on Win CE platforms! Congratulations for your new website!